• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.5
• /
• pp.90-96
• /
• 2017

Due to the merit of having wide range with low cost, HF radar's ship detection and tracking research as maritime surveillance system has been recently studied. Many ship detection and tracking algorithms have been developed so far, however, performance comparison cannot be conducted properly because the states of target ships (such as moving path, size, etc.) differ from each study. In this paper, we propose a simulator based on compact HF radar, which generates data according to the size and moving path of target ship. Given the generated data with identical ship state, it is possible to conduct performance comparison. In order to validate the proposed simulator, the simulated data has been compared with real data collected by the SeaSonde HF radar sites. As a result, it has been shown that our simulated data resembles the real data. Therefore, the performance of various detection or tracking algorithms can be compared and analyzed respectively by using our simulated data.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.5
• /
• pp.218-232
• /
• 2022

Researches are underway to use a radar sensor, a sensor used for object recognition in vehicles, for position estimation. In particular, a method of classifying dynamic and static objects using the Doppler velocity, the output from the radar sensor, and calculating ego-motion using only static objects has been researched recently. Also, for the existing dynamic object classification, several methods using RANSAC or robust filtering has been proposed. Still, a classification method with higher performance is needed due to the nature of the position estimation, in which even a single failure causes large effects. Hence, in this paper, we propose a method to improve the classification performance compared to existing methods through tracking and filtering of dynamic objects. Additionally, the method used a GMPHD filter to maximize tracking performance. In effect, the method showed higher performance in terms of classification accuracy compared to existing methods, and especially shows that the failure of the RANSAC could be prevented.

• Journal of IKEEE
• /
• v.19 no.4
• /
• pp.566-572
• /
• 2015

In this paper, we calculate monostatic RCS(Radar Cross Section) and bistatic RCS for improving the Performance of the skin tracking of KSLV-II and the results were compared. EM(Electromagnetic) simulator was used for numerical analysis. For the two paths(L, S), after the vehicle was launched, RCS was calculated for region from 280 to 400 seconds. In the case of using the bistatic radar system, when the vehicle was launched to the L path, tracking performance was better when we receive RCS in Jeju than in Goheung. When the vehicle was launched to the S path, tracking performance was better when we receive RCS in Goheung than in Jeju. In the case of using the monostatic radar system, when the vehicle was launched to the L path, tracking performance was better when we receive RCS in Goheung than in Jeju. When the vehicle was launched to the S path, tracking performance was better when we receive RCS in Jeju than in Goheung.

• Journal of Navigation and Port Research
• /
• v.39 no.4
• /
• pp.307-312
• /
• 2015

ARPA(Automatic Radar Plotting Aid) is a device to calculate CPA(closest point of approach)/TCPA(time of CPA), true course and speed of targets by vector operation of relative courses and speeds. The purpose of this study is to develop target acquisition and tracking technology for ARPA Radar implementation. After examining the previous studies, applicable algorithms and technologies were developed to be combined and basic ARPA functions were developed as a result. As for main research contents, the sequential image processing technology such as combination of grayscale conversion, gaussian smoothing, binary image conversion and labeling was deviced to achieve a proper target acquisition, and the NNS(Nearest Neighbor Search) algorithm was appllied to identify which target came from the previous image and finally Kalman Filter was used to calculate true course and speed of targets as an analysis of target behavior. Also all technologies stated above were implemented as a SW program and installed onboard, and verified the basic ARPA functions to be operable in practical use through onboard test.

• Journal of electromagnetic engineering and science
• /
• v.18 no.4
• /
• pp.231-241
• /
• 2018

In this paper, we consider the anti-attack procedure of a ballistic missile defense system (BMDS) at different operating frequencies at its phased-array radar station. The interception performance is measured in terms of lateral divert (LD), which denotes the minimum acceleration amount available in an interceptor to compensate for prediction error for a successful intercept. Dependence of the frequency on estimation accuracy that leads directly to prediction error is taken into account, in terms of angular measurement noises. The estimation extraction is performed by means of an extended Kalman filter (EKF), considering two typical re-entry trajectories of a non-maneuvering ballistic missile (BM). The simulation results show better performance at higher frequency for both tracking and intercepting aspects.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.4
• /
• pp.685-694
• /
• 2018

In this paper, we designed and fabricated the frequency mixer, which is the core parts of high frequency head in Ku-band tracking radar. To overcome the problem of single-ended and single-balanced resistive structure, we designed the fine-line structure with balanced mixer, to generate IF signal without distortion in L-band, after receiving the RF signal of the Ku-band. The prototype mixer showed a Noise Figure Max of 6.823dB, Gain of 4.1598~4.676dB and Band Pass of 61MHz in 5 Ku-band samples frequency.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.9
• /
• pp.2846-2866
• /
• 2022

Caenorhabditis elegans exhibits sophisticated chemotaxis behavior through two parallel strategies, klinokinesis and klinotaxis, executed entirely by a small nervous circuit. It is therefore suitable for inspiring fast and energy-efficient solutions for autonomous navigation. As a random search strategy, the Lévy walk is optimal for diverse animals when foraging without external chemical cues. In this study, by combining these biological strategies for the first time, we propose a spiking neural network model for search and contour tracking of specific concentrations of environmental variables. Specifically, we first design a klinotaxis module using spiking neurons. This module works in conjunction with a klinokinesis module, allowing rapid searches for the concentration setpoint and subsequent contour tracking with small deviations. Second, we build a random exploration module. It generates a Lévy walk in the absence of concentration gradients, increasing the chance of encountering gradients. Third, considering local extrema traps, we develop a termination module combined with an escape module to initiate or terminate the escape in a timely manner. Experimental results demonstrate that the proposed model integrating these modules can switch strategies autonomously according to the information from a single sensor and control steering through output spikes, enabling the model worm to efficiently navigate across various scenarios.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.2
• /
• pp.59-64
• /
• 2024

The small tracking radar randomly changes the transmission period to avoid deceptive signals such as RGPO (Range Gaet Pull Off) operated on the target. Since the code repeats after a specific section, it becomes difficult to avoid a deceptive signal when the repetition is exposed. In this paper, a more realistic transmission pulse code is generated by adding random code generation through FPGA and system white noise. We present the research results of code generation that generates PRF that can avoid repetition while using pseudo-random code in EPROM using FPGA. Also, the result of designing random PRF pulse was confirmed by applying it to tracking radar.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.1
• /
• pp.233-237
• /
• 2014

According to advance of radar technology and increase of air threat, 3D surveillance radars are preferred as shipboard equipments to shorten reaction time. In this paper, reaction time against air target was calculated by simulation in each case, 2D and 3D surveillance radar and it was suggested that a few parameters including purpose of warships, performance of shipboard equipments, threat of surrounding countries and budget to select the reasonable type of radar.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1797-1801
• /
• 2004

In this paper we show the hardware testbed and software simulator of multi function array radar (MFAR). The hardware MFAR is simple and flexible hardware to implement various radar beamforming and detecting algorithms. To overcome the limitation of hardware MFAR, the software simulator is proposed. User can simulate radar under the various environment conditions adjusting the parameter of simulator. User can set environment of radar, such as the location and velocity of target, jammer and the terrain clutter. The radar use various probing pulses and supports two operation mode, surveillance and tracking mode.