• 한국군사과학기술학회지
• /
• 제5권3호
• /
• pp.62-76
• /
• 2002

This paper describes the design of a Coordinates Tracking algorithm for EOTS and its error analysis. EOTS stabilizes the image sensors such as FLIR, CCD TV camera, LRF/LD, and so on, tracks targets automatically, and provides navigation capability for vehicles. The Coordinates Tracking algorithm calculates the azimuth and the elevation angle of EOTS using the inertial navigation system and the attitude sensors of the vehicle, so that LOS designates the target coordinates which is generated by a Radar or an operator. In the error analysis in this paper, the unexpected behaviors of EOTS that is due to the time delay and deadbeat of the digital signals of the vehicle equipments are anticipated and the countermeasures are suggested. This algorithm is verified and the error analysis is confirmed through simulations. The application of this algorithm to EOTS will improve the operational capability by reducing the time which is required to find the target and support especially the flight in a night time flight and the poor weather condition.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2016년도 춘계학술대회
• /
• pp.302-304
• /
• 2016

The purpose of this paper is to draw comparison between the performance of ${\alpha}-{\beta}-{\gamma}$ filter and Kalman filter of a tracking module for ARPA system on board high dynamic warship. The comparison is based on the filters' capability to reduce residual error and maintain a stable transient response. The residual error is computed from the difference between the observed the predicted positions for the entire tracking period. The results indicate that the Kalman filter has a higher tracking accuracy compared to the optimal ${\alpha}-{\beta}-{\gamma}$ filter. However, both filters have a similar transient response.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2016년도 춘계학술대회
• /
• pp.305-307
• /
• 2016

The purpose of this paper is to determine the optimal values of the gain parameters used in the tracking module for a highly dynamic warship. The algorithm of the tracking module uses the ${\alpha}-{\beta}-{\gamma}$ filter to compute accurate estimates and update the state variables, that is, positions, velocity and acceleration. The filtering coefficients ${\alpha}$, ${\beta}$ and ${\gamma}$ are determined from set values of the damping parameter, ${\xi}$. Optimization is achieved by plotting a range of the damping parameter ${\xi}$ against the corresponding residual error and then selecting the best value of ${\xi}$ with the minimum residual error. Optimal values of the smoothing coefficients are subsequently computed from the selected damping parameter, ${\xi}$.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.376-381
• /
• 1992

In this thesis, a self-tuning control method based on Variable Structure System technique for tracking control of Direct-Drive motor is presented. The self-tuning control could not make the tracking error zero in the transient period. This tracking error may be due to disturbances or the error in parameter identification. To overcome this problem, a self-tuning control method based on discrete time VSS technique is presented. The STC based on VSS technique gives good tracking performance of the reference signal in the transient period. The proposed controller is robust to parameter errors and disturbances. The performance of the proposed controller is compared with that of simple STC through digital computer simulation.

• 제어로봇시스템학회논문지
• /
• 제17권6호
• /
• pp.526-530
• /
• 2011

This paper presents a new fuzzy model-based design approach for waypoints-tracking control of nonlinear underwater vehicles (UUVs) on a horizontal plane. The waypoints-tracking control problem is converted into the stabilization one for the error model between the given nonlinear UUV and the waypoints. By using the sector nonlinearity, the error model is modeled in Takagi-Sugeno's form. We then derive stabilization conditions for the error model in the format of linear matrix inequality. A numerical simulation is provided to illustrate the effectiveness of the proposed methodology.

• 대한전기학회논문지
• /
• 제39권5호
• /
• pp.470-477
• /
• 1990

Singh's multi-level method is extended to the optimal tracking control of a large interconnected dynamical system which has coupled states and coupled inputs. The steady-state tracking error and a convergence condition for the extended multi-level method are derived analytically and the results show that the steady-state tracking error and a convergence rate have to be compromised. Also, a new multi-level method which is advantageous over the Singh's method in steady-state tracking error and computational burden is proposed by introducing nominal inputs into the performance index. The resulting feedback gain matrix and the compensation vector are optimal for all initial conditions so that eventual on-line computation is minimal.

• 전기학회논문지
• /
• 제66권1호
• /
• pp.153-158
• /
• 2017

This paper investigates a robust low-complexity design problem for tracking control of uncertain switched pure-feedback systems in the presence of unknown control direction. The completely unknown non-affine nonlinearities are assumed to be arbitrarily switched. By combining the nonlinear error transformation technique and Nussbaum-type functions, a robust tracking controller is designed without using any adaptive function approximators. Thus, compared with existing results, the proposed control scheme has the low-complexity property. From Lyapunov stability theory, it is shown that the tracking error remains within the preassigned transient and steady-state error bounds.

• 대한기계학회논문집A
• /
• 제29권1호
• /
• pp.115-123
• /
• 2005

This paper presents the development of an algorithm for position control of feed drives in machine tools. The algorithm is constructed through an experimental method based on proportional control with a ramp input. In the first step of designing, a tracking-error curve is generated with the proportional control, and then an error model is decided to reduce the tracking error, Next, the output signal of the error model is added to the current error signal to yield the actuating error signal. The effectiveness of the proposed scheme is confirmed through simulation and experiments.

• 로봇학회논문지
• /
• 제17권2호
• /
• pp.142-151
• /
• 2022

With the advent of the 4th industrial revolution, autonomous driving technology is being commercialized in various industries. However, research on autonomous driving so far has focused on platforms with wheel-type platform. Research on a tracked platform is at a relatively inadequate step. Since the tracked platform has a different driving and steering method from the wheel-type platform, the existing research cannot be applied as it is. Therefore, a path-tracking algorithm suitable for a tracked platform is required. In this paper, we studied a path-tracking algorithm for a tracked platform based on a GPS sensor. The existing Pure Pursuit algorithm was applied in consideration of the characteristics of the tracked platform. And to compensate for "Cutting Corner", which is a disadvantage of the existing Pure Pursuit algorithm, an algorithm that changes the LAD according to the curvature of the path was developed. In the existing pure pursuit algorithm that used a tracked platform to drive a path including a right-angle turn, the RMS path error in the straight section was 0.1034 m and the RMS error in the turning section was measured to be 0.2787 m. On the other hand, in the variable LAD algorithm, the RMS path error in the straight section was 0.0987 m, and the RMS path error in the turning section was measured to be 0.1396 m. In the turning section, the RMS path error was reduced by 48.8971%. The validity of the algorithm was verified by measuring the path error by tracking the path using a tracked robot platform.

• 융합정보논문지
• /
• 제11권8호
• /
• pp.23-28
• /
• 2021

본 논문에서는 재귀형 크로스아이(retrodirective cross-eye) 재머 신호와 레이다 반사 신호 비(Jamming and radar return Signal Ratio: JSR)에 따른 모노펄스 레이다의 추적 오차의 변화를 분석하였다. 레이다 추적 오차를 계산하기 위한 방법으로 크로스아이 재머 이득(G_c)이 사용되었고, 재머 이득과 재머 신호와 레이다 반사 신호의 비(JSR)의 관계를 수식으로 표현하였다. 모노펄스 레이다와 재머 사이의 조우각과 JSR을 동시에 변화 시키면서 레이다 추적 오차를 분석하였다. 그리고 재머 두 신호간의 위상(ϕ) 차이와 JSR의 변화를 분석 한 결과 두 재머 신호 위상 차이가 180°에 가까워질수록 추적 오차가 커지고 JSR이 20dB이상이 되면 추적 오차가 일정 수준을 유지하게 되는 것을 볼 수 있다. 본 연구는 레이다 반사 신호의 비(JSR)에 따른 모노펄스 레이다의 추적 오차에 대한 결과를 제시하였고 추적 방향, 두 재머 신호 위상차, 두 재머 신호 크기 비율 등에 따른 복합적인 추적오차 분석 결과를 제시하였다.