• 풍력에너지저널
• /
• 제2권1호
• /
• pp.74-81
• /
• 2011

This paper deals with the application of LQ control to the power curve tracking control of wind turbine. However, two more additional tasks are required to apply the LQR theory to wind turbine control. One is the tracking problem instead of regulation, because the wind turbine is controlled as variable speed and variable pitch. The other is LQ integral control., because the rotor speed should be tightly controlled without any steady state error. Starting from the analysis of wind characteristics, design requirement of a wind turbine control system is defined. A design procedure of LQ tracking with integral control is introduced. The performance of LQ tracking system is analyzed and evaluated by numeric simulation.

• 한국정보과학회논문지:시스템및이론
• /
• 제29권10호
• /
• pp.582-588
• /
• 2002

확장형 디스플레이(Scalable Display)는 큰 화면과 높은 화질의 영상을 생성하여 사용자들에게 보다 현실적인 느낌을 주고 이에 몰입할 수 있는 환경을 제공하는 시스템이다. 최근 들어서 이러한 확장형 디스플레이는 자체 그래픽 가속기와 메모리, CPU, 저장장치를 갖는 개별 PC들을 네트워크로 연결한 클러스터 환경에서 구축되고 있다. 하지만 클러스터 환경에서 분산 렌더링을 수행하면 제한된 대역폭 때문에 네트워크 병목점을 갖게 된다. 본 논문은 이러한 네트워크 트래픽을 줄이는 새로운 알고리즘을 제안하고, 이를 기존의 분산 렌더링 시스템에 적용하여 구현한 내용을 소개한다. 제안하는 기하 추적(geometry tracking) 알고리즘은 전송되는 데이터들을 색인화하여 중복된 기하정보 전송을 방지하여 네트워크 부하를 줄이는 방법으로, 실험을 통해서 최대 42%까지 네트워크 트래픽을 감소시킬 수 있었다.

• 한국인터넷방송통신학회논문지
• /
• 제21권6호
• /
• pp.49-55
• /
• 2021

최근 소형 추적 레이더는 다양한 환경에서 표적을 획득하고, 추적하여 한 번의 타격으로 표적의 시스템을 무능화 시킬 수 있는 높은 거리해상도를 갖는 소형 밀리미터파 추적 레이더 개발을 요구한다. 높은 거리해상도를 갖는 소형 밀리미터파 추적 레이더는 넓은 대역폭의 신호를 실시간으로 처리하고, 소형 추적 레이더의 성능 요구 조건을 충족할 수 있는 신호처리기의 구현이 필요하다. 본 논문에서는 소형 밀리미터파 추적 레이더의 신호처리기 역할과 기능을 수행할 수 있는 신호처리기를 설계하였다. 소형 밀리미터파 추적 레이더를 위한 신호처리기는 8채널에서 입력되는 OOOMHz의 중심주파수와 OOOMHz 대역폭의 신호를 실시간으로 처리하기를 요구한다. 신호처리기의 요구사항을 만족하기 위해 고성능 프로세서 및 ADC (Analog-to-digital converter) 적용과 FPGA (Field Programmable Gate Array)를 활용한 DDC (Digital Down Converter), FFT (Fast Fourier Transform) 등의 전처리 연산을 적용하여 신호처리기를 설계하였다. 마지막으로 소형 밀리미터파 추적 레이더를 위한 신호처리기의 성능시험을 통하여 구현한 신호처리기를 검증하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.775-779
• /
• 2001

In optical disk drive (ODD), disk rotation speed has been increasing rapidly to achieve high data transfer rate. High servo bandwidths for focusing and tracking actuator are required to follow dynamic disturbance by high rotation speed in ODD. However, the servo bandwidth is significantly limited by some vibration modes which are induced by the flexibility of moving part. In this work, the vibration modes affecting bandwidth of actuators are suppressed by modifying actuating force by VCM. For this, the relation between the horizontal component of the actuating force and vibration mode is analyzed and force characteristic affecting to vibration mode is obtained through electromagnetic and structural analysis using simulation program.

• 한국항행학회논문지
• /
• 제1권1호
• /
• pp.70-80
• /
• 1997

본 논문에서는 CDMA 이동전파 환경에서 두 가지 비동기식 동기 추적 회로 즉, TCTL과 MCTL의 성능을 비교, 분석한다. 먼저, 두 가지 방식에 대해 안정 상태에서의 지터 분산을 펄스 성형 필터, 타이밍 오프셋, 신호 대 잡음 비 및 루우프 대역폭의 함수로 이론적으로 유도한다. 또한, 루우프 필터의 설계 방법에 대해 2차 동기 추적회로를 중심으로 고찰한다. 끝으로, 동기 추적 오차에 의한 BER 성능 저하를 ETRI 에 의해 IMT-2000용으로 설계된 CDMA 시스템의 역방향 링크에 대해 분석한다.

• International Journal of Control, Automation, and Systems
• /
• 제3권3호
• /
• pp.461-468
• /
• 2005

This paper proposes a wheel-assembly automation system, which assembles a wheel into a hub of a vehicle hung to a moving hanger in a car manufacturing line. A macro-micro manipulator control strategy is introduced to increase the system bandwidth and tracking accuracy to ensure insertion tolerance. A camera is equipped at the newly designed wheel gripper, which is attached at the center of the end-effector of the macro-micro manipulator and is used to measure position error of the hub of the vehicle in real time. The redundancy problem in the macro-micro manipulator is solved without complicated calculation by assigning proper functions to each part so that the macro part tracks the velocity error while the micro part regulates the fine position error. Experimental results indicate that tracking error satisfies the insertion tolerance of assembly $({\pm}1mm)$, and thus it is verified that the proposed system can be applied to the wheel assembly task on a moving hanger in the manufacturing line.

• 한국소음진동공학회논문집
• /
• 제14권4호
• /
• pp.295-302
• /
• 2004

In this study the optimization of a NFR suspension is performed using finite element method and experimental modal analysis. NFR suspensions are required to have low compliance modes to allow the slider to comply with the rotating disk, and high tracking stiffness modes to maximize the servo bandwidth of the tracking controller First of all, the dual suspension model is designed based on the characteristics of NFR drives. And the parametric study on the sensitivities of compliance modes and tracking stiffness modes is investigated. Finally, the model satisfying static characteristics is selected and shape optimization is performed to improve dynamic characteristics. A prototype of a NFR suspension is made by etching and modal ekperiment in free state is performed. The results of experiment almost agree with those of finite element method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.176-178
• /
• 2003

This paper presents a new velocity estimation strategy of a non-salient permanent magnet synchronous motor(PMSM) drive without high frequency signal injection or special PWM pattern. This approach is based on the d-axis current regulator output voltage of the drive system which has the information of rotor position error. The rotor velocity can be estimated through a rotor position tracking PI controller that controls the position error to aero. For zero and low speed operation, the PI gains of rotor position tracking controller have a variable structure. The PI tuning formulas are derived by analyzing this control system using the frequency domain specifications such as phase margin and bandwidth assignment.

• Journal of Power Electronics
• /
• 제7권1호
• /
• pp.1-12
• /
• 2007

Novel nonlinear backstepping control with integrated adaptive control function is developed for high-performance positioning control systems. The proposed schemes are synthesized by a systematic approach and implemented based on a modern low-cost DSP controller, TMS320C32. A baseline backstepping control scheme is derived first, and is then extended to include a nonlinear adaptive control against the system parameter changes and load variations. The backstepping control utilizes Lyapunov function to guarantee the convergence of the position tracking error. The final control algorithm is a convenient in the implementation of a practical 32-bit DSP controller. The new control system can achieve superior performance over the conventional nested PI controllers, with improved position tracking, control bandwidth, and robustness against external disturbances, which is demonstrated by experimental results.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.1146-1151
• /
• 2003

So far the study of near-field optical recording(NFR) suspensions has not been investigated sufficiently. In this study the optimization of a NFR suspension is performed using finite element method. NFR suspensions are required to have low compliance modes to allow the slider to comply with the rotating disk, and high tracking stiffness modes to maximize the servo bandwidth of the tracking controller First of all, a basic integrated type suspension model is obtained using topology optimization And the parametric study on the sensitivities of the compliance modes and tracking stiffness modes is performed. Finally, a model satisfying static characteristics is elected and shape optimization is performed to improve dynamic characteristics.