• 한국자동차공학회논문집
• /
• 제9권1호
• /
• pp.205-215
• /
• 2001

In this study, modeling and analysis procedure for the dynamic analysis of a high mobility tracked vehicle system were studied. The vehicle model used in this investigation is assumed to be consist of two kinematically decoupled subsystems. The chassis subsystem consists of chassis frame, sprocket, support rollers, road wheels, idler wheel, road wheel arms and idle wheel arm, while the track subsystem is represented as a closed kinematic chain consisting of track links and end connectors interconnected by revolute joints with bushing. Nonlinear contact force module describing the interaction between track link, and sprocket, idler wheel, road wheel, support roller, ground was used. The effects of road wheel arms and idler wheel arm due to tension adjuster are also considered.

• 한국자동차공학회논문집
• /
• 제9권1호
• /
• pp.20-27
• /
• 2001

A variable configuration tracked vehicle(VCTV) is developed to reduce turning energy and improve climbing ability for stairs. This mechanism has four track T-type frames. By changing the driving direction, each track T-type frame rotates to minimize the contact area with ground. It also has better performance than other VCTV in energy consumption of turning. Futhermore this mechanism is more stable than other VCTV on the rough terrain. When climbing stairs, each track T-type frame rotates to obtain a front attack angle and keep stability on steep stairs. The design parameters of components of track T-type frames are optimized to enhance the performance of climbing stairs. Performance indices include a stable angle, a climbing ability, a height of the vertical obstacle. In case that the overall length of the mechanism is 0.2m, it is required that the radius of the wheels should be 5mm and the length track contacted with he ground should be 0.09m to climb higher and steeper stairs.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.115-119
• /
• 2007

In this paper, practical problems will be covered in applying preview control to real tracked vehicle systems. Previous researches about the preview control assume that the vehicle speed is constant and the actuators have full frequency bandwidth. However, in order to apply it to real systems, those should be taken into account. Therefore this paper show the algorithm to apply the preview control to speed changing vehicles and performance variation according to a restricted frequency bandwidth.

• 한국자동차공학회논문집
• /
• 제6권4호
• /
• pp.24-31
• /
• 1998

In this study, a procedure is presented for the dynamic analysis of a multibody tracked vehicle system. The planar vehicle model used in this investigation is assumed to consist of two kinematically decoupled subsystems. i.e., the chassis subsystem and track subsystem. The chassis subsystem includes the chassis frame, sprocket, idler and rollers, while the track subsystem is represented as a closed kinematic chain consisting of rigid links interconnected by revolute joints. The nonlinear contact force modules describing the interaction between track links, and sprocket, idler, rollers and ground will be developed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.115.2-115
• /
• 2002

A real-time vehicle simulation system is a key element of a driving simulator because accurate prediction of vehicle motion with respect to driver input is required to generate realistic visual, motion, sound and proprioceptive cues. In order to predict vehicle motion caused by various driving actions of the driver on board the simulator, the vehicle model should consist of complete subsystems. On this paper, a tracked vehicle dynamic model with high efficiency and effectiveness is introduced that has been implemented on a training driving simulator. The multi-body vehicle model is based on recursive formulation and has been automatically generated from a symbolic computation package develop...

• 소음진동
• /
• 제9권6호
• /
• pp.1259-1266
• /
• 1999

본 연구의 목적은 유연성 궤도 모델을 개발하여 고기동성 궤도차량의 다물체 동역학 해석에 응용하는 것이다. 유연성 궤도 모델을 개발하는데는 대체로 두 가지 어려운 문제가 따른다. 첫째로, 해의 안정성을 유지하기 위해 적분구간이 충분히 작아야 한다는 것이다. 즉, 궤도 링크 사이의 유연성 조인트 모델과 충격적인 접촉력에 따른 고진동 입력을 처리해야 한다. 둘째로, 3차원 다물체 궤도차량 모델에 대한 수 많은 운동 방정식을 풀어야 한다는 것이다. 따라서 궤도차량을 샤시와 궤도 부시스템으로 나누고 회귀적인 방법을 사용하여 운동방정식의 수를 최소화하였다. 본 연구에서 개발된 방법을 검증하기 위하여 차량의 가속, 고속주행, 제동, 선회 등의 시뮬레이션을 수행하였다.

• 품질경영학회지
• /
• 제51권2호
• /
• pp.297-313
• /
• 2023

Purpose: The purpose of this study is to investigate the causes of shifting errors reported in military tracked vehicles and to improve related quality to prevent recurrence. Methods: A systematic disassembly and inspection of the transmission is carried out and an experimental simulation is conducted to reproduce the shifting error phenomenon. Electrical characteristic tests are subsequently performed and microscopic observation is also carried out on the disassembled connector parts such as pins and fractured surfaces. Results: Oil contamination and swelling deformation are observed in the connector to the vehicle due to oil leakage of its counterpart connector to the transmission. This causes electrical contact failure between both connectors in the fastened state, and it is found that shifting error of the tracked vehicle could occur subsequently. To prevent the recurrence of this phenomenon, comprehensive quality improvement is conducted including product improvement of the wiring harness assembly and strengthening activities for quality control and preventive maintenance. Conclusion: This study is expected to be helpful as a prior case study for cause analysis and recurrence prevention in the event of similar cases in the future.

• 대한기계학회논문집A
• /
• 제24권10호
• /
• pp.2603-2609
• /
• 2000

In this paper, track tension estimation methods are developed for tracked vehicles which are subject to various maneuvering tasks such as longitudinal driving on sloping and/or rough roads. The information of the track tension is very important for the tracked vehicles because the track tension is closely related to the maneuverability and the durability of the tracked vehicles. A modified 3 DOF dynamics model is derived for the tracked vehicles and is utilized for estimating the tractive force and track tension for the longitudinal driving case. The tension estimation performance of the proposed methods is verified through the simulation of the Multi-body Dynamics tool. The simulation results demonstrate the effectiveness of the proposed method under various maneuvering tasks of the tracked vehicles.

• 한국지반공학회논문집
• /
• 제34권9호
• /
• pp.33-42
• /
• 2018

야지궤도차량 구동 시 무한궤도를 통해 전달된 엔진출력은 지반-궤도 접지면에서 지반을 전단시켜 슬립변위 및 지반추력을 발현시킨다. 이때 지반추력의 반력이 야지궤도차량의 구동력으로 작용하는데, 지반이 연약하여 구동에 필요한 지반추력을 확보하기 어려운 경우에는 무한궤도 표면에 그라우저를 부착하여 구동성능을 개선시킨다. 본 연구는 그라우저 효과를 적절히 고려하여 야지궤도차량의 지반추력을 평가하기 위한 기초연구로서 수행되었다. 우선 지반-궤도 접지면의 전단메커니즘을 바탕으로 그라우저가 부착된 야지궤도차량의 지반추력을 평가하기 위한 방법을 새로이 제안하였다. 이를 통해 그라우저가 야지궤도차량의 구동성능에 미치는 영향을 평가한 결과, 그라우저가 부착됨에 따라 야지궤도차량의 전체지반추력이 증가하여 구동성능이 개선되는 것을 확인하였다. 특히, 그라우저의 길이가 증가하고 간격이 가까울수록 전체지반추력 증가효과가 명확해지는 것으로 나타나, 그라우저 형상비(=간격/길이)가 작을수록 야지궤도차량의 구동성능을 더욱 크게 개선시킬 수 있을 것이라 판단된다.

• 한국산업융합학회 논문집
• /
• 제23권3호
• /
• pp.445-452
• /
• 2020

The air cleaning unit of K00 IFV(or Infantry Fighting Vehicle) has important roles to make sure the engine of the vehicle works precisely as filtering foreign substances in the air such as dust and sands. The entire components including scavenge fan which is one of the important inner part of the air cleaning unit are developed so that we can produce it domestically and don't need to import it from P^⁎⁎ Co., the original maker in United Kingdom. This paper introduces a few verification processes including cleaning efficiency and reliability. As this core unit has developed successfully the improvement of military strength and logistics support can be expected. And design capability, manufacturing skills, maintenance ability of tracked weapon system will be increased thanks to the accumulated technical knowledge obtained from this developing project. Foreign currency savings and reducing operational cost can be expected as well in military industry.