• 공학교육연구
• /
• 제23권4호
• /
• pp.66-75
• /
• 2020

This study was conducted using the literature review and survey research to analyze the operational status and effectiveness of the single-track accredited program, which has been mandatory since 2016. The research targets to achieve the purpose of the study were the nationwide engineering education accreditation system operating colleges, departments, and engineering education innovation centers. Finally, 183 copies were collected from faculty members at 69 colleges and 554 copies at the department level. As a result of the survey, the college recognized more positively about the operation of the single-track accredited program, and more than 50% of respondents said that there were difficulties due to the operation of the system. The contents required were analyzed and presented. Based on this, the engineering education accreditation system, including the single-track accredited program, suggested the direction of support at the government level and the ABEEK level to better settle down in the field of engineering colleges.

• 한국항해학회지
• /
• 제20권3호
• /
• pp.65-71
• /
• 1996

Recently, the Track Control System which was separated from the Course Control System so-called Auto-Pilot has been developed for track-keeping in coastal area. From this year, the NAV Sub-committee in IMO commenced to consider the Performance Standard for the Track Control System vigorously. This system will be integrated with ECDIS and IBS so that captain/officers should analysis ship's motion characteristics accurately in the route planning using the electronic nautical charts. In this paper, a new Route Analysis Algorithm using fuzzy reasoning in route planning was proposed for 2, 700 TEU container ship. In order to verify the track-keeping, the author established a ship mathematical model and executed the simulation of the Route Analysis Algorithm at on-line condition with Pentium PC. The results of ship trajectories of the Route Analysis Algorithm were found to be effective to get track control automatically.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.886-891
• /
• 2004

The process of determining whether, when, where and how to intervene, of deciding on optimum allocation of resources and minimizing the cost is a very complex problem: different track sections tend to behave differently under the effects of loading; decision-making processes for maintenance work are closely interrelated technically and economically; decision-making for maintenance plans is based on a large quantity of technical and economic information, extensive knowledge and above all experience. For that reason, It is considered very important to develope objective and computer-aided decision-making support system for track maintenance plan. On this paper, we made a survey of the state-of-art of decision-making support systems for track maintenance which were developed and used abroad and reviewed requirements of system and present the plan of develope decision-making support system for track maintenance appropriate to local condition.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(II)
• /
• pp.104-110
• /
• 2003

Precast concrete slab track has been already turned out to be more efficient than cast-in place concrete slab track in view of the easiness of construction and the quality control of concrete. Thus, there is a great need to bring in the precast slab track system. In order to develop the realistic precast slab track system that is well conformed to our circumstances, the performance criteria of slab track, and the state-of-the art of precast slab track systems that are used in other countries are briefly discussed here.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.346-353
• /
• 2005

Track substructure(ballast, subgrade) should have sufficient strength and adequate stiffness to fully support track superstructure(rail, fastener, sleeper). Vertical support stiffness of track comes from the sufficient thickness, adequate strength and stiffness of material of substructure layers. Since the vertical support stiffness of track substructure is closely related with the track geometry, the evaluation of the stiffness is very important to understand the track states. This paper introduces the system, which are composed of Ground Penetrating Radar(GPR), Portable Ballast Sampler(PBS), and Light Falling Weight Deflectometer(LFWD), to evaluate substructure condition and summarizes the field test results performed with the reliable system.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.76-81
• /
• 2002

The characteristics of the track are important concerning the mobility of tracked vehicles. It can be represented in terms of the track tension and maintaining the track tension adequately guarantees the stable and improved driving of the tracked vehicles. The track tension must be known in order to be controlled and it needs to be estimated in real-time because it is difficult to be measured. The tension around idler and sprocket can be controlled by the frizzy logic control system base on the estimated values. Dynamic Track Tensioning System(DTTS) which is estimating and controlling the track tension. In this paper, simulation tool is developed in order to apply the DTTS to real battle tanks. To construct the simulation tool, the Modeling the tracked vehicle, constructing estimation system, and designing controller should be achieved first and then all subsystem should be organized in one. The simulation tool make the RecurDyn model of tracked vehicle, which is plant model, and the control system exchange their data simultaneously. Simulation with many kinds of driving conditions and road conditions is carried out and the results are interpreted. The interpretation provides necessary information to apply the DTTS to real battle tanks.

• 전기학회논문지
• /
• 제62권10호
• /
• pp.1458-1464
• /
• 2013

This paper proposed a new real time catenary impedance estimation technique using synchronized power data from the measured data of operating vehicle and substation for catenary protective relay and fault locator setting. This paper presented estimation equation of catenary impedance using synchronized power data between substation and vehicle of AT feeding system for the performance verification of the proposed technique. Also AC feeding system is modeled through power analysis program and performance was verified through simulation according to various load changes. We verified that average 2.38%(distance equivalent 23.8 m) error appeared between the proposed estimation equation of catenary impedance and power analysis program simulation output in no connection double track system between up track and down track. Furthermore, We confirmed that estimation error is bigger depending on the increasing the distance from substation and vehicle impedance using only using vehicle current when calculating vehicle impedance in connection double track system between up track and down track. But, We confirmed that the proposed technique estimated accurately catenary impedance regardless of vehicle impedance and distance from substation.

• 제어로봇시스템학회논문지
• /
• 제10권11호
• /
• pp.1089-1094
• /
• 2004

Diseases in the gastro-intestinal track are on an increasing trend. In order to diagnose a patient, the various signals of the digestive organ, such as temperature, pH, and pressure, can offer the helpful information. Among the above mentioned signals, we choose the pressure variation as a monitoring signal. The variation of a pressure signal of the gastro-intestinal track can offer the information of a digestive trouble or some clues of the diseases. In this paper, a pressure monitoring system for the digestive organs of a living pig is presented. This system concept is to transmit the measured biomedical signals from a transmitter in a living pig to wireless receiver that is positioned out of body. The integrated solution includes the following parts: (1) the swallow type pressure capsule, (2) the receiving set consisting of a receiver, decoder box, and PC. The merit of the proposed system if that the monitoring system can supply the precise and repeatable pressure in the gastro-intestinal track. In addition, the design of low power consumption enables it to keep sending reliable signals while the pressure capsule is working in the digestive organ. The subject of the study for the pressure monitoring system is in-vivo experiments for a living pig. We achieved the pressure tracings in digestive organs and verified the validity of system after several in-vivo tests using pressure monitoring system. As a result, we found each organ has its own characterized pressure fluctuation.

• 조명전기설비학회논문지
• /
• 제24권1호
• /
• pp.160-166
• /
• 2010

철도와 도로가 평면 교차하는 개소에서 열차의 진입을 통행자에게 알려 사고를 방지하는 운전보안설비를 건널목 보안장치라 하며, 이 장치는 레일을 전기회로의 일부로 사용하여 회로를 구성하고 철도차량의 차축에 의해 레일사이를 단락함에 따라 열차의 유무를 검지하는 궤도회로장치에 의한 것이 대부분이다. 그 만큼 건널목보안장치에서 궤도회로장치가 중요한 역할을 하지만, 열차운행 횟수 감소로 눈, 비, 습기 등에 의하여 레일에 녹이 발생하여 열차가 궤도회로를 점유하여도 단락감도 불량으로 궤도회로가 낙하되지 않아 건널목보안장치 무경보 발생으로 도로차량과 충돌하는 사고발생이 우려된다. 본 논문에서는 이와 같은 문제점을 보완하기 위하여 열차에 의해 궤도를 단락하는 열차검지방식에서 적외선 센서에 의해 열차접근을 확인하여 건널목보안장치를 제어하는 방식으로 변경하여 열차안전운행을 확보하는 효율적인 안전장치로서의 역할을 수행할 수 있도록 설계 방법을 제안한다.

• 제어로봇시스템학회논문지
• /
• 제22권2호
• /
• pp.162-169
• /
• 2016

Gyeong-bu railway line in Korea between Seoul and Cheon-an was built as two double tracks. A four-display signaling system, only for the metro line, was installed on the second double track so KTX and conventional trains can only operate on the first double track. This study suggests a method to allow KTX and conventional trains operated on the five-display signaling system to respond to accidents and track defects on the second double-track under the four-display signal system by means of problem analysis, calculation of breaking distances for KTX and conventional trains at each break mode, and improvement of the ATS system.