• Analytical Science and Technology
• /
• 제32권6호
• /
• pp.233-242
• /
• 2019

Substance identification is the first step of the REACH registration. It is essential in terms of Classification, Labelling and Packaging (CLP) regulation and because even trace amounts of impurities or additives can affect the classification. In this study, a scheme for the screening, quantification, and interpretation of trace amounts of hazardous inorganic substances is proposed to detect the presence of more than 0.1% hazardous inorganic substances that have been affecting the hazard classification. An exemplary list of hazardous inorganic substances was created from the substances of very high concern (SVHCs) in REACH. Among 201 SVHCs, there were 67 inorganic SVHCs containing at least one or ~2-3 heavy metals, such as As, Cd, Co, Cr, Pb, Sb, and Sn, in their molecular formula. The inorganic SVHCs are listed in excel format with a search function for these heavy metals so that the hazardous inorganic substances, including each heavy metal and the calculated ratio of its atomic weight to molecular weight of the hazardous inorganic substance containing it, can be searched. The case study was conducted to confirm the validity of the established scheme with zinc oxide (ZnO). In a substance that is made of ZnO, Pb was screened by XRF analysis and measured to be 0.04% (w/w) by ICP-OES analysis. After referring to the list, the presence of Pb was interpreted just as an impurity, but not as an impurity relevant for the classification. Future studies are needed to expand on this exemplary list of hazardous inorganic substances using proper regulatory data sources.

• Bulletin of the Korean Chemical Society
• /
• 제30권2호
• /
• pp.368-372
• /
• 2009

The trace polymer and additives in used stripper solutions were analyzed by a combination of Py-GC/MS and ESI-MS. In the comparison of the pyrolysates produced by the pyrolysis of the pure stripper and photoresist at $500{^{\circ}C}$, the presence of novolac polymer in the used stripper was confirmed by the presence of the characteristic peaks of its pyrolysates, such as those of the methylphenol, di-methylphenol and methylenebis(methylphenol) isomers. The intact trace polymer was measured by ESI-MS, which showed the distribution of oligomers at intervals of 120 Da, indicating di-methylphenol to be the repeat unit. Additional MS/MS measurements demonstrated that the end group is methylphenol and the repeat groups are di-methylphenol. Some modified oligomers caused by the methylation or di-methylation of the repeat unit were also identified. Although the polymer is only present at a trace level in the used stripper, these combined analytical methods provided the means to qualify the stripper solution through the identification and structural determination of the polymer.

• YAKHAK HOEJI
• /
• 제4권1호
• /
• pp.8-11
• /
• 1959

The method for the estimation of trace elements in hair is studied on this paper modifying the circular paper chromatography method shown by Giri and Balakrishnan for the estimation of vitamins from the multivitamin preparation. The elements studied are Ni, Al, Mn, Mg, Zn, Ca, Co, Cu, and Fe. The content of the element is estimated quantitatively by comparison the size and the color density of spots of the standard chromatogram prepared by the known amount of each standard substance and the chromatogram prepared from sample solution, after checking those chromatogram qualitatively. The comparative study has been made between the results from this method and the results from the other methods which are applying routinely at this laboratories. The experimental errors at each elements were within 10% limits. There was no interference between each elements. It is recommendable that this method can be applied to treat numerous speciemens saving times within experimental error of 10%.

• Nutritional Sciences
• /
• 제9권3호
• /
• pp.190-194
• /
• 2006

Silajit is a blackish brown pitch-like gummy substance. It is an important Unani and Ayurvedic medicine widely used in the treatment of many diseases and as nutritional supplement It is found in certain mountainous regions of Pakistan, Afghanistan, India, Nepal, Australia and Russia. Silajit samples of Pakistani origin were obtained from different sources and analyzed for their physical characteristics and biochemical & elemental composition. X-ray diffraction studies on Silajit showed that it is an amorphous substance and has no crystalline structure. Also, pH studies of Silajit (2 g/L of water) indicated that it was slightly acidic in nature and ranged from 3.45 to 7.23. Conductivity ranged from 157.7 to 330. Amino acid analysis revealed that Silajit contained lysine and alanine in higher amounts than all other amino acids and ranged from 1456 to 2240 and 68 to $1615{\eta}mole/g$, respectively. Mean concentration of arsenic, mercury, cadmium, lead, copper and zinc was 73.15, 104.92, 0.496, 3.89, 4.04 and 17.23 ppm, respectively. Silajit samples were also analyzed for calcium, potassium and sodium.

• Environmental Analysis Health and Toxicology
• /
• 제21권2호
• /
• pp.173-184
• /
• 2006

From the harmfulness expectation test conducted through a toxicity anticipation program, methylcyclohexane turned out to be harmful and simulative, but no carcinogenicity was anticipated. In a four-hour acute inhalation toxicity test, the result showed that lethal concentration ($LC_{50}$) was 3,750 ppm (15,054 mg/L), which was identified as a harmful substance on the basis of the harmful substance classification standard $2 of the Industrial safety and health law. methylcyclohexane fell under the category $4(2,500 substance from the GHS standard acute toxicity harmfulness classification. Also, from subchronic inhalation toxicity test that included 6 hours a day, five days a week, and for 13 weeks, we could observe weight, activity, long term weight, blood and blood biochemical influence from the exposure of test substance. No-observed effect level (NOEL) was determined below $100{\sim}400ppm$ inboth male and female. This material falls under the Category 2 ($50{\sim}250ppm/6hours/90days$) in the GHS (Globally Harmonized System) standard trace long-term whole body toxicity repeated exposure, and can be classified as a harmful substance in accordance with the Industrial Safety and Health Law harmful substance standard $NOEL{\leq}0.5mg/L/6hr/90day$ (rat).

• Applied Chemistry for Engineering
• /
• 제17권2호
• /
• pp.119-124
• /
• 2006

Natural organic matter (NOM) should be carefully considered in terms of its constituent and effect because NOM is complex substances that occur in spatially and seasonally varying concentrations in natural water. This review presents characteristics of natural organic matter present in water. These compounds mainly include humic substances, carbohydrates, proteins (amino acids), hexosamines, fats, oils, greases, and trace organic compounds (endocrine disrupting chemicals and pharmaceuticals and personal care products).

• Journal of Korean Society on Water Environment
• /
• 제21권5호
• /
• pp.431-441
• /
• 2005

The study was carried out to improve and regulate the drinking water quality standard and drinking water quality monitoring substances. For the reliability and safety of finished water, It has been monitored for trace organic and inorganic compounds of 333 in finished water of water treatment plants during 1989 to 2003. As a result of monitoring, 51 compounds were detected from 333 compounds, and it has been regulated the drinking water quality standard of 26 substances and 20 mitoring substance. Improvement and regulation method of the drinking water quality standard was performed by comparing and analyzing with detection concentration, detection frequency, risk assessment and foreign drinking water quality standard.

• The Journal of Engineering Geology
• /
• 제16권4호
• /
• pp.351-357
• /
• 2006

Recently there is increasing the flow of hazardous chemical substances caused by industrial waste waters into a main river. It is needed to make the high treatment in drinking water treatment plants for reducing a health risk. Therefore, the monitoring of trace hazardous chemical substances by the industrial waste water inflow is available increasing economical efficiency of river management as well as reduction of risk. In this study, the most important substance among numerical and quantitative trace hazardous chemicals is Hexachlorobutadiene in an effluent of industrial wastes. However all items of GroupII which was included with semiconductor, electricity/electron and metal assemble was not detected. It means that we must consider the characteristics and behavior of load pollutants to water resources to select monitoring items. That was called 'preparatory monitoring'. We can reduce an economical consumption as well as risks from these pollutants using the preparatory monitoring.

• Journal of Animal Science and Technology
• /
• 제63권1호
• /
• pp.160-169
• /
• 2021

Boiled feed is obtained by mixing and boiling agricultural by-products such as rice straw, rice bran, and bean curd with grains. The study explored the change in fatty acid, free amino acid, nucleotide, mineral, cholesterol, myoglobin and collagen of longissimus dorsi muscle in Hanwoo steers fed with boiled feed. Forty steers, 20 heads per group, were divided into two groups: a control group and a boiled feed group. The steers were raised for 10 months. The boiled feed group was enriched with palmitoleic acid, oleic acid, arachidonic acid and unsaturated fatty acids compared with the control group. There were no significant differences in amino acid and nucleic acid composition between the two groups. The boiled feed group contained higher levels of iron and manganese in the boiled feed group compared with the control group. The total cholesterol level was significantly increased, whereas calorie levels, myoglobin and collagen composition showed no differences. As the supply of boiled feed increases the content of fatty acids, unsaturated fatty acids and minerals related to flavor, it should be a feed that leads to the production of high-quality beef.

• Preventive Nutrition and Food Science
• /
• 제4권2호
• /
• pp.152-158
• /
• 1999

Polystyrene is frequently used for food packaging because of its eaxy processing rigidity , and low cost. Styrene, which is present in detectable amouts in the polymer, is usually considered to be the substance responsible for the possible tainting of a polystyrene-packed food by migration. The contamination of foods and beverages by trace amounts of materials which have migrated from plastics use din packaging is a concern both on the grounds of adversely affecting product quality and of food safety. These lead to increasing attention to the potentional hazards of a large variety of plastic materials and foods. In this paper we reviewed the history of Styrene and various analytical methods of sample preparation and detection to assess the extent to which styrene is present in food-grade polystrene materials and to what extent it leaked into foods and food stimulants.