• Fire Science and Engineering
• /
• v.28 no.1
• /
• pp.52-57
• /
• 2014

In this paper, the unsteady incompressible Navier-Stokes equations coupled with energy equation were solved to find out the optimal location of electrical heat trace for anti-freeze of water inside the pipe for fire protection. Since the conduction equation of pipe was coupled with the natural convection of water, the analysis of conjugate heat transfer was conducted. A commercial code (ANSYS-FLUENT) based on SIMPLE-type algorithm was used for investigating the unsteady flows and temperature distributions in water region. From the numerical experiments, the isotherms and the vector fields in water region were obtained. Furthermore, it was found that the lowest part of the pipe cross-section was an optimal position of electrical heat trace assuming the constant thermal expansion coefficient of water since the minimum temperature of the water with the position is higher than those with the other positions.

• Korean Journal of Pharmacognosy
• /
• v.22 no.3
• /
• pp.171-182
• /
• 1991

Several experiments were carried for the purpose of establishing the basis for the quality evaluation of deer horn. Deer horn originated from China, New Zealand, Soviet and Alaska were used as objectives and some constituents involved in deer horn were assayed and compared with one another. Five kinds of trace elements including Ca and Fe were determined by atomic absorbance spectroscopy. The more the region came down from the top of the deer horn, the more the ratio of Ca to Fe content (Ca/Fe) was increased. The same increasing tendancy was observed in the case of ash content. Gangliosides were isolated from deer horn by alumina column chromatography and identified by TLC using gangliosides Type II obtained from bovine brain as the standard material. The TLC chromatograms were scanned by dual wavelength TLC scanner, then those TLC profiles were compared. Deer horn from China and New Zealand were analogous but those from Soviet and Alaska were each distinguished in their TLC profiles.

• Journal of Conservation Science
• /
• v.10 no.1 s.13
• /
• pp.1-9
• /
• 2001

The objective of this study is to examine the characteristics of historical papers and cloths found at Neunggasa temple, Goheunggun, Chonnam Province, Korea, using light microscopy, image analysis and SEM-EDS for fiber morphology and trace metal composition. All papers were made from paper mulberry. Transparent membrane, which was separated from bast fiber, was unique in these fibers. The papers found on the wall of Daewungjun were most highly degraded and those of the books, which were excavated under Cheungwangmun, were relatively well preserved. The cloths found under the statue 'Dong-bangjiguk' were silk, very narrow fiber without any marks. In the analysis of SEM-EDS, high content of silica was detected. Also small content of calcium was taken into consideration. Content of iron and chlorine were discussed from the viewpoint of potentially harmful elements for the conservation of paper. The composition of trace elements could not be used to determine the origins of papers.

• Animal cells and systems
• /
• v.12 no.3
• /
• pp.165-170
• /
• 2008

Cuticular hydrocarbons(CHCs) of the epicuticle wax layer are so far used to differentiate the insects in species and subspecies levels. In this study, four species of malaria vectors(genus Anopheles) were collected from various localities in southern Iran. Twenty specimens of each species were randomly selected and one epicuticular extract was prepared of every five specimens. FID-GC profiles of the extracts did not show any qualitative difference. Using significant difference of CHC mass at retention time(RT) 39.6, the two species of An. sacharovi and An. fluviatilis could be distinguished. Similarly, the two species of An. superpictus & An. sacharovi and An. dthali & An. sacharovi were differentiated by their CHC level at RT 28.5. An. sacharovi was distinguished by integratable peaks at RTs 29.7, 30.6, 30.7, 31 and 32.6 while the other three species just indicated trace peaks at the same RTs. Similarly, An. dthali could be known by an integratable peak at RT 26.2 while An. fluviatilis and An. superpictus indicated trace peaks at the same RT. Integratable peaks and traces at RTs 27.4 and 28.5 were respectively used to differentiate An. superpictus from An. fluviatilis. Lastly, CHC trace amount of An. superpictus at RT 39.6 is another indicator to distinguish it from An. fluviatilis with an integratable peak at the same RT. In harmony with other studies worldwide we hereby report that quantitative analysis of CHCs was successfully applied to differentiate the four Anopheles species of southern Iran.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.27 no.1
• /
• pp.29-36
• /
• 2007

A study was conducted to determine the trace minerals (Cu, Fe, Cd, Zn, Mo, Se, Mn, Cr, Co, Ni) levels in pasture soils and forages collected in Jeju area. Chemical characteristics and total or soluble trace minerals levels in 187 pasture soil samples (76 very dark brown and 111 black soils) were measured. Total trace minerals contents in hay samples of 60 Italian ryegrass, alfalfa and mixture grasses each were assessed. The pasture soils of Jeju were characterized to have low pH (5.1) and to contain low levels of available $P_2O_5$ (20.5 mg/kg) and exchangeable Ca, Mg, K, Na (2.6, 0.9, 0.5, 0.2 cmol+/kg, respectively) when comparing to upland soils of Jeju or Korean mainland. All trace elements in total or soluble analysis of pasture soils were detected, and there was a big difference between total and soluble levels. The pasture soils tended to have the higher total Fe, Mn, Ni and Zn contents. Cr in all forages was not detected, but other trace minerals levels showed normal range. The hay samples of Italian ryegrass and mixture grasses produced in Jeju tended to contain higher Mn (105 vs 23 mg/kg) and lower Mo (2.7 vs 4.9 mg/kg) than those of alfalfa hay imported from USA. Results show that trace minerals of pasture soils and forages in Jeju seem to be not deficient, indicating that supplementation of some trace minerals are not always necessary in diets for grazing animals and should be done after careful evaluation of diets with regard to concentrations and biological availability of essential elements.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.10
• /
• pp.993-998
• /
• 2007

To verify the 2D or 3D positioning accuracy of a multi-axes stage is not easy, particularly, in the case the moving path of the stage is not linear. This paper is a study on a measuring method for the curved path accurately. A machine vision technique is used to trace the moving path of two-axes stage. To improve the accuracy of machine vision, a zoom lens is used for the 2D micro moving path. The accuracy of this method depends of the CCD resolution and array align accuracy with the zoom lens system. Also, a further study for software algorithm is required to increase the tracing speed. This technique will be useful to trace a small object in the 2D micro path in real-time accurately.

• Journal of applied mathematics & informatics
• /
• v.26 no.3_4
• /
• pp.679-688
• /
• 2008

In multivariate regression analysis there exist many influence measures on the regression estimates. However it seems to be few of influence diagnostics on test statistics in hypothesis testing. Case-deletion approach is fundamental for investigating influence of observations on estimates or statistics. Tang and Fung (1997) derived single case-deletion of the Wilks' ratio, Lawley-Hotelling trace, Pillai's trace for testing a general linear hypothesis of the regression coefficients in multivariate regression. In this paper we derived more extended form of those measures to deal with joint influence among observations. A numerical example is given to illustrate the effect of joint influence on the test statistics.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1567_1567
• /
• 2009

In this article, we deal with the IED(Intelligent Electronic Device) on the EMC aspect. Recognizing how expensive the thorough EMC work will be regarding the entire IED, we focus on the characteristics of RF signals moving along multiple TX-lines in one specified example of the typical IED structure, say, the layer of trace lines. Simplifying the real structure, we run a 3D EM program and analyze the properties of signals on the lines and interference due to the coupling between the neighboring lines.

• ETRI Journal
• /
• v.28 no.4
• /
• pp.537-540
• /
• 2006

When multiple ZigBee wireless personal area networks (WPANs) are in close proximity to each other, contentions and collisions in transmissions will lead to increased packet delays. However, there is no existing study on how delay performance would be affected in a crowded real-life environment where each person walking down a busy street would be wearing a ZigBee WPAN. This letter studies the use of ZigBee WPANs in such a real-life environment for real-time heart beat monitoring. To be pragmatic, we derived a mobility pattern from the analysis of a real-life video trace. Then, we estimated the delay performance from the video trace by combining data collected from ZigBee experiments. The results show that the 300 ms packet delay requirement will not be met for only 11% of the time. When failure occurs, it will last for an average duration of 1.4 s.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.10
• /
• pp.1932-1936
• /
• 2008

A new analytical method using 1-(2-pyridylazo)-2-naphthol modified $SiO_2$ nanoparticles as solid-phase extractant has been developed for the preconcentration of trace amounts of mercury(II) in different water samples. Conditions of the analysis such as preconcentration time, effect of pH, sample volumes, shaking time, elution conditions and effects of interfering ions for the recovery of analyte were investigated. The adsorption capacity of nanometer $SiO_2$-PAN was found to be 260 ${\mu}molg^{-1}$ at optimum pH and the detection limit (3$\sigma$) was 0.48 ${\mu}gL^{-1}$. The extractant showed rapid kinetic sorption. The adsorption equilibrium of mercury(II) on nanometer $SiO_2$-PAN was achieved just in 5 mins. Adsorbed mercury(II) was easily eluted with 5 mL of 6 M hydrochloric acid. The maximum preconcentration factor was 50. The method was applied for the determination of trace amounts of mercury(II) in various water samples and industrial effluents.