• 보존과학연구
• /
• s.20
• /
• pp.91-120
• /
• 1999

This paper presents the results of investigation on crystal, firing temperature and trace elements analysis of fragments 4~8 centriesexcavated from Kyong ju historical sites such as Wang kyong,Walsung, Hwangnam great tomb by application of optical microscope, neutron activation analysis and X-ray diffraction. Temper analysis of clay for identification of local or foreign production; Trace elements is not presented a unique chemical composition. That’s data have to be treated a statistical process in order to normalize. The results followed ;(1) Firing temperature could be estimated $700^{\circ}C$ on some softness pottery at Walsung and most of hardness others are $1,000^{\circ}C$ to $1,200^{\circ}C$.(2) Crystal structures are divided into three kinds of mineralogical composition(Quartz, Mullite, Feldspar).(3) Considering of the results of statistical data, chemical composition of Walsung is more similarly Wang kyong than Hwangnam great tomb.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.28 no.5
• /
• pp.1079-1087
• /
• 2018

Binary scalar multiplication which is the main operation of elliptic curve cryptography is vulnerable to the side-channel analysis. Especially, it is vulnerable to the side-channel analysis which uses power consumption and electromagnetic emission patterns. Thus, various countermeasures have been studied. However, they have focused on eliminating patterns of data dependent branches, statistical characteristic according to intermediate values, or the interrelationships between data. No countermeasure have been taken into account for the secure design of the key bit check phase, although the secret scalar bits are directly loaded during that phase. Therefore, in this paper, we demonstrate that we can extract secret scalar bits with 100% success rate using a single power or a single electromagnetic trace by performing key bit-dependent attack on hardware implementation of binary scalar multiplication algorithm. Experiments are focused on the $Montgomery-L{\acute{o}}pez-Dahab$ ladder algorithm protected by scalar randomization. Our attack does not require sophisticated pre-processing and can defeat existing countermeasures using a single-trace. As a result, we propose a countermeasure and suggest that it should be applied.

• Resources Recycling
• /
• v.26 no.4
• /
• pp.50-55
• /
• 2017

Determination of trace elements in a sample including complicated matrix is very difficult due to the interference by the matrix. Therefore, if the trace elements can be separated from the complex sample matrix and determined, the interference effects can be reduced, and it is very helpful for the overall analysis. In this study, the analytes of trace elements were separated from the sample matrix by co-precipitation with trace elements using indium hydroxide ($In(OH)_3$), then detected by inductively coupled plasma-atomic emission spectrometer (ICP-AES). Above all, the optimal conditions for the co-precipitation of elements with indium hydroxide were experimentally established. At last, salt was analyzed by the developed analytical method. No heavy metals were not found in Shinan Jeungdo salt, but trace amounts of several heavy metals except for cadmium were found in Cheonnam Yongkwang salt.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.5
• /
• pp.879-886
• /
• 2008

This paper addresses the analysis and the design optimization of differential interconnects for Low-Voltage Differential Signaling (LVDS) applications. Thanks to the differential transmission and the low voltage swing, LVDS offers high data rates and improved noise immunity with significantly reduced power consumption in data communications, high-resolution display, and flat panel display. We present an improved model and new equations to reduce impedance mismatch and signal degradation in cascaded interconnects using optimization of interconnect design parameters such as trace width, trace height and trace space in differential flexible printed circuit board (FPCB) transmission lines. We have carried out frequency-domain full-wave electromagnetic simulations, time-domain transient simulations, and S-parameter simulations to evaluate the high-frequency characteristics of the differential FPCB interconnects. The 10% change in trace width produced change of approximately 6% and 5.6% in differential impedance for trace thickness of $17.5{\mu}m$ and $35{\mu}m$, respectively. The change in the trace space showed a little change. We believe that the proposed approach is very helpful to optimize high-speed differential FPCB interconnects for LVDS applications.

• Geophysics and Geophysical Exploration
• /
• v.26 no.4
• /
• pp.185-198
• /
• 2023

In marine seismic surveys, the inevitable occurrence of trace gaps in the near offset resulting from geometrical differences between sources and receivers adversely affects subsequent seismic data processing and imaging. The absence of data in the near-offset region hinders accurate seismic imaging. Therefore, reconstructing the missing near-offset information is crucial for mitigating the influence of seismic multiples, particularly in the case of offshore surveys where the impact of multiple reflections is relatively more pronounced. Conventionally, various interpolation methods based on the Radon transform have been proposed to address the issue of the nearoffset data gap. However, these methods have several limitations, leading to the recent emergence of deep-learning (DL)-based approaches as alternatives. In this study, we conducted an in-depth analysis of two representative DL-based studies to scrutinize the challenges that future studies on near-offset interpolation must address. Furthermore, through field data experiments, we precisely analyze the limitations encountered when applying previous DL-based trace interpolation techniques to near-offset situations. Consequently, we suggest that near-offset data gaps must be approached by extrapolation rather than interpolation.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.3
• /
• pp.790-794
• /
• 2012

Trace metal ions such as $Cd^{2+}$, $Ni^{2+}$, and $Zn^{2+}$ in a highly saline sample were subjected to on-line complexation with 4-(2-thiazolylazo) resorcinol (TAR) dissolved in a background electrolyte (BGE) under transient isotachophoresis (TITP) conditions. A long plug of the saline sample, containing the trace metal ions but devoid of TAR, was injected into a coated capillary filled with a BGE composed of 150 mM 2-(cyclohexylamino) ethanesulfonic acid (CHES) and 110 mM triethylamine (TEA) at pH 9.7. Since the electrophoretic mobility of TAR fell between the mobilities of the anionic leading electrolyte ($Cl^-$ in the sample) and the anionic terminating background electrolyte ($CHES^-$), a highly concentrated zone of TAR from the BGE was formed at the rear of the sample matrix and then the metal cations toward the cathode were swept by isotachophoretically assisted on-line complexation (IAOC) between the metal ions and the isotachophoretically stacked TAR. As a result, anionic metal-TAR complexes were formed efficiently, which satisfy the TITP conditions between $Cl^-$ and $CHES^-$. The enrichment factors of metal ions including $Cd^{2+}$ were up to 780-fold compared to a conventional CZE mode using absorbance detection. The detection limits were 17 nM, 15 nM, and 27 nM for $Ni^{2+}$, $Zn^{2+}$, and $Cd^{2+}$ in a 250 mM NaCl matrix, respectively. Our method was successfully applied to the analysis of urine samples without desalting.

• Korean Journal of Veterinary Research
• /
• v.43 no.3
• /
• pp.393-398
• /
• 2003

Simple and rapid sample preparation method for trace elements in foods of animal origin using ultra high pressure microwave digestion system (UHP/MDS) and inductively coupled plasma atomic emission spectrometer (ICP/AES) were developed. 1. For the digestion of sample using UHP-MDS, 20% nitric acid (v/v) was the most suitable solvent for the determination of trace elements in foods of animal origin. 2. The optimal digestion conditions for UHP-MDS were as follows: final temperature $180^{\circ}C$, final pressure 400 PSI, and magnetic power 900 W in the solid sample. For the liquid sample final temperature $170^{\circ}C$, final pressure 300 PSI and magnetic power 700 W were optimal conditions. 3. As result of interlaboratory test, the average recovery rate of the for solid sample were 88.3~99.1% for As, 82.4~93.3% for Cd, 89.2~101.2% for Hg and 86.5~93.8% for Pb, respectively. In liquid sample, it were 87.0~96.8% for As, 80.9~96.6% for Cd, 87.5~91.2% for Hg and 91.4~95.5% for Pb, respectively. 4. The average coefficient variation rate were 3.3~15.9% for solid sample and 2.9~10.8% for liquid sample.

• Korean Institute of Interior Design Journal
• /
• no.11
• /
• pp.57-63
• /
• 1997

In the early 20'c, scientific thoughts make a change the absolute and separate concept of space-time into relative concept of continual entity; a kind of ideal world. It suggests that the meaning of geometry as absolute truth with which has endowed human beings would changed to a relative meaning of accumulation in intellectual work on 'nature'. This cognitive changes appeared into absolute arts in 20'c like Cubism, Superematism or Constructivism. De Stijl movement which had recepted the relative concepts like Einstein's 'theory of relativity' as a developed thought from Newton-Cartesian cognition on the world. Abstration would be adequate method for expressing the dynamics and interrelationship between forms and for giving values to indivisual elements in a compositiov. This method had appeared Modern architectural form, as a common framework. The expression characteristics of geometrical design in Deconstructive and Experimental architecture were summerized in four features through the results of the analysis. First, the relation of architectural element and intertextuality is expressed in discontinuation of context and refusal of functional building. Second, the concept of trace expresses as connection of place, decomposing of excavation of trace, trace of axis, trace of fragments. Third, anti-gravity expression is there to express of open cubic, to outgrow of rectangular system, to outgrow of volume, to separate of ground connectiov. Fourth, the complex composition of abstracted geometric form is these to abstracted geometry about indefinite shape, to layer through the overlap and collage, to de-meaning and amusement of form through the pursuit of uncertainty, to indeterminate of formal meaning through operation and composition of similar form cause to the diverse of meaning.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.24 no.2
• /
• pp.175-182
• /
• 2006

The efficient management for minimum losses and demage precautions of fragile region against coastal disasters such as seismic waves and seawater overflows is proceeding continually. This study is to analyze inundation trace and extract expected damage areas with historic records of tsunami using Geographic Information System. Creating a digital elevation model of the Mangsang and the Nobong region in the east coast, we marked inundation record of tsunami and forecasted the flood area with a seismic wave height between 3 m and 5 m. The inundation trace layers and the expected damage areas on the cadastral map layer were superimposed individually. Consequently, the range and lot numbers of inundation expected area were calculated and inundation areas of 5 m tsunami were increased by 2.8 times than 3 m tsunami in case of subject regions. Analyzed results are expected to use evacuation work in case of seismic waves and to predict the compensation of the damaged area. And this study is expected to use suitable countermeasure for prevention from natural disasters.

• Korean Journal of Health Education and Promotion
• /
• v.30 no.5
• /
• pp.189-199
• /
• 2013

Objectives: This paper aims to explain principles of gist-based health message design and discuss their implications for health promotion and public health education. Methods: After reviewing Reyna and Brainerd's Fuzzy Trace Theory(FTT), the authors explicate how to transform FTT into a practical guidance of health message design. Our explication is based upon FTT's reasoning that human intuition, rather than analysis, takes a primary role in message recall and comprehension, followed by judgment and decision making. We expect gist-based message design to be appropriate to serve such intuition. Results: Four principles of gist-based message design are offered: (1) provision of qualitative, as well as quantitative, information of gist, (2) inclusion of visual images corresponding to gist, (3) use of effective message formats to emphasize the gist (4) inclusion of relevant reasons and contextutal information. Conclusions: Gist-based message design has theoretical and practical implications for health promotion, specifically in the field of public health education, the press and governmental communication toward the public, and provider-patient communication in medical settings.