• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.31 no.3 s.52
• /
• pp.245-251
• /
• 2005

Safety is one of the key issue in the regulation of cosmetics. Cosmetic Act deals with it in Korea. The guidance for the testing cosmetic ingredients and their safety evaluation are prepared by Korea Food and Drug Administration. Ultraviolet radiation could Induce skin damage, edema, erythema, photoaging, immune dysfunction and skin cancer. Ultraviolet radiation is classified as Group 2A(probably carcinogenic to humans) by International Agenry for Reaserch on Cancer(IARC). The in vitro methodologies for evaluating the toxic potential of ingredients reported in the literature have not yet been sufficiently validated for use in areas other than the study for mutagenicity/genotoxicity, for pre-screening for severe irritancy, for screening of phototoxicity and for evaluating the percutaneous absorption. The 3T3 neutral red uptake photoxicity test (3T3 NRU PT) was accepted as OECD toxicity guideline in 2002. The 3T3 NRU PT is an in vitro method based on a comparison of the cytotoxicitv of a chemical when tested in the presence and in the absence of exposure to a non-cytotoxic dose of UVA/visible light.

• Journal of Korean Medicine for Obesity Research
• /
• v.19 no.2
• /
• pp.106-112
• /
• 2019

Objectives: The aim of this study was to observe the reduction of lipid accumulation by treatment with Akkermansia muciniphila extract on 3T3-L1 adipocytes. Methods: After treating pasteurized Akk. muciniphila strains in HT-29 colorectal cancer cell, the relative expression of interleukin (IL)-8, tumor necrosis factor-α, IL-6, and IL-1β mRNA was analyzed by real time polymerase chain reaction, respectively. 27 strains of Akk. muciniphila which have anti-inflammatory effects were selected. 3T3-L1 pre-adipocytes were treated with Akk. muciniphila for 24 hr and then measured the toxicity using water soluble tetrazolium salt assay. The cells were incubated for 4 days and then differentiated into adipocytes using the medium including adipogenic reagents for 10 days. The Akk. muciniphila was treated when the medium was exchanged for differentiation medium at 4^th day and insulin medium at 6^th day. To observe the lipid accumulation, the cells were stained with Oil red O dye and were measured using a spectrophotometer. Results: In the cytotoxicity test, the cell viability of 3T3-L1 pre-adipocytes was significantly increased compared to the control group which untreated with Akk. muciniphila, and there was no cytotoxicity of Akk. muciniphila at 1×10⁷ CFU/mL. The results on Oil red O staining and absorbance measurements were showed a significant decrease in lipid accumulation in the group which was treated with Akk. muciniphila compared to the control group. Conclusions: In our results, Akk. muciniphila has the inhibitory effect of lipid accumulation in 3T3-L1 adipocytes. This suggests that Akk. muciniphila could be help to improve obesity.

• Korean Journal of Veterinary Research
• /
• v.45 no.2
• /
• pp.303-309
• /
• 2005

Olive flounder (Paralichthys olivaceus) is the major mariculture fish in Korea. The annual aquaculture production of olive flounder in Korea during the period of 2003 was 300,000 ton (2002 Statistics, Ministry of Maritime Affairs & Fisheries, Korea Government). Anesthetics is very necessary in aquaculture to minimize stress and damage during harvesting, grading, transportation, spawning induction and handling to fish. In the present study, isoeugenol as new anesthetic in marine fish, especially olive flounder, was examined to know the efficacy and proper concentration. As a result, olive flounder adult was exhibited sedation at 5 ppm at 10 and $15^{\circ}C$, and 7.5 ppm at $20^{\circ}C$, respectively. Anesthesia was required at least 10, 7.5 and 10 ppm at $10^{\circ}C$, $15^{\circ}C$ and at $20^{\circ}C$, respectively. In case of fry, the effect of sedation was observed from 2.5 ppm at $10^{\circ}C$ and 5 ppm at 15 and $20^{\circ}C$, respectively. Anesthesia was observed from 2.5 ppm at $10^{\circ}C$, 5 ppm at 15 and $20^{\circ}C$, respectively. In acute toxicity test, it was impossible to explore $LD_{50}$ with the concentration of isoeugenol adult at $15^{\circ}C$ used, but over immersion volume of 15 ppm at $15^{\circ}C$ was observed mortality in fry. Based on the present study, isoeugenol was identified as a safe and active anesthetic to olive flounder.

• Journal of Life Science
• /
• v.19 no.11
• /
• pp.1672-1678
• /
• 2009

The purified antifungal substances produced by Bacillus amyloliquefaciens IUB158-03 was positive to ninhydrin but negative to aniline, suggesting that the antifungal substance could be a peptide. FAB-MS, UV adsorption spectrum, and amino acid composition analysis revealed that the molecular weight of the antifungal substance was 1042 and that maximal adsorption was at 220 nm and 277 nm. The antifungal substance was composed of $Asn_3$, $Gln_2$, $Ser_1$, $Gly_1$, and $Tyr_1$. The composition and structural characteristics of antifungal substance were analysed by $^1H$-NMR spectrum, $^1H$-COSY, HMQC, which revealed that the compound belongs to the iturin A family. Temperature and pH had little effect on the stability of the antifungal substance in the ranges of $-70{\sim}121^{\circ}C$ and pH 6.0~10.0, respectively. It showed strong antibiotic activity against fungi. An in vitro cytotoxicity test using NIH3T3 cell showed that the antifungal substance does not have cytotoxicity. The number of circulating leukocytes and the hematobiological analysis of the mice administered with the antifungal substances was similar to those of the control group, indicating no cytotoxicity in vivo. Therefore, the antifungal substances extracted from culture broth of Bacillus amyloliquefaciens IUB158-03 have future potential as biocontrol agents against plant diseases caused by fungi.

• Fire Science and Engineering
• /
• v.33 no.4
• /
• pp.16-27
• /
• 2019

A burning test was conducted on the smoke and combustion gases generated from cypress wood treated with sodium silicate, 3-aminopropyltrimethoxysilane sol, 3-(2-aminoethylamino)propylmethyldimethoxysilane sol, and 3-(2-aminoethylamino) propyltrimethoxysilane sol. The silicone compound sol was applied to each of the cypress wood specimens three times with a brush. The smoke and combustion generation gas were analyzed using a cone calorimeter (ISO 5660-1) and the smoke was also evaluated by applying new smoke risk assessment method. The smoke performance index (SPI) of the cypress treated with silicone compound increased 1.66 to 8.42 times and the smoke growth index (SGI) was 11.8 to 88.2%, respectively. The smoke intensity (SI) is expected to be 1.0~50.5% lower than that of the base specimens, resulting in lower smoke and fire hazards. The third maximum carbon monoxide (CO_peak) concentration of the specimens treated with silicone compounds was 22.5~33.3% lower than that of the base specimens. On the other hand, it produced potentially fatal toxicity that was 1.48~1.72 times higher than the US Occupational Safety and Health Administration (OSHA) acceptance standard (PEL). Cypress wood itself produced a high carbon monoxide concentration, but the silicon compound played a role in reducing this level.

• Journal of Ginseng Research
• /
• v.23 no.3 s.55
• /
• pp.182-189
• /
• 1999

For the determination of anti oxidative effects of Korean red ginseng extracts, 100 mg/kg body weight of paraquat(1,1-dimethyl-4,4-bipyrimidinium dichloride) was injected to peritoneal cavity of 6 weeks 23-27 g of ICR mail mice which were pretreated with 200 mg/kg body weight of korean red ginseng extracts(total saponin, water extracts, alcohol extracts, lipophilic extracts) and ascorbic acid for 5 days. Most of mice died of paraquat toxicity within 4 days except only $30\%$ of ascorbic acid group. The hepatic total-SOD activity in liver was highest in ascorbic acid group and lipophilic ginseng extracts group next (p<0.0l). The level of hepatic hydroperoxide was lowest in the order of in alcohol extracts group, lipophilic extracts group and ascorbic acid group (p<0.0l). The highest catalase activity was induced by ascorbic acid followed by water extracts and lipophillic extracts (p<0.01). Finally, the lipid peroxidation level (malondialdehyde:MDA) was the lowest in water extracts group and ascorbic acid next (p<0.01). The highest MDA level was appeared in praquat group and next total saponin group next. In conclusion, the order of effectiveness of antioxidants was found to be ginseng water extracts> ascorbic acid> lipophillic extracts> other ginseng extracts. It was also found that any predominant antioxidant was not effective evenly to all of antioxidant test.

• Journal of the Microelectronics and Packaging Society
• /
• v.8 no.3
• /
• pp.37-42
• /
• 2001

The concerns of the toxicity and health hazard of lead in solders have demanded the research to find suitable lead-free solder alloys. It was discussed that effect of the intermetallic formation and structure on the reliability of solder joints. In this study, lead-free solder alloys with compositions of Sn/3.5Ag/0.75Cu, Sn/2.0Ag/0.5Cu/2.0Bi were applied to the 48 $\mu$BGA packages. Also, the lead-free solder alloys compared with eutectic Sn/37Pb solder using shear test under various aging temperature. Common $\mu$BGA with solder components was aged at $130^{\circ}C$, $150^{\circ}C$ and $170^{\circ}C$. And the each temperature applied to 300, 600 and 900 hours. The thickness of the intermetallics was measured for each condition and the activation energy for their growth was computed. The fracture surfaces were analyzed using SEM (Scanning Electron Microscope) with EDS (Energy Dispersive Spectroscopy). These results for reliability of lead-free interconnections are discussed.

• Korean journal of applied entomology
• /
• v.39 no.1
• /
• pp.53-58
• /
• 2000

The effect of NeemAzal-T/S was tested by leaf disk method on fecundity, egg mortality, and preference of twospotted spider mite, Tetranychus urticae and its predator mite, Amblyseius womersleyi in the laboratory. Mortalities of T. urticae and A. womersleyi adults were 97.7% and 20.0%, in 100ppm treatment at 72 h after application, respectively. The mean number of eggs laid per T. urticae female adult were 0.0 and 18.5, and those of A. womersleyi were 1.6 and 2.9 at 100 ppm and 0 ppm concentrations, respectively. Hatchability of T. urticae eggs treated with 50 and 100 ppm were 52.8%, and 2.5%, respectively, and those of A. womersleyi eggs were 100% and 91.3%, respectively. Choice and no-choice tests revealed that T. urticae female preferred to alight and oviposit on untreated bean leaf disk with 13.8 to 18.2 eggs per female. In contrast, A. womersleyi female preferred on treated or untreated bean leaf equally. There was no significant differences in the number of consumption of T. urticae eggs by A. womersleyi on treated and untreated bean leaves, except 200 ppm. These results indicate that NeemAzal-TIS is highly toxic to T. urticae, and is less toxic to A. womersleyi. It may be concluded with these results that NeemAzal-T/S could be incorporated into integrated T. urticae management system.

• Journal of the Korea Concrete Institute
• /
• v.23 no.3
• /
• pp.311-320
• /
• 2011

Fly ash (FA), byproduct from power plant has been actively used as mineral admixture for concrete. However, since bottom ash (BA) is usually used for land reclaim or subbase material, more active reuse plan is needed. Pond ash (PA) obtained from reclaimed land is mixed with both FA and BA. In this study, 6 PA from different domestic power plant are prepared and 5 different replacement ratios (10%, 20%, 30%, 50%, and 70%) for fine aggregate substitutes are considered to evaluate engineering properties of PA as fine aggregate and durability performance of PA concrete. Tests for fine aggregate of PA for fineness modulus, density and absorption, soundness, chloride and toxicity content, and alkali aggregate reaction are performed. For PA concrete, durability tests for compressive strength, drying shrinkage, chloride penetration/diffusion, accelerated carbonation, and freezing/thawing are performed. Also, basic tests for fresh concrete like slump and air content are performed. Although PA has lower density and higher absorption, its potential as a replacement material for fine aggregate is promising. PA concrete shows a reasonable durability performance with higher strength with higher replacement ratio. Finally, best PA among 6 samples is selected through quantitative classification, and limitation of PA concrete application is understood based on the test results. Various tests for engineering properties of PA and PA concrete are discussed in this paper to evaluate its application to concrete structure.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.769-772
• /
• 2008

The problem of disposing construction waste materials has become a national and social problem. Recycled powder generated in the process of making aggregate, and the recycled powder is land-filled in its entirety. Results of toxicity testing of recycled power show that it contains base-pair substituent mutagenicity. As recycled powder is disposed of as landfill, it can cause secondary contamination such as soil and underground water contamination. There has been very little research made on recycled powder. This study has examined the utilization of concrete mixture by using recycled powder in a mixture instead of cement and compared and analyzed the characteristics of dynamics and workability. This study has examined the application of recycled powder in concrete. Depending on the replacement rate and workability, test piece was manufactured using different mixing rate by CP, WCP, PCP. The CP was used to examine the physical property of concrete and characteristics its dynamics. The letters W of WCP and P of PCP are the initials of water and mixture. They were made using the standard mixing ratiosemphasizing the workability to determine the characteristic of dynamics of concrete based on the mixing ratio of recycled powder. With the increase in the replacement rate, CP had very little change in the strength. But with the decline of slump, the workability was not good. The result of manufacturing WCP and PCP using the standard mixing ratio showed that WCP had a drop in strength compared to the plain. PCP had almost the same value as the plain only when the replacement rate was 10%. When it was higher than that, a reduction in strength was observed.