• Journal of Korean Society for Atmospheric Environment
• /
• v.15 no.2
• /
• pp.151-158
• /
• 1999

Offsite consequences resulting form worst-case scenarios involving release of toxic substances in the Yochon area were estimated using the ALOHA(Areal Locations of Hazardous Atmospheres) model. Eight toxic substances, including NH3, were considered; five were toxic gases and three were toxic liquids at ambient temperature. For toxic gases, the entire quantity was assumed to be released at a constant rate during a 10-minute period. For toxic liquids, the entire quantity stored in the tank was assumed to be spilled and spread and spread instantaneously to form a pool with a depth of 1cm, and then evaporated over some period of time. Except for phosgene and toluene 2,4-diisocyanate, for which concentration levels corresponding to human health effects are very low, average distances of the area at risk of adverse health effects for a 1- tom release were predicted to be $2.3{\pm}1.1 km$ for the worst-case meteorological conditions and $0.93{\pm}0.69km$ under typical meteorological conditions of the Yochon are. Because a large number of people were predicted to be affected in the current analysis, refined analyses considering both realistic accident scenarios and topographic effects were warranted.

• Journal of the Korean Institute of Gas
• /
• v.9 no.2 s.27
• /
• pp.43-49
• /
• 2005

Today toxic gas has various uses. If there is a release accident, the gas rapidly disperse into the atmosphere. The extent of damage due to toxic gas accident is very wide and fatal to human being. So, it is necessary for toxic gas facilities which have high risk to construct an emergency response system that prepare to toxic release and make immediate response to be possible at accident appearance. In this study accident scenario were selected and frequency analysis was executed using FTA technique. Dispersion effect of toxic gas release was analyzed using DNV company's PHAST(Ver. 6.2). Finally, an emergency response system was developed using results of quantitative risk analysis.

• Journal of the Korean Institute of Gas
• /
• v.8 no.2 s.23
• /
• pp.8-14
• /
• 2004

This study analyzed dispersion characteristics and toxic effect in the small-scale continuous release of chlorine gas. We found that the Gaussian model using the Briggs' dispersion coefficient and the effective release height was better predicting experiments than the BM model. From chlorine concentrations calculated by Gaussian model, simulation results showed that the dispersion of chlorine was more affected by atmospheric stability and wind speed than release rate and that the toxic effect of chlorine gas was similar to the effect of parameters on chlorine dispersion. From effected areas with toxic criteria, damaged areas could be estimated to protect human.

• Korean Journal of Hazardous Materials
• /
• v.3 no.1
• /
• pp.59-64
• /
• 2015

Semiconductor industry has large number of chemical inventory and is easily exposed to chemical release incidents. Toxic release is one of the most interested area in evaluating consequence to the vicinity of industry facilities handling hazardous materials. Hydrofluoric acid is one of the typical chemical used in semiconductor facility and is selected and toxic release is evaluated to assess the risk impacted to its off-site. Accident scenarios were listed using process safety information. The scenarios having effect to the off-site were selected and assessed further according to guideline provided by Korea government. Worst case and alternative scenarios including other interested scenarios were evaluated using ALOHA. Each evaluated scenario was assessed further considering countermeasures. The results showed that the facility handling hydroflooric acid is safe enough and needed no further protections at the moment.

• Journal of the Korean Society of Safety
• /
• v.9 no.1
• /
• pp.89-94
• /
• 1994

Two methods, the numerical method of CPQRA and the manual method of IAEA, were used to estimate the effect distance from release and dispersion of toxic materials. The Gaussian plume model which has a weather stability class D with wind velocity of 5m/s was applied to calculate dispersion of toxic materials. Also, probit function were employed to evaluate the human fatality as a result of exposure to toxic gases. Furthermore, concentration of toxic materials corresponding to LC$_{50}$ for 30 min could be determined by setting Pr as 5.0 and solving the probit function. Calculations were conducted by employing chlorine and ammonia as toxic materials because they are not only most commonly used In chemical plants but also very harmful to humans. Calculated results by employing toxic materials indicated that the effect distance from the CPQRA method was between the minimum and maximum distance from the method proposed by IAEA.A.

• Journal of the Korean Institute of Gas
• /
• v.21 no.3
• /
• pp.9-16
• /
• 2017

Toxic release is one of the most interested area in evaluating consequence to the vicinity of industry facilities handling hazardous materials. Chloric acid production facility is selected and toxic release is evaluated to assess the risk impacted to its off-site. Accident scenarios were listed using process safety information. The scenarios having effect to the off-site were selected and assessed further according to guideline provided by Korea government. Worst case and alternative scenarios including other interested scenarios were evaluated using ALOHA. Each evaluated scenario was assessed further considering countermeasures. The results showed that the facility handling chloric acid is safe enough and needed no further protections at the moment.

• Journal of the Korean Institute of Gas
• /
• v.8 no.4 s.25
• /
• pp.8-14
• /
• 2004

Accidental releases of toxic gases heavily affect to the risk of process facilities. In this research, consequence analysis for accidental releases of ammonia and chlorine gases was studied using the risk based inspection, based on API-581 BRD. It was found out that consequence areas (toxic areas) decrease as temperature increases and as the pipe diameter and pressure decrease. For the same release condition, the toxic area by the release of chlorine gas was larger than that by the release of ammonia gas.

• Journal of the Korean Institute of Gas
• /
• v.18 no.4
• /
• pp.76-85
• /
• 2014

To establish the necessary safety technology in high-pressure toxic gas facilities, especially for the corrosion, which is the main causes of toxic gas accident, this study adopts and investigates the API-581 procedures developed by the American Petroleum Institute (API). And the applicability of the 8-step analytical procedures of consequence analysis in API-581 is discussed, and a method for consequence analysis in high-pressure toxic gas facilities is suggested. Based on the discussion and results, the analytical procedure is simplified as the 6 steps in total for the effective application to high-pressure toxic gas facilities: Step 1 (determination of representative material), Step 5 (determination of release type), Step 6 (determination of phase of fluid), and Step 8 (estimation of damage range) are not applied: Step 3 (estimation of total amount of release) is applied only for the inventory group concept; Step 4 (estimation of release rate) only for the gas release rate; and all of Step 2 (selection of release hole size) and Step 7 (evaluation of post-release response) are applied. In the proposed method, the generally applicable method of CCPS is adopted as alternative method for Steps 5 and 8.

• Journal of Environmental Science International
• /
• v.6 no.2
• /
• pp.189-194
• /
• 1997

Toxic peptides from hornet venom, mastoparan and mastoparan-B were synthesized us- ing the solid phase peptide synthesis method and investigated the interaction of them with phospholipid bilayer, antibacterial activity, and hemolytic activity. Both toxic peptides could induce dye release at a low concentration in neutral liposome. The binding affinity of mastoparan-B for neutral liposome was smaller than that for acidic one. Mastoparan and mastoparan-B had strong antibacterial activity for gram-positive bacteria, but weak or potent activity for gram-negative ones, respectively. Mastoparan and mastoparan-B lysed erythrocyte very little up to 5 $\mu$M.

• The Korean Journal of Pharmacology
• /
• v.17 no.2
• /
• pp.31-36
• /
• 1981

Heavy metals which are present as trace elements in human body have been known to modify various enzymatic reaction. These metals can be essential or non-essential. Zinc, copper and calcium are essential in maintaining some biological processes, whereas non-essential metals such as cadmium, lead and mercury produce accumulatve toxic effect. Cadmium accumulated in pancreas can cause toxicity and damage of pancreatic cells, thereby influencing CHO metabolism. Lead compounds are known to produce toxic effects on the kidney, digestive system and brain fellowed by inhibition of activity of ${\rho}-aminolevulinic$ acid and biosynthesis of hemoproteins and cytochrome. Evidence has been accumulated that zinc not only acts as a cofactor in enzyme reaction but also prevents toxic effect induced by heavy metal such as copper and cadmium. To demonstrate the effect of heavy metals on pancreatic secretion, part of uncinate pancreas was taken and incubated in Krebs-Ringer bicarbonate buffer with heavy metals used. Additional treatment with CCK-OP was performed when needed. After incubation during different period of time, medium was analyzed for amylase activity using Bernfeld's method. The present study was attempted in order to elucidate the effect of several kinds of heavy metal on exocrine pancreatic secretion in vitro. The results obtained are as follows: 1) CCK-OP stimulated significantly amylase release from pancreatic fragments in vitro. 2) CCK-OP response of amylase release from pancreatic fragments was inhibited by treatmant with cadmium, especially high doses of cadmium. 3) CCK-OP response of amylase release from pancreatic fragments was inhibited when pretreated with $10^{-4}M$ copper chloride. 4) Lead chloride at the concentration of $10^{-3}M\;and\;10^{4}M$ stimulated the basal amylase release in vitro but CCK-OP response did not augment by lead chloride. 5) Zine chloride did not affect amylase release from pancreatic fragment in vitro. From the results mentioned above, it is suggested that CCK-OP response was inhibited it the amylase release from pancreatic fragments pretreated with cadmium and copper chloride.