• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.244.1-244.1
• /
• 2014

디스플레이 패널의 터치 스크린에 가장 널리 사용되는 ITO 전극은 사용자의 눈에 전극 면이 시각적으로 구분되지 않도록 해야 한다. 따라서 최근에는 ITO 전극 면이 구분되지 않도록 하기 위해 다층 박막으로 이루어진 인덱스 매칭(index matching, IM) 기술을 이용하여 ITO 전극 필름을 제작하고 있다. 이러한 인덱스 매칭된 ITO 필름은 기판이나 공정 조건, 인덱스 매칭 층의 물질 종류에 따라 ITO 박막의 전기적 광학적 특성이 각각 다르게 나타나기 때문에 이에 대한 많은 연구가 이루어지고 있다. 본 연구에서는 롤투롤 스퍼터링(roll to roll sputtering) 방법으로 고굴절과 저굴절이 순차적으로 코팅 처리된 PET 기판 위에 ITO 박막을 증착하여 IM-ITO 필름을 제작하고 전기적 광학적 특성을 관찰하였다. 이를 위해 습식(wet) 코팅 방법으로 저굴절층과 고굴절층을 PET 필름 위에 코팅하여 IM층을 제작한 PET 필름 위에 ITO 박막을 증착하고, $150^{\circ}C$로 후 열처리를 하여 인덱스 매칭된 ITO 필름을 제작하였다. 제작된 필름은 GIXD를 이용하여 박막의 구조와 결정성을 조사하였고, 면저항 측정기와 홀측정 장치를 이용하여 전기적 특성을 관찰하였다. 그리고 분광광도계와 탁도(haze) 측정기를 이용하여 광학적 특성을 조사하였다. 본 연구를 통해 롤투롤 스퍼터링 방법으로 유무기 복합막으로 구성된 IM-ITO 박막의 전기적 광학적 구조적 특성에 대해 보고하고자 한다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.19.1-19.1
• /
• 2010

The process of manufacturing printed electronics using printing technology is attracting attention because its process cost is lower than that of the conventional semiconductor process. This technology, which offers both a lower cost and higher productivity, can be applied in the production of organic TFT (thin film transistor), solar cell, RFID(radio frequency identification) tag, printed battery, E-paper, touch screen panel, black matrix for LCD(liquid crystal display), flexible display, and so forth. In general, in order to implement printed electronics, narrow width and gap printing, registration of multi-layer printing by several printing units, and printing accuracy of under $20\;{\mu}m$ are all required. These electronic products require high precision to the degree of tens of microns - in a large area with flexible material, and mass productivity at low cost. As such, the roll-to-roll printing process is attracting attention as a mass production system for these printed electronic devices. For the commercialization of this process, two basic electronic ink technologies, such as conductive ink and polymers, and printing equipment have to be developed. Therefore, this paper addressed basis design and test to develop fine patterning equipment employing the roll-to-roll printing equipment and electronic ink.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.3
• /
• pp.241-246
• /
• 2004

We have designed LED display system using ARM7TDMI processor and implemented hangul input and output. This system is easily extensible because controller board and LED matrix board were designed one module. Possible Input Methods of LED display system are PC, PDA and remote controller's wired and wireless communication. We have ported QT/Embedded 2.3.7 with touch panel Input at embedded board of Linux OS 2.4.18 and PXA255 Processor based. QT Application which we coded is able to input displaying text using ethernet communication on embedded system. Many of indicating text data is able to be saved because only korean alphabet codes are stored for data which users want displaying.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.255-256
• /
• 2009

The anti suck back centering (ASBC) for preventing backflow of oil for oil rotary pump was designed in the power failure. To evaluate the evacuation characteristics, we manufactured the mini vacuum system, personal computer, AD converter (National instrument, NI-6009), and automatic controller with touch panel for a basis. In this study, we measured the evacuation characteristics of ABSC and analyzed the flow field of viscous flow regime using a commercial software, CFD-ACE+. Also, the leakage of the advaced ASBC for leveling was measured.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.10
• /
• pp.1153-1158
• /
• 2011

Roll-to-roll process is an emerging mass production method for printed and flexible electronics such as touch screen panel, RFID tag, thin film solar cell, and flexible display due to its high throughput. High precision in printing and coating is required to apply functional materials onto substrate. For such reason, every part of the roll-to-roll equipment needs to be precisely fabricated and to retain its precision under regular operation. In this article, the precision of cantilever type idler roller and a novel method to mitigate its deflection under web tension loading are discussed and the method is verified using both the numerical and the experimental works. The proposed method improves the structural rigidity of cantilever type roller whose advantages, such as low capital cost and high web path configurability, are maintained.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.257-257
• /
• 2011

현재의 평판 디스플레이를 대체할 차세대 정보전달 매체로서 플랙서블 디스플레이가 부각되고 있다. 이러한 플렉서블 디스플레이의 발전과 함께 터치스크린 패널 또한 같은 방향으로 연구 개발이 필요하다. 플렉서블 터치 스크린 패널의 연구에서 가장 큰 문제는 ITO의 휨에 따른 깨짐 현상으로 인한 전기적 특성의 저하이다. 이 논문에서는 현재 터치 스크린 패널로 사용되는 ITO/PET 샘플과 ITO/PET 를 패터닝한 그 위에 PEDOT을 증착한 구조를 전기적, 기계적, 광학적 특성을 비교하였다. 실험진행은 샘플의 면저항 및 투과도, hall measurement 측정을 진행하였고, 추가적으로 샘플의 Bending test를 통해 bending 횟수에 따른 박막의 특성을 분석하였다. 측정 결과, ITO/PET 와 PEDOT/patterned ITO/PET 샘플의 면저항은 400${\Omega}/{\Box}$, 424${\Omega}/{\Box}$로 큰 변화가 없었으며, hall 측정결과 중에서 carrier concentration은 2.8${\times}$1,020/cm-3, 4.492${\times}$1,021/cm-3로 증가 하였다. 투과도를 측정한 결과 97.6%, 96% 정도로 큰 변화는 없었다. 하지만, bending 횟수에 따른 면저항 특성의 변화 측정 결과 PEDOT/patterned ITO/PET 샘플의 면저항 변화가 기존의 ITO/PET 샘플의 면저항 변화와 비교하여 거의 변화가 없어, 기계적 특성에서 우수한 특성을 확인 할 수 있었다.

• Journal of the Korean institute of surface engineering
• /
• v.40 no.3
• /
• pp.144-148
• /
• 2007

To prepare the transparent electrode for electronic devices such as flat panel or flexible displays, solar cells, and touch panels; tin doped $In_2O_3$ (ITO) films with low resistivity and a high transparency were fabricated using a facing target sputtering (FTS) system at the various oxygen gas flow rate. The carrier concentration and mobility of ITO films were measured by Hall Effect measurement. And the transmittance was measured using the UV-VIS spectrometer. As a result, we can obtain the ITO thin films prepared at 10% oxygen gas flow ratio, thickness 150 nm with transmittance 85% and resistivity $8.1{\times}10^{-4}{\Omega}cm$ and surface roughness 5.01 nm.

• Journal of Information Display
• /
• v.2 no.1
• /
• pp.38-42
• /
• 2001

Thin films of $In_2O_3-SnO_2$(ITO), $SnO_2$, and $SiO_2$ were prepared on the PET substrate by DC magnetron roll sputtering. 135 nm thick ITO film on $SiO_2$/PET substrate has sheet resistance as low as 55 ${\Omega}/square$ and transmittance as high as 85%. $H_2O$gas permeation through the film was 0.35 g/$m^2$ in a day. These properties are enough on optical film for the plastic LCD substrate or touch panel. Both refractive index and sheet resistance of ITO was found to be very sensitive to $O_2$ flow rate. Oxygen flow conditions have been optimized from 4 to 5 SCCM at $10^{-3}$torr. It is also shown that both thickness of $SnO_2$ and refractive index of $SiO_2$ decrease as $O_2$ flow rate increases.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.15.2-15.2
• /
• 2009

Manufacturing of printed electronics using printing technology has begun to get into the hot issue in many ways due to the low cost effectiveness to existing semi-conductor process. This technology with both low cost and high productivity, can be applied in the production of organic thin film transistor (OTFT), solar cell, radio frequency identification (RFID) tag, printed battery, E-paper, touch screen panel, black matrix for liquid crystal display (LCD), flexible display, and so forth. The emerging technology to manufacture the products in mass production is roll-to-roll printing technology which is a manufacturing method by printings of multi-layered patterns composed of semi-conductive, dielectric and conductive layers. In contrary to the conventional printing machines in which printing precision is about $50~100{\mu}m$, the printing machines for printed electronics should have a precision under $30{\mu}m$. In general, in order to implement printed electronics, narrow width and gap printing, register of multi-layer printing by several printing units, and printing accuracy of under $30{\mu}m$ are all required. We developed the roll-to-roll printing equipment used for printed electronics, which is composed of un-winder, re-winder, tension measurement system, feeding units, dancer systems, guide unit, printing unit, vision system, dryer units, and various auxiliary devices. The equipment is designed based on cantilever type in which all rollers except printing ones have cantilever types, which could give more accurate machine precision as well as convenience for changing rollers and observing the process.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.10
• /
• pp.837-843
• /
• 2009

$TiO_2$(2 wt.%)-doped ZnO(TZO) films with thickness from 100 nm to 500 nm were prepared on polyethylene naphthalate(PEN) substrate under various rf-power range from 40 W to 80 W. Their electrical and optical properties were investigated as a function of rf-power. We think that these properties were closely related with the crystallization and the film density of TZO films. It was also presumed that the vaporization of the water vapor and other adsorbed particles such as an organic solvents can affect the electrical properties of the conventional transparent conductive oxide(TCO) films. On the other hand, since the TZO film deposited on glass substrate at room temperature with rf-power of 80 W shows a very low resistivity of $7.5\times10^{-4}\;\Omega{\cdot}cm$ and a very excellent transmittance over an average 85% in the visible range, that is comparable to that of ITO films. Therefore, we expect that the TZO films can be used as transparent electrode for optoelectronic devices such as touch-panels, flat-panel displays, and thin-film solar cells.