• 공업화학
• /
• 제29권3호
• /
• pp.325-329
• /
• 2018

본 연구에서는 항산화성분함량이 높다고 알려진 안젤리카를 이용하여 폴리페놀을 추출하고 반응표면분석법을 이용하여 추출과정을 최적화하였다. 반응표면분석법의 반응치로는 추출수율과 폴리페놀함량을 설정하였고, 추출공정의 계량인자로는 추출시간, 주정/초순수 부피비, 추출온도를 이용하였다. 추출수율과 폴리페놀함량 모두 계량인자의 주효과도와 교호효과도를 모두 고려하였을 때 가장 큰 영향을 미치는 인자는 추출시간이었다. 또한 반응표면분석 결과 안젤리카의 최적추출조건은 추출시간이 2.8 h, 주정/초순수 부피비 64.0 vol%, 추출온도 $56.6^{\circ}C$로 나타났다. 이 조건의 추출수율은 24.6%, 폴리페놀함량은 8.76 mg GAE/g으로 산출되었다. 추출수율과 폴리페놀함량에 대한 회귀방정식의 결정계수 $R^2$은 각각 81.4%와 75.4%이었으며, 종합 만족도는 D = 0.80, 유의성은 5% 이내의 수준에서 인정되었다.

• 한국전기전자재료학회논문지
• /
• 제17권7호
• /
• pp.754-759
• /
• 2004

We have studied the fringe field switching (FFS) mode with the positive dielectric anisotropy for the fast response time. The factors such as the physical properties of the LC, the cell gap, and the rubbing angle were critical for the fast response time of the FFS mode. The response time became 10 ms faster when the rotational viscosity of the new LC is 20 mPa.s lower than the conventional LC. When the cell gap changed from 3.6 ${\mu}{\textrm}{m}$ to 3.0 ${\mu}{\textrm}{m}$, it was possible to achieve the total response time and response times associated with grey-to-grey transitions under 16 ms. And the response times including grey-to-grey transitions become fast as the rubbing angle decreases.

• Industrial Engineering and Management Systems
• /
• 제13권3호
• /
• pp.297-303
• /
• 2014

Stock pre-positioning is one of the most important decisions for preparing the stage of emergency logistics planning. In this paper, a mixed integer model for stock pre-positioning is derived to support an emergency disaster relief response against the event of earthquake. A maximum response time limit, budget availability, multiple item types, and capacity restrictions are considered. In the model, the decision of the distribution centers to cover a disaster area and the amount of supplies to be stocked in each distribution center are simultaneously determined to maximize the total expected relief demand of the disaster areas covered by the existing distribution centers. The proposed model is applied to a real case with 33 disaster areas and 16 distribution centers in Indonesia. Several sensitivity analyses are conducted to estimate the fluctuation on the emergency stock pre-positioning planning by changing the maximum response time and budgets.

• KEPCO Journal on Electric Power and Energy
• /
• 제1권1호
• /
• pp.79-84
• /
• 2015

Transformer is widely used element on power system and industrial area. Especially the transformers installed at power system are exposed to an environment of arbitrary changed. Thus the prediction of degradation and the analysis of response to impulse are important. To conduct those works, the electrical characteristics of system should be analyzed, effectively. But the analysis of electrical characteristic in electric machine level such as pole and pad-mounted transformer is almost no, thus commercial VNA (Vector Network Analyzer) is used to getting the response in wide frequency range. However, the output power of VNA is usually under 10mW, so verification for effectiveness of measuring electrically large component should be conducted, firstly. Next, after getting total S-parameter of transformer, predicting impulse response can be performed in time-domain with circuit simulator. In this paper, it is introduced that verification effectiveness of VNA using transfer function from SFRA (Sweep Frequency Response Analyzer), firstly. Next, total S-parameter, six by six matix form, was built using measured 2 port S-parameter from vector network analyzer. To get the response to impulse which is defined by IEC 60060-1, time-domain simulation is conducted to ADS (Advenced Design System) circuit simulator.

• Radiation Oncology Journal
• /
• 제36권2호
• /
• pp.153-162
• /
• 2018

Purpose: We aimed to evaluate clinical outcomes including progression-free survival (PFS), overall survival (OS), partial response, and complete response in patients who underwent radiation therapy (RT) for mycosis fungoides (MF). Also, we sought to find prognostic factors for clinical outcomes. Materials and Methods: Total 19 patients confirmed with MF between 1999-2015 were retrospectively reviewed. Clinical and treatment characteristics, clinical outcomes, and and toxicities were analyzed. Results: Eleven patients were treated with total skin electron beam radiotherapy (TSEBT) and 8 patients with involved field radiation therapy (IFRT) with median dose of 30 Gy, respectively. The median time interval from diagnosis to RT was 2.6 months (range, 0.4 to 87.3 months). The overall response rate was 100%; 11 patients (57.9%) had a complete response and 8 patients (42.1%) a partial response. The presence of positive lymph node at the time of consultation of RT was associated with lower OS (p = 0.043). In multivariate analysis, PFS was significantly lower for patients with increased previous therapies experienced following RT (p = 0.019) and for patients showing PR during RT (p = 0.044). There were no reported grade 3 or more skin toxicities related with RT. Conclusion: Both IFRT and TSEBT are effective treatment for MF patients. Patients with short disease course before RT or complete response during RT are expected to have longer PFS. Positive lymph node status at the initiation of RT was associated woth poor OS, suggesting other treatment modalities such as low-dose RT for patients with low life-expectancy.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2005년도 학술발표회 논문집
• /
• pp.487-494
• /
• 2005

In this study, a set of artificial earthquake time histories, which can be used for the earthquake-resistant design of seismically isolated highway bridges, was presented. In addition, adequateness of the generated ground accelerations was investigated. These were performed based on the seismic design standard for seismically isolated bridges. Total of 22 acceleration time histories were generated for each soil condition by the spectral method. The time histories were verified to meet the code provisions including (1) mean response spectrum at control frequencies, (2) EPGA (effective peak ground acceleration), and (3) correlation coefficient. Finally, the maximum response corresponding to four time histories and the mean response associated with seven time histories were computed using the generated acceleration time histories, which shows validity of the proposed artificial earthquake time histories.

• 산업경영시스템학회지
• /
• 제43권3호
• /
• pp.68-76
• /
• 2020

In a series of recent launch tests, North Korea has been improving the firepower of its missiles that can target South Korea. North Korea's missiles and submarines are capable of threatening targets in South Korea and are likely faster and more covert than the systems previously seen in North Korea. The advanced threats require that ROK Navy should not only detect them earlier than ever but also response quicker than ever. In addition to increasing threats, the number of young man that can be enlisted for military service has been dramatically decreasing. To deal with these difficulty, ROK navy has been making various efforts to acquire a SMART warship having enhanced defense capability with fewer human resources. For quick response time with fewer operators, ROK Navy should improve the efficiency of systems and control tower mounted on the ship by promoting the Ship System Integration. Total Ship Computing Environment (TSCE) is a method of providing single computing environment for all ship systems. Though several years have passed since the first proposal of TSCE, limited information has been provided and domestic research on the TSCE is still in its infancy. In this paper, we apply TSCE with open architecture (OA) to solve the problems that ROK Navy is facing in order to meet the requirements for the SMART ship. We first review the level of Ship System Integration of both domestic and foreign ships. Then, based on analyses of integration demands for SMART warship, we apply real time OA to design architecture for TSCE from functional view and physical view. Simulation result shows that the proposed architecture has faster response time than the response time of the existing architecture and satisfies its design requirements.

• Journal of Biosystems Engineering
• /
• 제21권2호
• /
• pp.155-166
• /
• 1996

A direct injection sprayer was designed using the concepts of injection mixing and total flow control, flowrate-based system compensating for the variation of forwarding speed. A metered rate, proportionally to the actual diluent flow rate, of a tracer chemical was injected directly into the diluent stream. The injection of chemical may improve the precision and safety of chemical application process. The control system was evaluated for the variables of the control interval, tolerances and sensitivities of flow regulation valve and injection pump. Performance of the system was assessed as that the response time of flow rate, response time of injection rate, absolute steady state error, and the coefficient of variance(C.V.) of concentration were 8.5 and -0.53 seconds, 0.067 lpm(0.8%) and 3.15%, respectively, at optimal parameters of control interval of 1.0 sec, fast sensitivity of flow regulation valve, medium sensitivity of injection pump and medium tolerance of flow rate. Performance of the system can be improved by increasing the sensitivity of flow regulating valve and employing a high resolution velocimeter, such as Doppler radar.

• 공업화학
• /
• 제28권4호
• /
• pp.442-447
• /
• 2017

본 연구에서는 항산화성분을 다량 함유하고 있는 천연물로부터 유효성분을 추출하고, 이를 반응표면분석법을 이용하여 추출공정을 최적화하였다. 또한 감잎과 엉겅퀴로부터 추출된 유효성분의 플라보노이드 함량과 폴리페놀 함량을 측정함으로써 유효성분의 기능성을 평가하였다. 추출공정의 독립변수로는 추출시간, 추출온도, 용매의 비율을 설정하였고, 반응치는 수율, 폴리페놀 함량, 플라보노이드 함량을 확인하였다. 감잎의 경우 추출시간(3.1 h), 주정/초순수 부피비(63.4 vol%), 추출온도($54.6^{\circ}C$)에서 수율(27.7%), 폴리페놀 함량(33.2 mg GAE/g), 플라보노이드 함량(47.8 mg QE/mg dw)의 최적 결과를 얻었으며, 엉겅퀴의 경우에는 추출시간(2.9 h), 주정/초순수 부피비(40.7 vol%), 추출온도($68.4^{\circ}C$)에서 수율(27.0%), 폴리페놀 함량(17.9 mg GAE/g), 플라보노이드 함량(28.8 mg QE/mg dw)으로 예측되었으며, 종합만족도는 71.7%이다.

• 한국식품과학회지
• /
• 제50권5호
• /
• pp.474-479
• /
• 2018

포도의 안토사이아닌과 페놀 화합물의 고효율 추출을 위해 초음파 추출방법을 이용하여 반응표면분석법으로 조건을 최적화하였다. Box-Behnken design을 사용하여 시료-용매 비율, 추출시간, 초음파의 진폭을 독립변수로 하였으며, 총 안토사이아닌과 총 페놀 함량을 최대로 하는 추출조건을 최적화하였다. 총 안토사이아닌 함량은 3가지 독립변수가 유의적인 요인으로 시료-용매 비율이 증가할수록, 추출시간과 진폭은 감소할수록 총 안토사이아닌 함량이 증가하는 경향을 보였으나, 총 페놀 함량은 3가지 독립변수 모두 유의적인 요인이 아닌 것으로 나타났다. 총 안토사이아닌과 총 페놀 함량의 예측 값과 실측 값이 유사하여 본 연구에서 예측된 회귀식을 신뢰할 수 있음을 보여주었다.