• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.4
• /
• pp.231-237
• /
• 2018

In this study, two important requirements for the home production of a robot to detect and remove improvised explosive devices (IEDs) are presented in terms of the total cost for robot system development and the performance improvement of the mine detection technology. Firstly, cost analyses were performed in order to provide a reasonable solution following an engineering estimate method. As a result, the total cost for a mass production system without the mine detection system was estimated to be approximately 396 million won. For the case including the mine detection system, the total cost was estimated to be approximately 411 million won, in which labor costs and overhead charges were slightly increased and the material costs for the mine detection system were negligible. Secondly, a method for fabricating the carbon nanotube (CNT) based gas detection sensor was studied. The detection electrodes were formed by a photolithography process using a photosensitive CNT paste. As a result, this method was shown to be a scalable and expandable technology for producing excellent mine detection sensors. In particular, it was found that surface treatments by using adhesive taping or ion beam bombardment methods are effective for exposing the CNTs to the ambient air environment. Fowler-Nordheim (F-N) plots were obtained from the electron-emission characteristics of the surface treated CNT paste. The F-N plot suggests that sufficient electrons are available for transport between CNT surfaces and chemical molecules, which will make an effective chemiresistive sensor for the advanced IED detection system.

• Industrial Engineering and Management Systems
• /
• v.11 no.3
• /
• pp.288-298
• /
• 2012

Lot sizing and shipment scheduling are two interrelated decisions made by a manufacturing plant and a third-party logistics distribution center. This paper analyzes a dynamic inbound ordering problem and shipment problem with a freight container cost, in which the order size of multiple products and single container type are simultaneously considered. In the problem, each ordered product placed in a period is immediately shipped by some freight containers in the period, and the total freight cost is proportional to the number of containers employed. It is assumed that the load size of each product is equal and backlogging is not allowed. The objective of this study is to simultaneously determine the lot-sizes and the shipment schedule that minimize the total costs, which consist of production cost, inventory holding cost, and freight cost. Because the problem is NP-hard, we propose three meta-heuristic algorithms: a simulated annealing algorithm, a genetic algorithm, and a new population-based evolutionary meta-heuristic called self-evolution algorithm. The performance of the meta-heuristic algorithms is compared with a local search heuristic proposed by the previous paper in terms of the average deviation from the optimal solution in small size problems and the average deviation from the best one among the replications of the meta-heuristic algorithms in large size problems.

• Asia-Pacific Journal of Business
• /
• v.9 no.2
• /
• pp.15-37
• /
• 2018

The purpose of this paper was to explain on the conceptualisation of the Halal Orientation strategy (HOS) based on operation strategy perspective. The four variables constitute in HOS are staffing, materials, production process and storage together with transportation. By focusing on HOS, the manufacturers reinforce improvement in quality, cost control, time and flexibility of the production Halal food industry in Malaysia which is the performance objective of market competitiveness in Malaysia context. A self-administered questionnaire was designed and used to assess the significant of HOS that lead to improve quality, cost control, reduction in time and the flexibility among Halal food manufacturers in Malaysia. From a total of 443 Halal food manufacturers were involved in this study, only 137 respondents are usable for this research. The study showed significant results for the manufacturers to focus in Halal Orientation strategy (HOS) which have positive impacts on quality, cost control, time and flexibility. This research aimed to measure the HOS among food firms in Malaysia and to determine HOS in relation with the performance objective of operational outcomes.

• Journal of Korean Society of Forest Science
• /
• v.99 no.1
• /
• pp.1-8
• /
• 2010

The optimum forest road density was calculated with the method which is used in Europe on the investigation site in Korea. The economical optimum forest road density at the minimum total transport cost was 10.51 m/ha. The total transport cost was calculated 235,354 won/ha per year. The forest road construction cost amounted to 99,693 won/ha per year in case of the depreciation period of 30 years and the interest rate of 3%, the forest road maintenance cost amounted to 14,502 won/ha per year, the logging cost amounted to 99,564 won/ha per year, the cost of footpaths amounted to 18,142 won/ha per year, the cost by the loss of the production area amounted to 3,454 won/ha per year.

• Journal of the military operations research society of Korea
• /
• v.11 no.1
• /
• pp.8-32
• /
• 1985

The objective of this study is to develop the Transportation Model of Linear Programming in which optimal transportation pattern by regions (origins and destinations) to minimize the total transportation costs can be obtained for handling government-held grains. As a result of computing the Transportation Model, the total transportation costs of transporting 1,058,507 metric tons from origins to destinations are 7,234 million won. So, the transporation cost is 6,834 won per ton in this model. But actual transportation cost in 1983 is 11,498 won per ton. Therefore when we distribute and transport the government-held grains from production factories to consumption warehouses, using this Transportation Model of Linear Programming is benefitable. Especially excluding the cost of computer, we could save more than two billion won of Government budget per year.

• Journal of Korean Society of Rural Planning
• /
• v.4 no.2
• /
• pp.117-127
• /
• 1998

In this study, a model was developed to analyze the capacity and the total price of the agricultural products marketing between nations through the estimation of the production and consumption amount of the agricultural products in each nation and the analysis of the price and transport cost to each nation. The method which can contribute to the agricultural policy decision support was devised. The main concept of the method is to compute the potential import-export amount and total cost among the nations. In the application, wheat was selected to evaluate the model. The application results showed that the model could analyzed the unit consumption and storage amount per capital of each nation and the price and transport cost per unit weight from each export nation, provided the policy decision maker with the basic data analyzed by GIS.

• Fisheries and Aquatic Sciences
• /
• v.1 no.2
• /
• pp.255-259
• /
• 1998

This study was designed to evaluate the economic analysis of channel catfish production in 1998 based on fish value and total feed cost. Catfish received higher protein feeds with lesser amount based on the dietary protein levels, but received the constant total protein input for all treatments. Weight gain per pond for treatment 1 $(28\%\;protein,\;100\%\;of\;satiation)$ was higher (P<0.10) than for treatment 3 $(36\%\;protein,\;77.8\%\;of\;satiation)$, but not significantly higher than for treatment 2 $(32\%\;protein,\;87.5\%\;of\;satiation)$ at constant DE. At constant DE/P (treatments 4, 2 and 5), weight gain per pond for treatment 5 $(36\%\;protein,\;77.8\%\;of\;satiation)$ was lower (P<0.10) than for treatment 2, but not significantly lower than for treatment 4 $(28\%\;protein,\;100\%\;of\;satiation)$. At constant DE, feed conversion slightly improved as dietary protein level increased from $28\%\;to\;32\%$ and feed allowance decreased by $12.5\%$, but did not improve further as dietary protein level increased from $28\%\;to\;36\%$ and feed allowance decreased by $22.2\%$. At constant DE/P, feed conversion improved as dietary protein level increased from $28\%\;to\;32\%$ increased and feed allowance decreased by $12.5\%$, but did not improve as dietary protein level increased from $28\%\;to\;36\%$ and feed allowance decreased by $22.2\%$ Total feed cost for treatment 1 was slightly, but not significantly higher than for treatments 2 and 3 at constant DE. At constant DE/P, total feed cost for treatment 5 was higher (P<0.05) than for treatment 2, but not significantly higher than for treatment 4. Total value of fish ($ /ha) produced for treatment 1 was highest and lowest was for treatment 5. Return above feed cost was highest for treatment 1 and nearly the same as treatment 2. Return over feed cost for treatments 3 and 4 were slightly lower than for treatments 1 and 2. Economic analysis showed that feeding fish the diet containing $28\%$ protein and 3.08 kcal/g DE to satiation and the diet containing $32\%$ protein and 3.08 kcal/g DE to $87.5\%$ of satiation produced the highest profit to farmer.

• Food Science and Preservation
• /
• v.16 no.4
• /
• pp.490-498
• /
• 2009

This study attempted to examine the profitability and marketing costs of seed potato under contract farming system of BADC (Bangladesh Agricultural Development Corporation) with the help of primary and secondary data. Total 45 contract farmers were randomly selected. Attempts were made to calculate costs, returns and profitability of seed potato production under contract farming system, and to identify marketing channels of seed potato. The field level data were collected by a farm survey during the months of April 2005 through direct interviews with contract farmers and registered dealers using a structure survey questionnaire. The results showed that the gross return per hectare was Tk. 252,464 for all categories of farms. Cost of seeds, fertilizers, pesticides, irrigation and human labor were critical inputs for profitability of seed potato. Cobb-Douglas production function analysis was used to determine the effects of the key variables to seed potato production under contract farming system. The elasticity of seed potato production was at 0.727 for all categories of farms. The findings exhibited that the summation of elasticity of different inputs for seed potato production was less than one, implying that the production function exhibited decreasing returns to scale. Registered dealers and Upazila Sales Centers were involved in seed potato marketing formed a straightforward marketing channel. The total marketing costs of registered dealers were Tk. 759.49 per ton of seed potato. The net marketing margin of registered dealers was estimated at Tk. 465.51 per ton of seed potato. The selected contract farmers and registered dealers faced a number of problems and some of recommendations were suggested.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.4
• /
• pp.1-9
• /
• 2019

Recently, in the space market, there has been a rapid reduction of the launch price. The major reason is that a few commercial companies, especially SpaceX, began to enter into the space market about ten years ago, which has changed the space market from monopolization to competition, and accelerated the adoption of commercial efficiency in the technology and management. Also, the successful landing and recovery of a first stage in 2016 by SpaceX proved to be a prelude to opening a new era of reusable launch vehicles, and SpaceX declared the groundbreaking launch price through using the reusable launch vehicle. This study calculates the total launch cost required to put a certain satellite into the LEO, compares the launch cost in three cases with different payload weights, and reviews the impacts of the payload on the cost effectiveness of a reusable vehicle. The total launch cost is divided into 6 subsections cost, namely development cost, production cost, refurbishment cost, operation cost, fixed-cost of factory and launch site, and insurance cost. The cost estimation relationships used in the calculation are taken from the commonly proven cost models such as TRANSCOST.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.1
• /
• pp.107-113
• /
• 2012

To develop a practical and cost-effective medium for bioethanol production from the hydrolysate of seaweed Sargassum sagamianum, we investigated the feasibility and performance of bioethanol production in CSL (corn-steep liquor)-containing medium, where yeast Pichia stipitis was used and the repeated batch was carried out in a surface-aerated fermentor. The optimal medium replacement time during the repeated operation was determined to be 36 h, and the surface aeration rates were 30 and 100 ml/min. Under these conditions, the repeated-batch operation was successfully carried out for 6 runs (216 h), in which the maximum bioethanol concentrations reached about 11-12 g/l at each batch operation. These results demonstrated that bioethanol production could be carried out repeatedly and steadily for 216 h. In these experiments, the total cumulative bioethanol production was 57.9 g and 58.0 g when the surface aeration rates were 30 ml/min and 100 ml/min, respectively. In addition, the bioethanol yields were 0.43 (about 84% of theoretical value) and 0.44 (about 86% of theoretical value) when the surface aeration rates were 30 ml/min and 100 ml/min, respectively. CSL was successfully used as a medium ingredient for the bioethanol production from the hydrolysate of seaweed Sargassum sagamianum, indicating that this medium may be practical and cost-effective for bioethanol production.