• Carbon letters
• /
• v.11 no.3
• /
• pp.224-234
• /
• 2010

Four activated carbons were produced by two-stage process as followings; semi-carbonization of indigenous biomass waste, i.e. cotton stalks, followed by chemical activation with KOH under various activation temperatures and chemical ratios of KOH to semi-carbonized cotton stalks (CCS). The surface area, total pore volume and average pore diameter were evaluated by $N_2$-adsorption at 77 K. The surface morphology and oxygen functional groups were determined by SEM and FTIR, respectively. Batch equilibrium and kinetic studies were carried out by using a basic dye, methylene blue as a probe molecule to evaluate the adsorption capacity and mechanism over the produced carbons. The obtained activated carbon (CCS-1K800) exhibited highly microporous structure with high surface area of 950 $m^2/g$, total pore volume of 0.423 $cm^3/g$ and average pore diameter of 17.8 ${\AA}$. The isotherm data fitted well to the Langmuir isotherm with monolayer adsorption capacity of 222 mg/g for CCS-1K800. The kinetic data obtained at different concentrations were analyzed using a pseudo-first-order, pseudo-second-order and intraparticle diffusion equations. The pseudo-second-order model fitted better for kinetic removal of MB dye. The results indicate that such laboratory carbons could be employed as low cost alternative to commercial carbons in wastewater treatment.

• Journal of the Korean Ceramic Society
• /
• v.54 no.2
• /
• pp.114-120
• /
• 2017

In underdeveloped countries, many people suffer from water shortage due to the absence of water supply service. Although water purifiers have provided support in such situations, it is not easy to maintain water filters without a continuous supply of consumable filters. To obtain a sustainable drinking water source, appropriate technology of water treatment is necessary. Herein, a low cost water purification system was developed using natural raw materials. A non-electric water treatment system was developed using filtration through an Onggi filter, which is a type of Korean traditional earthenware with a microporous surface. The porosity and flux of the prepared Onggi filter were 29.06% and 31.63 LMH, respectively. After purification of water with total dissolved solids of 10.4 mg/L and turbidity of 100 NTU, the total dissolved solids and turbidity of the water treated using the Onggi filter decreased by 12% and 99.8%, respectively.

• Preventive Nutrition and Food Science
• /
• v.12 no.1
• /
• pp.40-45
• /
• 2007

The effects of drying methods on the physicochemical properties of chaga (Inonotus obliquus) mushroom powder were investigated. Scanning electron micrograph revealed that freeze drying produced smaller particle- sized samples which in turn resulted in higher porosity than did vacuum and hot-air drying. Samples prepared by freeze drying showed a significantly higher L*-value as compared with those prepared by hot-air drying and vacuum drying (p<0.05). The lightness (L*-value) significantly decreased with increasing relative humidity and storage temperature regardless of drying method (p<0.05). The yellowness (b*-value) increased significantly with increasing relative humidity (p<0.05). Browning index was significantly lower in samples prepared by freeze drying (p<0.05) but not significantly different between samples dried by hot-air and vacuum drying. Freeze dried sample exhibited a significantly higher degree of rehydration than other samples (p<0.05) probably due to the small particle size. Water solubility of the freeze dried sample was higher than those of the other methods while swelling ratio of the same sample appeared to be lower than those of others. Freeze dried chaga mushroom powder contained significantly lower amount of total phenolics and total sugar as compared to other samples (p<0.05).

• Environmental Engineering Research
• /
• v.24 no.3
• /
• pp.484-494
• /
• 2019

This paper presents a preliminary investigation of the optimum nutrients combination required for bioremediation of spent-engine oil contaminated soil using Box-Behnken-Design. Three levels of cow-manure, poultry-manure and inorganic nitrogen-phosphorus-potassium (NPK) fertilizer were used as independent biostimulants variables; while reduction in total petroleum hydrocarbon (TPH) and total soil porosity (TSP) response as dependent variables were monitored under 6-week incubation. Ex-situ data generated in assessing the degree of biodegradation in the soil were used to develop second-order quadratic regression models for both TPH and TSP. The two models were found to be highly significant and good predictors of the response fate of TPH-removal and TSP-improvement, as indicated by their coefficients of determination: $R^2=0.9982$ and $R^2=1.000$ at $p{\leq}0.05$, respectively. Validation of the models showed that there was no significant difference between the predicted and observed values of TPH-removal and TSP-improvement. Using numerical technique, the optimum values of the biostimulants required to achieve a predicted maximum TPH-removal and TSP-improvement of 67.20 and 53.42%-dry-weight per kg of the contaminated soil were as follows: cow-manure - 125.0 g, poultry-manure - 100.0 g and NPK-fertilizer - 10.5 g. The observed values at this optimum point were 66.92 and 52.65%-dry-weight as TPH-removal and TSP-improvement, respectively.

• Journal of the Korea Concrete Institute
• /
• v.15 no.3
• /
• pp.443-453
• /
• 2003

The diffusivity of carbon dioxide in concrete is very important in that it directly affects the degree of carbonation in concrete structures. The purpose of the present study is to explore the diffusivity of carbon dioxide and to derive a realistic equation to estimate the diffusion coefficient of carbon dioxide in concrete. For this purpose, several series of concrete specimens have been tested. Major test variables were the water-cement ratios. The total porosities and the diffusion coefficients of carbon dioxide were measured for the specimens. The present study indicates that the measured porosities agree well with the calculated ones. The effects of porosity and relative humidity on the diffusion coefficient of carbon dioxide were examined. A prediction equation to estimate the diffusion coefficient of carbon dioxide was derived and proposed in this study. The proposed equation shows reasonably good correlation with test data on the $CO_2$ diffusion coefficient of concrete

• Journal of the Mineralogical Society of Korea
• /
• v.23 no.2
• /
• pp.151-159
• /
• 2010

The effect of calcite and gypsum on the hydration of Portland cement was investigated using GEM-PSI, a geochemical model. Addition of calcite and gypsum up to 5 wt% of total cement clinker into Portland cement was found to influence the hydrate assemblage of the hydrated cement in different ways. The results of geochemical modelling showed that the fraction of calcium monocarbonate increased by the hydration of cement with the increase of calcite addition. The results of modelling also indicated that gypsum increased the fraction of ettringite in the assemblage of hydrated cement as the amount of gypsum added increases. This study showed that porosity generated by the hydration of cement had a significant relation with the amount of calcite and gypsum added. The porosity of hydrated cement was lower when calcite added up to 3 wt% of cement clinker compared to the hydrated cement with the same amount of gypsum addition. However, when calcite added more than 3% of cement clinker, the porosity of hydrated cement were higher than that of hydrated cement with the same amount of gypsum addition.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.87-92
• /
• 2002

At present, the polymer-modified mortars are used as high-performance as well as multi-functional materials in the construction industry. The purpose of this study is to synthesize polymer to modify in cement mortars and make test samples to understand pore size distribution. This paper deals with the effect of monomer ratio on the typical properties of polymer-modified mortars using Methylmethacrylate-Butyl Acrylate(MMA/BA) latexes synthesized through emulsion polymerization. From the results, we knew that the pore volume of polymer-modified mortars using Methylmethacrylate-Butyl Acrylate latexes at bound MMA contents of 70 and 60 percent is 7.5-75cm$^3$/g and the fine pore volume is increased with an increase in the polymer-cement ratio. The total pore volume of polymer-modified mortars using MMA/BA latexes is linearly reduced with an increase in the bound MMA content and increased in the polymer-cement ratio.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.1
• /
• pp.119-127
• /
• 2000

In this study the classified researches the artificial and natural flaws in welding parts are performed using the pattern recognition technology. For this purpose the signal pattern recognition package including the user defined function was developed and the total procedure including the digital signal processing feature extraction feature selection and classifi-er selection is teated by bulk,. Specially it is composed with and discussed using the statistical classifier such as the linear discriminant function the empirical Bayesian classifier. Also the pattern recognition technology is applied to classifica-tion problem of natural flaw(i.e multiple classification problem-crack lack of penetration lack of fusion porosity and slag inclusion the planar and volumetric flaw classification problem), According to this result it is possible to acquire the recognition rate of 83% above even through it is different a little according to domain extracting the feature and the classifier.

• Advances in environmental research
• /
• v.1 no.4
• /
• pp.305-321
• /
• 2012

This study entails establishing reference standard sand in Nigeria for engineering and geoenvironmental research work. Sands from four geographical locations in southwestern Nigeria were examined for baseline geotechnical and mineralogical properties. A total of sixteen sand samples were collected. The samples were air dried and subjected to tests in accordance with standard specifications. The tests carried out were: specific gravity, grain size analysis, moisture content, bulk density, porosity, void ratio, chemical analysis, X-ray diffraction and Differential Thermal Analysis. The properties of the samples were compared with a standard (Ottawa sand in Illinois of the United States) in order to find out which of the four samples selected from southwestern Nigeria could serve as standard baseline sand. The results show that Igbokoda sand has geotechnical and mineralogical characteristics closest to Ottawa sand. It was therefore concluded that Igbokoda sand could be used as a standard baseline sand for research work in southwestern Nigeria and other parts of Nigeria since it needs little processing to bring it to the same level as standard baseline sand, like the Ottawa sand.

• Architectural research
• /
• v.15 no.1
• /
• pp.53-58
• /
• 2013

High strength concrete is being used increasingly in mass structure projects. The purpose of this study is to investigate the influence of temperature during mixing, placing and curing on the strength development, hydration products and pore structures of high strength concrete in mass structures. The experiments were conducted with two different model walls, viz.: 1.5 m and 0.3 m under typical summer and winter weather conditions. The final part of this study deal with the clarification of the relationship between the long-term strength loss and the microstructure of the high strength concrete at high temperatures. Test results indicated that high elevated temperatures in mass concrete structures significantly accelerate the strength development of concrete at the early ages, while the long-term strength development is decreased. The long-term strength loss is caused by the decomposition of ettringite and increased the total porosity and amount of small pores.