• 제목/요약/키워드: Total friction factor

검색결과 55건 처리시간 0.028초

상하면의 마찰이 틀린 비직각주 소재의 3차원 업셋팅에 관한 연구 (A study on the three-dimensional upsetting of non-prismatic blocks considering different frictional conditions at two flat dies)

  • 김종호;류민형;양동열
    • 대한기계학회논문집
    • /
    • 제13권3호
    • /
    • pp.345-352
    • /
    • 1989
  • 본 연구에서는 3차원 변형형상을 갖는 소재에서 상하금형면의 마찰이 다른 경우에, 작각주 소재와 비직각주 소재(non-prismatic block)에 대해서 적용할 수 있는 동적 가용 속도장(kinematically admissible velocity field)을 유도해 내고자 한다.이론계산에 있어서 가공경화를 고려하기 위해 소성변형 영역을 유한개의 요소들로 나누고 이들 각 요소에 대해서 유효변형도, 유효응력을 계산하여 에너지 소비율을 계산하였다.

선박근무자의 승선경력이 정신피로 및 체력특성에 미치는 영향 (The Effects of Seaman's on Board Service Career on Physical Fitness Characteristics and Mental Fatigue)

  • 하해동;김재호
    • 한국항해학회지
    • /
    • 제25권4호
    • /
    • pp.347-360
    • /
    • 2001
  • The purpose of this study is to find out the subjective and objective fatigue level and the characteristics of seamen's physical strength with the service period on board, to have a new understanding of the vocation, and to explore a physical exercising program for the seamen. The questionnaire survey for the seamen who had been in service on the ocean going vessels was conducted and the results are fumed out as the followings. Total number of seamen who had answered the questionnaire was 64 persons and the distribution status of service period group was identified as 16 persons for each of 4 groups; the group was classified as the group of less than 5 years, 5 - 10 years, 10 - 15 years, and more than 15 years. 1. Working conditions Working hours in a week was identified as 44-56 hours(45.3%) and the number of 45.3% of the seamen answered the working hours in week is more than 56 hours. The seamen of 25.0% are unsatisfied or very unsatisfied with their vocation. The seamen of 65.6% are smoking, and 45.3% of them drink. The seamen of 44.,3% drink once or more in a week. And the seamen of 67.2% do not take any exercise in a week. 2. Contribution to the seamen's fatigue and subjective symptom The most contributive factor to the seamen's fatigue was identified as the short of sleeping(21.5%), overwork(19.2%), poor working conditions (18.6%), and the friction in human relations also becomes one the contribution to the fatigue(14.0%). The subjective symptom by fatigue was identified as the feeling of languid, sleepy and tiredness of eyes. 3. Characteristics of the seamen's physical strength and Interrelations The grip strength and back strength of the seamen whose service period is less than 5 years were measured as 40.44kg and 127.8kg. The sit ups in the group of service period less than 5 years was measured as 36.84 times, and the vertical jump for the seamen in this group was measured as 46.55cm. The closed-eyes foot balance was measured as 33.64 seconds in the group of service period between 5 and 10 years, and side-step was measured as 35.31 times in the group of service period less than 5 years. The standing trunk flexion was measured as 10.54cm for the seamen whose service period is between 10-15 years, and the trunk extension was measured as 50.70cm for the seamen whose service period is less than 5 years. And the step test of the seamen whose service period is between 10-15 years was measured as 54.44 numbers, and the number of flickers of the seamen whose service period is less than 5 years was measured as 32.94.

  • PDF

한 면에 ∧/∨형 리브가 있는 2벽면 수축 사각채널의 열전달 증가 (Enhanced heat transfer in the convergent rectangular channels with ∧/∨-shaped ribs on one wall)

  • 이명성;유지의;정희재;최동근;하동준;고진수;안수환
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제40권4호
    • /
    • pp.270-274
    • /
    • 2016
  • 양 벽면이 수축되는 채널에서 ${\vee}/{\wedge}$형 리브의 각도가 열전달에 미치는 효과를 실험적으로 조사하였다. 한 벽면에만 설치된 ${\vee}/{\wedge}$형 리브의 충돌 각은 각각 $30^{\circ}$, $45^{\circ}$, $60^{\circ}$ 그리고 $90^{\circ}$이다. 리브의 높이(e)는 10 mm 그리고 리브 간격(p)과 높이(e)비는 10으로 제작하였다. 길이가 1,000 mm인 시험 부는 입구의 단면적은 $100mm{\times}100mm$, 출구는 $50mm{\times}100mm$으로 제작하였다. 레이놀즈수가 22,000에서 75,000까지의 범위에서 실험을 수행하였다. 연구결과 전체적으로 레이놀즈 수가 높을수록 누셀트 수가 컸고, ${\wedge}$$45^{\circ}$ 리브가 가장 누셀트 수가 컸다.

Influence of coarse particles on the physical properties and quick undrained shear strength of fine-grained soils

  • Park, Tae-Woong;Kim, Hyeong-Joo;Tanvir, Mohammad Taimur;Lee, Jang-Baek;Moon, Sung-Gil
    • Geomechanics and Engineering
    • /
    • 제14권1호
    • /
    • pp.99-105
    • /
    • 2018
  • Soils are generally classified as fine-grained or coarse-grained depending on the percentage content of the primary constituents. In reality, soils are actually made up of mixed and composite constituents. Soils primarily classified as fine-grained, still consists of a range of coarse particles as secondary constituents in between 0% to 50%. A laboratory scale model test was conducted to investigate the influence of coarse particles on the physical (e.g., density, water content, and void ratio) and mechanical (e.g., quick undrained shear strength) properties of primarily classified fine-grained cohesive soils. Pure kaolinite clay and sand-mixed kaolinite soil (e.g., sand content: 10%, 20%, and 30%) having various water contents (60%, 65%, and 70%) were preconsolidated at different stress levels (0, 13, 17.5, 22 kPa). The quick undrained shear strength properties were determined using the conventional Static Cone Penetration Test (SCPT) method and the new Fall Cone Test (FCT) method. The corresponding void ratios and densities with respect to the quick undrained shear strength were also observed. Correlations of the physical properties and quick undrained shear strengths derived from the SCPT and FCT were also established. Comparison of results showed a significant relationship between the two methods. From the results of FCT and SCPT, there is a decreasing trend of quick undrained shear strength, strength increase ratio ($S_u/P_o$), and void ratio (e) as the sand content is increased. The quick undrained shear strength generally decreases with increased water content. For the same water content, increasing the sand content resulted to a decrease in quick undrained shear strength due to reduced adhesion, and also, resulted to an increase in density. Similarly, it is observed that the change in density is distinctively noticeable at sand content greater than 20%. However, for sand content lower than 10%, there is minimal change in density with respect to water content. In general, the results showed a decrease in quick undrained shear strength for soils with higher amounts of sand content. Therefore, as the soil adhesion is reduced, the cone penetration resistances of the FCT and SCPT reflects internal friction and density of sand in the total shear strength.

우리나라 양곡가공공장의 현황분석 (The Profile of Milling Plants in Korea)

  • 정창주;금동혁;강화석
    • Journal of Biosystems Engineering
    • /
    • 제3권1호
    • /
    • pp.47-63
    • /
    • 1978
  • This study was conducted to obtain a basic information necessary to assess present rice milling technology in Korea The profiles for milling plants was analyzed by survey work.For the private custom-work mills, which process about 80 percent of domestic rice consumption ,their actual milling test for the identical samples as used for filed mills was conducted. Two rice varieties Japonica and Tongil-type were associated with the experiments. The results are summarized as follows: 1. Analyses for private custom-work mills showed their general aspects as; about 91 percent of the mills belonged to an individual owner ship ; more than 93 percent of the mills was established earlier than 1950 ; about 80 percent of the mills was powered with electric motor; mills having less than two employees were about 75 percent; about 45 percent of the mills provided for warehouse in storing customers cereal grains. 2. The polishers installed in 1,255mills within the surveyed area (7 counties) have been supplied by 44 different domestic manufacturers ;in but about 60 percent of which was supplied by 6major manufacturers. The polishers could be classified into two categories in terms of principles of their polishing actions ;jet-pearler and friction types. About 51 percent of the mills was equipped with the former which has been recognized as giving greater milling recovery than the friction types. 3. Reason for owners of private mills to supplement new machines was due mainly to pgrading their mills to meet the requirements that established by the Government. However, about 60 percent of the mill owners intended to replace with new pearler by their own needs to meet with new high yielding varieties. 4. Processing systems of each previate rice mills surveyed could be classified into three categories, depending upon whether the systems posessed such components as precleaner and paddy separator or not. Only 36.7 percent of mills was installed with both precleanr ad paddy seperrator, 5.0 percent of mills did have neither percleaner nor paddy seperator, and rest of them equipped only one of the two. Hence,it is needed for about 63% of rice miils to be supplemented with these basic facilities to meet with the requirements for the standaized system. 5. Actual milling capacity measured at each field rice mills was shown a wide variation, having range from about 190 to 1,210 kg/hr. The percentages of mills classified according to daily milling capacity based on this hourly capacity were 24.3% for the capacity less than 3 M/T a day; 20.0% for 3-4 M/T; 15.6% for 4-5 M/T; 6.7% for 5-6 M/T; 22.3% for 6-7 M/T; and 11.0% for more than 7 M/T a day. 6. Actual amount of rice processed was about 310 M/T a year in average. About 42% of total milled rice was processed during October to Decembear, which formed a peak demand period for rice mills. The amount of rice milled during January to May was relatively small, but it had still a large amount compared to that during June to September. 7. Utilization rate of milling facility, i. e., percentage of the actual amount of milled rice to the capacity of rice mills, was about 18% on the year round average, about 41% in the peak demand season, and about 10% during June to September. Average number of operating days for mills surveyed was about 250 days a year, and about 21 days a month. 8. Moisture contents of paddy at the time of field mill tests were ranged 14.5% to 19.5% for both Japonica and Tong-i] varieties, majority of paddy grains having moisture level much higher than 1530. To aviod potential reduction of milling recovery while milling and deterioration of milled rice while storage due to these high grain mJisture contents, it may be very important for farmers holding rice to dry by an artificial drying method. 9. Milling recovery of JapJnica varieties in rice mills was 75.0% in average and it was widely ranged from 69.0% to 78.0 % according to mills. Potential increase in milJing recovery of Japonica variety with improvement of mill facilities was estimated to about 1.9%. On the other hand, milling recovery of Tong-il varieties in the field mill tests was 69.8% in average and it ranged from 62% to 77 %, which is much wider than that of Japonica varieties. It is noticed that the average milling recovery of Tong-il variety of 69.8% was much less than that of the Japonica-type. It was estimated th3.t up to about 5.0% of milling recovery for Tong-il variety could be improved by improving the present lo'.ver graded milling technology. 10. Head rice recoveries, as a factor of representing the quality of commercial goods, of Japonica and Tong-il varieties were 65.9% and 53.8% in average, and they were widely ranged from 52% to 73% and from 44% to 65% , respectively. It was assessed that head rice recovery of Japonica varieties can be improved up 3.3% and that of Tong-il varieties by 7.0% by improving mill components and systems.

  • PDF