• 한국식품영양과학회지
• /
• 제26권3호
• /
• pp.450-455
• /
• 1997

Scallop, Patinopecten yessonensis(Jay), cultivated in the cold east coast of Kwangwon region, Korea, is expected to be producted to about 50,000 tones in 2000 year. Freezing is one of the most effective methods applied for soraging seafoods. But, the domestic refrigerator with an automatic defrost system shows the temperature fluctuation during defrosting, thus might result in the deterioration of the frozen foods. In this study, the domestic refrigerator with an automatic defrost system, temperature fluctuation from -18 to -5$\pm$1$^{\circ}C$ and fluctuation intervals from 16 to 20 hr, was used for storing scallop. pH was decreased rapidly after 3 month storage, while the content of amino nitrogen was increased continuously. The TMA content of open state was increased very rapidly on 3 month storage and then increased slowly, whereas that of vinyl package increased slowly. The VBN content was increased almost constantly with no significant differences between storage methods. The TBA content was increased up to 3 month storage with the higher value in open state than vinyl package in the beginning periods of storage, and then decreased very rapidly. The number of total viable cell was increased continuously during storage with higher number in open state than vinyl package. The estimated shelf-lives of frozen scallop with open state and vinyl package stored at -18$^{\circ}C$ in the domestic refrigerator with an automatic defrost system were 3.55 and 3.78 months, respectively.

• 한국분말재료학회지
• /
• 제27권5호
• /
• pp.365-372
• /
• 2020

Predicting the quality of materials after they are subjected to plasma sintering is a challenging task because of the non-linear relationships between the process variables and mechanical properties. Furthermore, the variables governing the sintering process affect the microstructure and the mechanical properties of the final product. Therefore, an artificial neural network modeling was carried out to correlate the parameters of the spark plasma sintering process with the densification and hardness values of Ti-6Al-4V alloys dispersed with nano-sized TiN particles. The relative density (%), effective density (g/㎤), and hardness (HV) were estimated as functions of sintering temperature (℃), time (min), and composition (change in % TiN). A total of 20 datasets were collected from the open literature to develop the model. The high-level accuracy in model predictions (>80%) discloses the complex relationships among the sintering process variables, product quality, and mechanical performance. Further, the effect of sintering temperature, time, and TiN percentage on the density and hardness values were quantitatively estimated with the help of the developed model.

• 동아시아식생활학회지
• /
• 제14권4호
• /
• pp.355-362
• /
• 2004

Studies on extraction and color stability of carotenoids from astringent persimmon(Diospyros kaki) were performed to provide the basic information for the utilization of persimmon pigment as a new source of natural food colorant. The major carotenoids in astringent persimmon were beta-cryptoxanthin, lycopene and beta-carotene. Beta-cryptoxanthin was the first major pigment and lycopene the next. Total carotenoid content in persimmon calculated as beta-carotene equivalent was 107.4 $\mu\textrm{g}$/g. The data indicated that the astringent persimmon was a good source of carotenoid pigment. The physical and chemical stabilities of carotenoid from astringent persimmon were investigated at various conditions of temperature, pH and antioxidant. The effects of oxygen and light on the stability of carotenoid pigment has been investigated. The factors that cause the discoloration were visible light, temperature above 60, pH below 5 and oxygen. Especially, the carotenoid pigment was very sensitive to light and oxygen. Carotenoid stability was much improved with increasing nitrogen concentration in the atmosphere. Persimmon pigments have been found to be most stable at 5∼10. And tocopherol was the most effective inhibitor of the pigment discoloration.

• 한국수소및신에너지학회논문집
• /
• 제26권5호
• /
• pp.469-476
• /
• 2015

The purpose of this work is to investigate main factors to design a solid-state hydrogen stroage system with magnesium hydride with 10 wt% graphite using numerical simulation tools. The heat transfer characteristic of this material was measured in order to perform the highly reliable simulation for this system. Based on the measured effective thermal conductivity, a transient heat and mass transfer simulation revealed that the total performance of hydrogen storage system is prone to depend on heat and mass transfer behaviors of hydrogen storage medium instead of its inherent kinetic rate for hydrogen adsorption. Furthermore, we demonstrate that the thermodynamic aspect between equlibrium presssure and temperature is one of key factor to design the hydrogen storage system with high performance using magnesium hydride.

• 한국미생물·생명공학회지
• /
• 제24권5호
• /
• pp.560-566
• /
• 1996

A strain capable of producing thermostable chitinase suitable for chitooligosaccharide production was isolated from high temperature environment and identified as Bacillus licheniformis. The chitinase from Bacillus licheniformis KFB-Cl4 was only induced by addition of colloidal thitin into the basal medium as carbon source, showing the decrease of the chitinase production by supplernental addition of other carbon sources into the medium containing 1.0% colloidal chitin. Among organic and inorganic nitrogen sources, yeast extract was the most effective for the increase of total activity and specific activity, and had high affinity for the enzyme production. The optimum temperature of cell growth and thermostable chitinase production was 55$\circ$C. The optimum culture medium was composed of 1.2% colloidal chitin, 0.15% K$_{2}$HPO$_{4}$, 0.05% KH$_{2}$PO$_{4}$, 0.01% MgSO$_{4}$-7H$_{2}$O, 0.1% yeast extract (pH 6.5). Bacillus licheniformis KFB-C14 produced the thermostable chitinase of 3.89 units per ml culture fluid and 7.4 units per mg protein under rotary shaking at 150 rpm for 40 hr.

• Journal of Microbiology and Biotechnology
• /
• 제17권2호
• /
• pp.195-201
• /
• 2007

This study investigated the effects of various culture parameters (carbon sources, temperature, initial pH of culture, NaCl concentration, and light) on the growth and canthaxanthin production by Dietzia natronolimnaea HS-1. The results showed that the most effective carbon source for growth and canthaxantin production was glucose, and the best pH and temperature were 7 and $31^{\circ}C$, respectively. In addition, the biomass and canthaxanthin production increased in a medium without NaCl and in the presence of light. Under the optimized conditions, the maximum biomass, total carotenoid, and canthaxanthin production were $6.12{\pm}0.21g/l,\;4.51{\pm}0.20mg/l,\;and\;4.28{\pm}0.15mg/l$, respectively, in an Erlenmeyer flask system, yet increased to 7.25 g/l, 5.48 mg/l, and 5.29 mg/l, respectively, in a batch fermenter system.

• 펄프종이기술
• /
• 제32권1호
• /
• pp.78-85
• /
• 2000

Due to environmental proessures there is increasing use of hydrogen peroxide as a total or partial substitute for chlorine based bleaching agents within ECF or TCF sequences. However, to aceive satifactory brightness using peroxide alone, stages having a combination of high temperature, pressure, pH or residence time are required. It may also have negative impact on fiber quality . Therefore, it would be of advantage if vertain means could be found to make hydrogen peroxide more effective in bleacing , via shortening treaction time and allevaiating the need for such forcing reaction conditions. This can be achieve by converting the peroxide in-situ to stronger oxidant through the use of 손 bleach activator. In this study to investigate the influence of additives, such as tetraacetylethylenediamine (TAED) and Molybdate (MO) . addition on peroxide bleaching were carried out. Under alkaline conditions the bleching additives. TAED and Mo. can react H2O2 to form peracetic acid and peroxomolybdate respectively and these generated activators can improve deliginification,. The activators make it possible to bleach the pulp efficiently at low temperature in the range 50 to 7$0^{\circ}C$. Also, addition of TAED and Mo is an environmentally friendly way of enhancing the performance of peroxide bleaching can be incorporated into TCF and ECF sequences.

• Journal of Acupuncture Research
• /
• 제36권3호
• /
• pp.131-139
• /
• 2019

Background: This study aimed to investigate the correlation between heat transmission and intervention factors for warm acupuncture (such as features of acupuncture material and moxa, the treatment method, and clinical symptoms). Methods: Korean, English, Chinese and Japanese databases were analysed. Experimental studies that explored the association between thermal stimulation delivery and warm acupuncture intervention factors were included. The peak temperature, time to reach the peak temperature, and time of the effective stimulus, were set as the major parameters and analysed. Results: A total of 12 studies were included. Two studies were associated with the acupuncture needle material, 4 studies associated with the moxa mass, 1 study associated with the moxa density, 2 studies associated with the location of ignition, and 1 study associated with treatment environment were reviewed. The reporting quality of the 12 studies was low. Conclusion: This study provided limited information because of the heterogeneity of materials and parameters depending on each experiment. Further studies should clarify the correlation between heat transmission and intervention factors for warm acupuncture.

• 대한건축학회논문집:구조계
• /
• 제34권7호
• /
• pp.3-10
• /
• 2018

Steel fiber reinforced concrete can improve the resistance to cracking by adding steel fibers when mixing concrete. It can reduce the temperature and shrinkage cracks, and its flexural performance can be improved by increasing the effective moment of inertia. In this study, the deck-plate was used to replace the concrete form and reinforcing bars, and the steel fiber reinforced concrete was used to control the shrinkage and temperature cracks, and improve the flexural performance of the slab. Total 9 slab specimens were tested for analyzing the structural performance and serviceability. As a results, flexural capacity of the slab with deck-plate was evaluated to be superior to that of the normal reinforced concrete slab specimens with the same tensile reinforcement. The steel fiber reinforced concrete was found to have about 8% flexural capacity increase depending on the steel fiber content $15.7kg/m^3$. Also, in terms of flexural stiffness, the specimens using steel fiber reinforced concrete for the same parameters were evaluated to have a stiffness increase of about 30% compared with the case of using ordinary concrete. Especially, it was found that the stiffness of the test results was significantly higher than the analytical result because the increase of the tensile strength of the steel fiber reinforced concrete is not reflected in the current structural code.

• Journal of Chest Surgery
• /
• 제32권5호
• /
• pp.456-460
• /
• 1999

배경: 다한증에 대한 흉부교감신경절제술은 흉강경기구 및 수술술기 발달로 효과적인 치료방법으로 인식되고 있으나 보상성 다한증으로 그 만족도가 떨어지고 있다. 따라서 저자들은 수술결과 및 보상성 다한증을 분석하고자 하였으며 수술전후 손과 발의 온도 차이 그리고 상지와 하지의 혈류량을 측정하였다. 대상 및 방법: 1995년 12월부터 1998년 7월까지 강남성모병원에서 총 47명의 다한증환자를 흉강경하에 교감신경절제술을 시행하였다. 수술전후로 손가락 및 발가락에서 온도변화를 측정하였고, 혈류량 측정은 도플러 초음파검사로 손가락동맥, 요골동맥, 그리고 족배동맥에서 측정하였다. 결과: 수술사망은 없었으며, 기흉 7건, 재발 3건, 안검하수 1건등의 합병증이 있었다. 보상성 다한증은 수술한 환자의 95%에서 있었으며 이중 5명이 수술을 후회하였다. 족부 다한증은 흉부교감신경절제술후 46%에서 향상되었고, 수술전후 온도변화는 우측 손에서 1$^{\circ}C$, 좌측 손에서 1.9$^{\circ}C$였고 통계적으로 의미있게 증가하였다. 그러나 족부 다한증에서는 의미있는 온도차이가 없었다. 혈류량은 손에서 의미있게 증가하였으나 발에서는 차이가 없었다. 결론: 다한증의 흉부 교감신경절제술은 안전하고 효과적인 치료이지만 그 만족도는 보상성 다한증에 의해 감소하고 있으므로 수술전에 보상성 다한증에 대하여 충분히 설명하는 것이 중요하다. 족부 다한증은 생리적 변화에 의한 것이라기 보다는 정신적 안정에 의한 것으로 보인다.