• Journal of the Korean Society of Food Science and Nutrition
• /
• v.26 no.3
• /
• pp.450-455
• /
• 1997

Scallop, Patinopecten yessonensis(Jay), cultivated in the cold east coast of Kwangwon region, Korea, is expected to be producted to about 50,000 tones in 2000 year. Freezing is one of the most effective methods applied for soraging seafoods. But, the domestic refrigerator with an automatic defrost system shows the temperature fluctuation during defrosting, thus might result in the deterioration of the frozen foods. In this study, the domestic refrigerator with an automatic defrost system, temperature fluctuation from -18 to -5$\pm$1$^{\circ}C$ and fluctuation intervals from 16 to 20 hr, was used for storing scallop. pH was decreased rapidly after 3 month storage, while the content of amino nitrogen was increased continuously. The TMA content of open state was increased very rapidly on 3 month storage and then increased slowly, whereas that of vinyl package increased slowly. The VBN content was increased almost constantly with no significant differences between storage methods. The TBA content was increased up to 3 month storage with the higher value in open state than vinyl package in the beginning periods of storage, and then decreased very rapidly. The number of total viable cell was increased continuously during storage with higher number in open state than vinyl package. The estimated shelf-lives of frozen scallop with open state and vinyl package stored at -18$^{\circ}C$ in the domestic refrigerator with an automatic defrost system were 3.55 and 3.78 months, respectively.

• Journal of Powder Materials
• /
• v.27 no.5
• /
• pp.365-372
• /
• 2020

Predicting the quality of materials after they are subjected to plasma sintering is a challenging task because of the non-linear relationships between the process variables and mechanical properties. Furthermore, the variables governing the sintering process affect the microstructure and the mechanical properties of the final product. Therefore, an artificial neural network modeling was carried out to correlate the parameters of the spark plasma sintering process with the densification and hardness values of Ti-6Al-4V alloys dispersed with nano-sized TiN particles. The relative density (%), effective density (g/㎤), and hardness (HV) were estimated as functions of sintering temperature (℃), time (min), and composition (change in % TiN). A total of 20 datasets were collected from the open literature to develop the model. The high-level accuracy in model predictions (>80%) discloses the complex relationships among the sintering process variables, product quality, and mechanical performance. Further, the effect of sintering temperature, time, and TiN percentage on the density and hardness values were quantitatively estimated with the help of the developed model.

• Journal of the East Asian Society of Dietary Life
• /
• v.14 no.4
• /
• pp.355-362
• /
• 2004

Studies on extraction and color stability of carotenoids from astringent persimmon(Diospyros kaki) were performed to provide the basic information for the utilization of persimmon pigment as a new source of natural food colorant. The major carotenoids in astringent persimmon were beta-cryptoxanthin, lycopene and beta-carotene. Beta-cryptoxanthin was the first major pigment and lycopene the next. Total carotenoid content in persimmon calculated as beta-carotene equivalent was 107.4 $\mu\textrm{g}$/g. The data indicated that the astringent persimmon was a good source of carotenoid pigment. The physical and chemical stabilities of carotenoid from astringent persimmon were investigated at various conditions of temperature, pH and antioxidant. The effects of oxygen and light on the stability of carotenoid pigment has been investigated. The factors that cause the discoloration were visible light, temperature above 60, pH below 5 and oxygen. Especially, the carotenoid pigment was very sensitive to light and oxygen. Carotenoid stability was much improved with increasing nitrogen concentration in the atmosphere. Persimmon pigments have been found to be most stable at 5∼10. And tocopherol was the most effective inhibitor of the pigment discoloration.

• Transactions of the Korean hydrogen and new energy society
• /
• v.26 no.5
• /
• pp.469-476
• /
• 2015

The purpose of this work is to investigate main factors to design a solid-state hydrogen stroage system with magnesium hydride with 10 wt% graphite using numerical simulation tools. The heat transfer characteristic of this material was measured in order to perform the highly reliable simulation for this system. Based on the measured effective thermal conductivity, a transient heat and mass transfer simulation revealed that the total performance of hydrogen storage system is prone to depend on heat and mass transfer behaviors of hydrogen storage medium instead of its inherent kinetic rate for hydrogen adsorption. Furthermore, we demonstrate that the thermodynamic aspect between equlibrium presssure and temperature is one of key factor to design the hydrogen storage system with high performance using magnesium hydride.

• Microbiology and Biotechnology Letters
• /
• v.24 no.5
• /
• pp.560-566
• /
• 1996

A strain capable of producing thermostable chitinase suitable for chitooligosaccharide production was isolated from high temperature environment and identified as Bacillus licheniformis. The chitinase from Bacillus licheniformis KFB-Cl4 was only induced by addition of colloidal thitin into the basal medium as carbon source, showing the decrease of the chitinase production by supplernental addition of other carbon sources into the medium containing 1.0% colloidal chitin. Among organic and inorganic nitrogen sources, yeast extract was the most effective for the increase of total activity and specific activity, and had high affinity for the enzyme production. The optimum temperature of cell growth and thermostable chitinase production was 55$\circ$C. The optimum culture medium was composed of 1.2% colloidal chitin, 0.15% K$_{2}$HPO$_{4}$, 0.05% KH$_{2}$PO$_{4}$, 0.01% MgSO$_{4}$-7H$_{2}$O, 0.1% yeast extract (pH 6.5). Bacillus licheniformis KFB-C14 produced the thermostable chitinase of 3.89 units per ml culture fluid and 7.4 units per mg protein under rotary shaking at 150 rpm for 40 hr.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.2
• /
• pp.195-201
• /
• 2007

This study investigated the effects of various culture parameters (carbon sources, temperature, initial pH of culture, NaCl concentration, and light) on the growth and canthaxanthin production by Dietzia natronolimnaea HS-1. The results showed that the most effective carbon source for growth and canthaxantin production was glucose, and the best pH and temperature were 7 and $31^{\circ}C$, respectively. In addition, the biomass and canthaxanthin production increased in a medium without NaCl and in the presence of light. Under the optimized conditions, the maximum biomass, total carotenoid, and canthaxanthin production were $6.12{\pm}0.21g/l,\;4.51{\pm}0.20mg/l,\;and\;4.28{\pm}0.15mg/l$, respectively, in an Erlenmeyer flask system, yet increased to 7.25 g/l, 5.48 mg/l, and 5.29 mg/l, respectively, in a batch fermenter system.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.32 no.1
• /
• pp.78-85
• /
• 2000

Due to environmental proessures there is increasing use of hydrogen peroxide as a total or partial substitute for chlorine based bleaching agents within ECF or TCF sequences. However, to aceive satifactory brightness using peroxide alone, stages having a combination of high temperature, pressure, pH or residence time are required. It may also have negative impact on fiber quality . Therefore, it would be of advantage if vertain means could be found to make hydrogen peroxide more effective in bleacing , via shortening treaction time and allevaiating the need for such forcing reaction conditions. This can be achieve by converting the peroxide in-situ to stronger oxidant through the use of 손 bleach activator. In this study to investigate the influence of additives, such as tetraacetylethylenediamine (TAED) and Molybdate (MO) . addition on peroxide bleaching were carried out. Under alkaline conditions the bleching additives. TAED and Mo. can react H2O2 to form peracetic acid and peroxomolybdate respectively and these generated activators can improve deliginification,. The activators make it possible to bleach the pulp efficiently at low temperature in the range 50 to 7$0^{\circ}C$. Also, addition of TAED and Mo is an environmentally friendly way of enhancing the performance of peroxide bleaching can be incorporated into TCF and ECF sequences.

• Journal of Acupuncture Research
• /
• v.36 no.3
• /
• pp.131-139
• /
• 2019

Background: This study aimed to investigate the correlation between heat transmission and intervention factors for warm acupuncture (such as features of acupuncture material and moxa, the treatment method, and clinical symptoms). Methods: Korean, English, Chinese and Japanese databases were analysed. Experimental studies that explored the association between thermal stimulation delivery and warm acupuncture intervention factors were included. The peak temperature, time to reach the peak temperature, and time of the effective stimulus, were set as the major parameters and analysed. Results: A total of 12 studies were included. Two studies were associated with the acupuncture needle material, 4 studies associated with the moxa mass, 1 study associated with the moxa density, 2 studies associated with the location of ignition, and 1 study associated with treatment environment were reviewed. The reporting quality of the 12 studies was low. Conclusion: This study provided limited information because of the heterogeneity of materials and parameters depending on each experiment. Further studies should clarify the correlation between heat transmission and intervention factors for warm acupuncture.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.7
• /
• pp.3-10
• /
• 2018

Steel fiber reinforced concrete can improve the resistance to cracking by adding steel fibers when mixing concrete. It can reduce the temperature and shrinkage cracks, and its flexural performance can be improved by increasing the effective moment of inertia. In this study, the deck-plate was used to replace the concrete form and reinforcing bars, and the steel fiber reinforced concrete was used to control the shrinkage and temperature cracks, and improve the flexural performance of the slab. Total 9 slab specimens were tested for analyzing the structural performance and serviceability. As a results, flexural capacity of the slab with deck-plate was evaluated to be superior to that of the normal reinforced concrete slab specimens with the same tensile reinforcement. The steel fiber reinforced concrete was found to have about 8% flexural capacity increase depending on the steel fiber content $15.7kg/m^3$. Also, in terms of flexural stiffness, the specimens using steel fiber reinforced concrete for the same parameters were evaluated to have a stiffness increase of about 30% compared with the case of using ordinary concrete. Especially, it was found that the stiffness of the test results was significantly higher than the analytical result because the increase of the tensile strength of the steel fiber reinforced concrete is not reflected in the current structural code.

• Journal of Chest Surgery
• /
• v.32 no.5
• /
• pp.456-460
• /
• 1999

Background: Thoracic sympathectomy for hyperhidrosis has been recognized as an effective treatment using thoracoscopic devices and operative techniques, but the satisfaction has decreased due to a compensatory hyperhidrosis. Therefore, the postoperative results and compensatory hyperhidrosis were analyzed. We also measured the temperature differences in the hand and foot during the preoperative and postoperative periods and measured the blood flow of upper and lower extremities. Material and Method: From December 1995 to July 1998, total of 47 patients with hyperhidrosis underwent sympathectomy via VATS at the Department of Thoracic and Cardiovascular Surgery, Kangnam St. Mary's Hospital. The patients were evaluated for preoperative and postoperative temperature changes on the finger and toe, and preoperative and postoperative blood flows were measured by the Doppler examination on the digital artery, radial artery and dorsalis pedis artery. Result: There were no operative deaths but some complications existed: 7 pneumothorax, 3 recurrence and 1 Honor syndrome. Ninety-five percent of the patients also had compensatory sweating especially in the trunk. There were 5 patients who regretted recurring the operation because of the compensatory sweating. Sweating decreased in 46% of the sole hyperhidrosis patients. The temperature difference between preoperation and postoperation was 1$^{\circ}C$ on the right hand side and 1.9$^{\circ}C$ on the left hand side(P<0.05). There was no significant temperature difference on the sole. Blood flow increased significantly in the palm, but no difference in the sole. Conclusion: In conclusion, thoracic sympathectomy for hyperhidrosis is a safe and effective treatment but satisfaction has been decreased by the compensatory sweating; therefore, it is important to thoroughly explain the compensatory sweating prior to surgery. Improvement of the plantar hyperhidrosis is not due to a physiological change, but to a psychological stability.