• Journal of the Korean Solar Energy Society
• /
• v.33 no.5
• /
• pp.51-59
• /
• 2013

It is usual to evaluate the performance of the cool roof by measuring in-site rooftop temperature using thermal infra-red camera. The principal advantage of rooftop thermal infrared image acquired in oblique vantage point of super high-rise building as a remote sensor is to provide, in a cost-effective manner, area-wide information required for a scattered rooftop target with different colors, utilizing wide view angle and multi-temporal data coverage. This research idea was formulated by incorporating the concept of traditional remote sensing into rooftop temperature monitoring. Correlations between infrared image of super high-rise building and in-situ data were investigated to compare rooftop surface temperature for a total of four different rooftop locations. The results of the correlations analyses indicate that the rooftop surface temperature by the infrared images of super high-rise building alone could be explained yielding $R^2$ values of 0.951. The visible permanent record of the oblique thermal infra-red image was quite useful in better understanding the nature and extent of rooftop color that occurs in sampling points. This thermal infrared image acquired in oblique vantage point of super high-rise made it possible to identify area wide patterns of rooftop temperature change subject to many different colors, which cannot be acquired by traditional in-site field sampling. The infrared image of super high-rise building breaks down the usual concept of field sampling established as a conventional cool roof performance evaluation technique.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.05a
• /
• pp.142-145
• /
• 2004

In this work, we have investigated the application of rapid thermal processing (RTP) and plasma enhanced chemical vapour deposition (PECVD) for surface passivation. Rapid thermal oxidation (RTO) has sufficiently low surface recombination velocities (SRV) $S_{eff}$ in spite of a thin oxides and short process time. The effective lifetime is increasing with an increase of the oxide thickness. In the same oxide thickness, The effective lifetime is independent on the process temperature and time. $S_{eff,max}$ is exponentially decreased with increasing oxide thickness. $S_{eff,max}$ can be reduced to 200 cm/s with only 10 nm oxide thickness. On the other hand, three different types of SiN are reviewed. SiN1 layer has a thickness of about 72 nm and a refractive index of 2.8. Also, The SiN1 has a high passivation quality. The effective lifetime and SRV of 1 $\Omega$ cm Float zone (FZ) silicon deposited with SiN1 is about 800 s and under 10 cm/s, respectively. The SiN2 is optimized for the use as an antireflection layer since a refractive index of 2.3. The SiN3 is almost amorphous silicon caused by less contents of N2 from total process. The effective lifetime on the FZ 1 ${\Omega}cm$ is over 1000 ${\mu}s$.

• Clean Technology
• /
• v.22 no.3
• /
• pp.168-174
• /
• 2016

The working environment is deteriorated due to a rise in temperature of a coal mine caused by increase of its depth and carriage tunnels. To improve the environment, the temperature distribution resulted by using the fan type ventilation system aiming for the temperature drop is calculated by using a fluid dynamic analysis program. The analysis shows that A coal mine needs 6,152 m³ min^-1 for in-flow ventilation rate but the total input air flowrate is 4,710 m³ min^-1, 1,442 m³ min^-1 of in-flow ventilation rate shortage and the temperature between the carriage tunnel openings and the workings with exhausting ventilation system type is 2~3 ℃ less than that with blowing ventilation system type. The exhausting ventilation system type would be more effective than blowing ventilation system when the distance between the carriage tunnel openings and the workings is relatively far.

• Korean Journal of Remote Sensing
• /
• v.29 no.6
• /
• pp.595-600
• /
• 2013

In order to spatially interpolate the near-surface temperature (Ta) values, satellite and reanalysis methods were used from previous studies. Accuracy of reanalysis Ta was generally better than that of satellite-based Ta, but spatial resolution of reanalysis Ta was large to use at local scale studies. Our purpose is to evaluate accuracy of reanalysis Ta and satellite-based Ta according to elevation from April 2011 to March 2012 in Northeast Asia that includes various topographic features. In this study, we used reanalysis data that is ERA-Interim produced by European Centre for Medium-Range Weather Forecasts (ECMWF), and estimated satellite-based Ta using Digital Elevation Meter (DEM), Normalized Difference Vegetation Index (NDVI), difference between brightness temperature of $11{\mu}m$ and $12{\mu}m$, and Land Surface Temperature (LST) data. The DEM data was used as auxiliary data, and observed Ta at 470 meteorological stations was used in order to evaluate accuracy. We confirmed that the accuracy of satellite-based Ta was less accurate than that of ERA-Interim Ta for total data. Results of analyzing according to elevation that was divided nine cases, ERA-Interim Ta showed higher accurate than satellite-based Ta at the low elevation (less than 500 m). However, satellite-based Ta was more accurate than ERA-Interim Ta at the higher elevation from 500 to 3500 m. Also, the width of the upper and lower quartile appeared largely from 2500 to 3500 m. It is clear from these results that ERA-Interim Ta do not consider elevation because of large spatial resolution. Therefore, satellite-based Ta was more effective than ERA-Interim Ta in the regions that is range from 500 m to 3500 m, and satellite-based Ta was recommended at a region of above 2500 m.

• Journal of Radiation Protection and Research
• /
• v.22 no.3
• /
• pp.143-151
• /
• 1997

As the pulse heights from a NaI(Tl) detector vary with the temperature of the measuring environment a significant change in temperature may affect the energy calibration of the spectrometer. The auto-adjustment of the channel corresponding to a pulse heights can be achieved by introducing an external reference source to compensate the temperature dependency of pulse heights, but unfavorable increases of the Compton continuum are caused due to the external source. In this study, the total absorption peaks dominant in the typical environmental gamma spectrum-239 keV from $^{212}Pb$, 351 keV from $^{214}Pb$, 1460 keV from $^{40}K$ and 2614 keV from $^{208}Tl$ for examples - were used as reference in the correction of energy calibration. With these peaks, the program to calibrate the energy of the s spectrum was developed using Microsoft Visual Basic language. The program developed here was applied to the environmental spectra measured at intervals of 30 minutes in the temperature range of from $-20^{\circ}C$ to $10^{\circ}C$ to demonstrate the validity and applicability. As a result of the test, the correction scheme appeared to be effective in the temperature changes encountered in the usual environment.

• Magazine of the Korea Concrete Institute
• /
• v.8 no.4
• /
• pp.141-148
• /
• 1996

The pulished works on Accelerated Curing Effect were generally performed around from 1960 to 1970th century for 18 to 24 hours - total curing periods. It is not possible to define the effect of temperature rise because those results were obtaine mainly by using the manually operated steam-curing tank. Thus, it may not be available to apply those data immediately on the domestic PC wall production line. The testing specimens were made from the standard mix proportion according to those of domestic PC factories to establish a basic data for the Accelerated Curing Effect. The experimental tests were conducted according to the conditions of each sub-curing periods. By comparing the results of compression tests on de-molded and 28-day water-curing specimens, we find that the most effective curing condition to obtain more than the required design strength after 28 day of water curing may be as follows: the presteaming period does not affect seriously and less than$30^{circ}C/hr$- the rate of temperature rise andless than $82^{circ}C$ - maximum temperature are necessary. It seems that post-curing procedure is very important factor to increase the effect of accelerated curing.

• Korean Journal of Ecology and Environment
• /
• v.46 no.2
• /
• pp.225-233
• /
• 2013

We examined the effect of different field temperatures on water quality improvement (WQI) of natural domestic plant-mineral composites (PMCs). This method was previously used by Kim et al. (2011), to monitor the restoration of water quality of a eutrophic lake, Lake Shingal (Korea). Results indicate that PMCs on phytoplankton, BOD and phosphorus showed more than 70% WQI below $20^{\circ}C$, and less than 40% WQI over $25^{\circ}C$, respectively. The WQIs of PMCs on blue-green algae were gradually decreased with the increase of temperature, whilst diatoms exhibited more than 90% higher WQIs, regardless of water temperature. Additionally, the WQIs on bacterial biomass and total nitrogen were low at all temperatures. These results collectively indicate that water quality improvement activity of plant-mineral composites was dependent on the water temperature, and that the field application of above chemical during temperatures over $25^{\circ}C$, would be less effective in treating a cyanobacteria bloom dominated by Microcystis aeruginosa, than by diatoms.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.4
• /
• pp.512-520
• /
• 2008

In order to examine the effective components and antioxidative characteristics of Acanthopanacis cortex, response surface methodology was used to optimize the hot water extraction process by analyzing and monitoring the extraction condition characteristics. The total extraction yield was optimized using the extraction temperature of $84.28^{\circ}C$, extraction time of 3.59 hr and 18.37 mL/g as the amount of solvent per sample. For the effective component of eleutheroside E, the optimal extraction temperature, time and amount of solvent per sample were $81.16^{\circ}C$, 3.56 hr, and 19.06 mL/g, respectively; also, for total phenolics, the optimal conditions were $88.45^{\circ}C$, 4.33 hr, and 21.12 mL/g, respectively. Regression equations were deduced for each variable and then eleutheroside E, chlorogenic acid, and antioxidative characteristics were superimposed with the optimal conditions to obtain values for each extraction process factor. The predicted results were $81{\sim}88^{\circ}C$, $3.5{\sim}4.3hr$, and $18{\sim}21mL/g$, respectively. The estimated values for the optimal extraction conditions of Acanthopanacis cortex's effective components and antioxidative characteristics were similar to the experimental results.

• Journal of Life Science
• /
• v.18 no.4
• /
• pp.556-564
• /
• 2008

Response surface methodology was used to monitor the optimization of fermentation conditions for red ginseng wine. A central composite design was applied to investigate the effects of independent variables, fermentation temperature ($X_1$), fermentation time ($X_2$) and initial pH ($X_3$) on dependent variables, physicochemical characteristics and effective ingredients. Alcohol and total sugar content were significantly affected both by fermentation temperature and time. Crude saponin content was greatly affected by fermentation time, and pH was significantly affected by initial pH. Fermentation time and initial pH had a greater effect on ginsenoside content than fermentation temperature. Ginsenoside content increased along with fermentation time and initial pH. We elicited a regression formula for each variable, and superimposed the total optimum points of fermentation conditions for physicochemical characteristics and the effective constituents. The predicted values at the optimum fermentation conditions were at $21{\sim}27^{\circ}C$ for $15{\sim}20$ day in initial pH $4.6{\sim}5.2$.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.3
• /
• pp.362-369
• /
• 1996

Seven different drying methods were tested in peony roots of Euisung cultivar, harvested in February, in three year's old plant. The roots were selected in length and diameter and half of the samples were removed cork-layers to compare the effects of cork-layer in processing of drying. The 3$0^{\circ}C$ heat drying without cork-layer reduced in days to drying by five days compared to those of the with cork-layers at the same temperature. The 5$0^{\circ}C$ heat drying after cork-layers removed was the most effective in days to drying. In quality of skin color of the 5$0^{\circ}C$ heating was worse to compare with the lower drying temperature. In the drying at room temperature and the heat drying at lower temperature, the paeoniflorin content in drying after cork-layers removed were higher than that of the drying with cork-layers. However, in the boiling water treatment, the paeoniflorin contents in drying after cork-layers removed were lower than those of with cork-layers. In heat drying, paeoniflorin content showed a decreasing tendency to increase of drying temperature. Total sugars in the peony roots showed a decreasing tendency according to the drying temperature increasing, but starch concentration showed a increasing tendency at the same condition. Concentrations of crude protein, crude fiber and crude ash were showed no differences in various drying methods and the materials with or without cork-layers. Relationships between the paeoniflorin and total sugars, and the paeoniflorin and starch were different significantly by the materials of cork-layers removed or not. The 30~4$0^{\circ}C$ heat drying without cork-layers was the most advisable condition for drying in paeoniflorin concentration, days to drying and skin color after drying.