• Journal of the Korean Solar Energy Society
• /
• v.30 no.5
• /
• pp.100-106
• /
• 2010

The purpose of this study is to predict the effective sky temperature on Osan City during the summer. The north latitude, east longitude of Osan City is $37^{\circ}06'$ and $127^{\circ}02'$. The altitude from the sea level is 48m. Empirical relations of the effective sky temperature suggested by Duffie and Beckman are compared on clear days. For the effective sky temperature prediction, data measured by the Korea Meteorological Administration is used as an input to the Bliss model. Both Hottel and Krondratyev model are used to calculate the water vapor emissivity. The results using Hottel's model match well with the empirical relation proposed by Bliss. The results show maximum, minimum, and average values depending on water vapor emissivity model. The maximum deviation is about 10K and is due to total emissivity model.

• 한국태양에너지학회:학술대회논문집
• /
• 2008.11a
• /
• pp.220-225
• /
• 2008

Cylindrical stainless-steel/sodium heat pipe for a high-temperature solar thermal application was manufactured and tested for transient and steady-state operations. Two layers of stainless-steel screen mesh wick was inserted as a capillary structure. The outer diameter of the heat pipe was 12.7 mm and the total length was 250 mm. The effective heat transport length, the thermal load, and the operating temperature were varied as thermal transport conditions of the heat pipe. The thermal load was supplied by an electric furnace up to 1kW and the cooling was performed by forced convection of air The effective thermal conductivity and the thermal resistance were investigated as a function of heat flux, heat transport length, and vapor temperature. Typical range of the total effective thermal conductivity was as low as 43,500 W/m K for heat flux of 176.4 kW/$m^2$ and of operating temperature of 1000 K.

• Korean Journal of Ecology and Environment
• /
• v.38 no.spc
• /
• pp.22-26
• /
• 2005

Egg incubation periods of 14 species of plecoptera were examined at $10^{\circ}\;{\sim}\;11^{\circ}C$, $15^{\circ}\;{\sim}\;16^{\circ}C$, $20^{\circ}C$, and $23^{\circ}C$ under dark conditions. The total effective temperature (TET) was calculated by multiplying mean egg incubation days and water temperature of incubation periods. The relation between the TET and the incubation temperature was used to compare the life cycle of respective species. Perlodid species had higher TET values with a positive relation to incubation temperature than those of other species. Perlid species had low TET values in the 14 species with negative to variable relation, and Chloroperlid species showed variable to positive relations to incubation temperature. These results suggest that the relation between the TET and the water temperature reflected on their habitat of respective species.

• Journal of Korean Society on Water Environment
• /
• v.22 no.1
• /
• pp.166-171
• /
• 2006

The objectives of the present paper were to investigate the concentration of total coliform in wastewater effluents and the effect of water chemical and physical characters in it. The most correlated parameter with total coliform was COD. It means that the wastewater treatment efficient effects on total coliform concentration. And we developed predictive model for the total coliform concentration. The estimated parameters for model were COD, temperature, nitrite, chloride, Mn and regression model equation was determined; log (Total Coli.) = 1.861+0.065[COD]+0.038[temperature]-0.0004[$Cl^-$]+3.697[Mn]-0.32 [$NO_2-N$] The developed model provided very strong correlation ($R^2:0.82$) between total coliform and regression equation. The parameters having high sensitivity were COD and temperature. So the study indicated that if the temperature and COD of wastewater effluent were known, we would estimate the concentration of total coliform and decide the most effective usage of chlorine.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2340-2345
• /
• 2008

Cylindrical stainless-steel/sodium heat pipe for a high-temperature application was manufactured and tested for transient and steady-state operations. Two layers of Stainless-steel screen mesh wick was inserted as a capillary structure. The outer diameter of the heat pipe was 12.7 mm and the total length was 250 mm. As thermal transport conditions, the effective transport length, the heat flux, the tilt angle and the operating temperature were varied. The heat was supplied by an electric furnace up to 1 kW and the cooling was performed by forced convection of air. The effective thermal conductivity and the thermal resistance were investigated as a function of heat flux, heat transport length, and vapor temperature. Typical range of the total thermal resistance was as low as $0.036^{\circ}C/W$ at $175.8\;kW/m^2$ of heat flux and $700^{\circ}C$ of operating temperature.

• Journal of Advanced Marine Engineering and Technology
• /
• v.21 no.4
• /
• pp.421-429
• /
• 1997

This study is theoretically examined the influences on the performance of diesel engine super¬charged by exhaust gas turbine with the change of excess air factor, admission ratio, total efficien¬cy of turbine and compressor, scavenging pressure ratio, and scavenging temperature. In this study, all calculations are carried out by computer, and the theoretical engine performance is com¬pared with the actual engine performance which is offered from engine manufacturer. Following results are acquired by this study. The mean effective pressure is increased with decrease of excess air factor or increase of scavenging pressure ratio. As the admission ratio or total efficiency of tur¬bine is increased, the mean effective pressure is increased but the specific fuel consumption is decreased. Mean calculation error compared with the actual engine performance is under 5 per¬cents, therefore, this calculation method can be used in the design of diesel engine.

• Fashion & Textile Research Journal
• /
• v.22 no.2
• /
• pp.250-260
• /
• 2020

The purpose of the present study was to explore the most effective body region and cooling temperature to alleviate heat strain of workers in hot environments. We developed liquid cooling hood, vest, sleeves and socks and applied the water temperatures of 10, 15, 20, and 25℃ through the liquid cooling garments in a hot and humid environment (33℃ air temperature and 70% RH air humidity). A healthy young male participated in a total of 16 experimental trials (four cooling garments × four cooling temperatures) with the following protocol: 10-min rest, 40-min exercise on a treadmill and 10-min recovery. The results showed that rectal temperature, mean skin temperature, and ratings of perceived exertion during exercise; heart rate and diastolic blood pressure during recovery; and total sweat rate were lower for the vest condition than other garment conditions(p < .05). However, there was no differences in mean skin temperature among the four cooling garments when we compared the values converted by covering area(%BSA). When we classified the results by cooling temperature, there were no consistent differences in thermoregulatory and cardiovascular responses among the four temperatures, but 25℃ water temperature was evaluated as being the most ineffective cooling temperature in terms of subjective responses. In conclusion, the results indicated that wearing cooling vest with < 20℃ cooling temperature can alleviate heat strain of workers in hot and humid environments. If the peripheral body regions are cooled with liquid cooling garments, larger cooling area with lower cooling temperature than 10℃ would be effective to reduce heat strain of workers. Further studies with a vaild number of subjects are required.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.11
• /
• pp.1549-1554
• /
• 2000

A new method to determine the total heat exchange factor was proposed for the prediction of billet temperature in a reheating furnace. This method employed the squared of the difference between measured and predicted temperatures as an objective function. The real billet temperature in a walking beam type reheating furnace with 19.75m of its effective length was directly measured by thermocouples. The present method was validated by showing that the predicted billet temperature was in a good agreement with the measured one.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.247-250
• /
• 2009

Sodium heat pipe for high-temperature solar thermal application was manufactured and tested for transient and steady-state operations. Total length of the heat pipe was 650 mm and the outer diameter was 12.7 mm. Thermal performance was compared experimentally for two different cooling methods of the forced and the natural convection cooling in the heat pipe condenser. During the experiment, the maximum temperature was about 1300K, and different cooling methods were applied to the condenser region to charge the operating temperature. The effective thermal conductivity and the thermal resistance were investigated as a function of heat flux, heat transport length, and operating temperature.

• Journal of Life Science
• /
• v.10 no.1
• /
• pp.1-6
• /
• 2000

Larval development, adult longevity and oviposition of the beet armyworm, Spodoptera exigua H bner was studied at 16, 20, 25 and 3$0^{\circ}C$ with a 16L: 8D photoperiod. Egg hatchability of S. exigua was the highest at 3$0^{\circ}C$ and reduced with decreasing temperature. Egg period was the shortest at 3$0^{\circ}C$ and prolonged with decreasing temperature. Percent pupation was became higher at higher temperature form 23.2% to 94.0%. Developmental period of larva was the shortest at 3$0^{\circ}C$, but extended with decreasing temperature. Adult emergence ratio was the highest at 3$0^{\circ}C$ and reduced with decreasing temperature. The mean pupal period was 35.2, 14.4, 7.8 and 5.0 days at 16, 20, 25 and 3$0^{\circ}C$, respectively. Relationships between constant temperature and the developmental velocity of egg, larva and pupa were linear. Developmental threshold temperature seems to be 13.3 8$^{\circ}C$ for egg, 14.02$^{\circ}C$ for larva, 14.09$^{\circ}C$ for pupa, and 13.84$^{\circ}C$ for egg the adult. Estimated value of the total effective temperature for completing each stage was 36.89 day-degree for egg, 155.72 day-degree for larva, 79.20 day-degree for pupa, and 273.41 day-degree for egg to adult. Female longevity varied to temperature from 11.4 days at 16$^{\circ}C$ to 5.8 days at 3$0^{\circ}C$, and male longevity was longer than that of female. Preoviposition period was the shortest at 3$0^{\circ}C$, but prolonged with decreasing temperature. It was about 2.7 times longer at 16$^{\circ}C$ than that at 3$0^{\circ}C$. Number of eggs per female was the highest at $25^{\circ}C$, followed by 20, 30 and 16$^{\circ}C$.