• Journal of the Korean Ceramic Society
• /
• v.33 no.7
• /
• pp.761-770
• /
• 1996

Silicon carbide (SiC) films were deposited by low pressure chemical vapor deposition (LPCVD) using MTS (CH3SICl3) in a hydrogen atmosphere onto graphite substrates. Depletion effects of reactants which usually occur in the hot wall horizaontal reactor were increased with deposition temperature and pressure. Below 50 torr of total pressure (111) plane was preferenctially grown irrespectrive of deposition temperature and deposition site. Over 50 torr of total pressure however (220) plane was preferentially deposited under 130$0^{\circ}C$ and at inlet site. The surface morphologies of SiC films were uniform at all deposition sites under low pressure but greatly changed with pressure. It shows that a facet structure which was formed above 125$0^{\circ}C$ played an important role in the changed of preferred orientation and surface roughness.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.459-464
• /
• 2000

In order to investigate the effectiveness of an orifice system in producing pressure drops and the effect of compressibility on the Pressure drop, computations using the mass-averaged implicit Wavier-Stokes equations were applied to the axisymmetric pipe flows with the operating pressure ratio from 1.5 to 20.0. The standard k-e turbulence model was employed to close the governing equations. Numerical calculations were carried out for some combinations of the multiple orifice configurations. The present CFD data showed that the orifice systems, which have been applied to incompressible flow regime to date, can not be used for the hint operating Pressure ratio flows. The orifice interval did not strongly affect the total pressure drop but the orifice area ratio more than 2.5 led to high pressure drops. The total pressure drop rapidly increased in the range of the operating pressure ratio from 1.5 to 4.0, but it did not depend on the operating pressure ratio over 4.0.

• Journal of the Korean Society of Physical Medicine
• /
• v.5 no.1
• /
• pp.43-51
• /
• 2010

Purpose : The purpose of this study was to compare plantar pressure distribution between affected side and unaffected side and to analyze plantar pressure distribution of affected side according to the extent of hemineglect in the adult hemiplegia. Methods : Twenty-five hemiplegia participated in this study. The analysis of plantar pressure distribution was conducted by the F-scan system, and the extent of hemineglect was evaluated with line-bisection test. While the subject walked about 10 meters in their comfortable speed the plantar pressure was evaluated and stored. Results : Total contact area, AP CoP trajectory, contact pressure of mid-foot of the affected side were significantly different from the unaffected side. Total contact area, AP CoP trajectory and contact pressure of mid-foot were smaller than those of unaffected side. In the comparison among the group according to the extent of hemineglect, AP CoP trajectory of subject who has severe hemineglect was significantly different from the patient that has no hemineglect and it was shorter than that of no hemineglect. Conclusion : The plantar pressure distribution was generally different between affected side and unaffected side and the hemineglect affected negatively the patient to move CoP forwardly while walking. Accordingly, it will help the clinician to understand the hemineglect which has an effect on abnormal walking and to intervent the hemiplegia who has a neglection to the affected side.

• Journal of Korean Society of Water and Wastewater
• /
• v.20 no.2
• /
• pp.197-206
• /
• 2006

The leakage in the water distribution system means both the loss of money and water resource. To minimize the leakage, we introduced the pressure control method using the pressure reducing valve and pump schedule. For the pressure control, the total leakage is needed to divide into each node. In this study, EPANET 2.0 was used to simulate the water networks in two selected blocks after the total leakage was distributed with each node by four ways. The leakage was allocated into each node as water measured by meter, water pressure, water faucets and Lpcd and simulated by EPANET 2.0. Regardless of the leakage distribution ways, there was no significant difference between the measured water and the estimated water pressure. Thus, the leakage distribution way using water pressures estimated by simulation could be recommended. The scenarios controlling the pressure reducing valve and pump were made in two blocks(A and B). $86,713m^3/year$ leakage in the A block and $11,442m^3/year$ in the B block could be reduced as controlling the pressure reducing valve and pump schedule. It was shown that the fifty million won a year can be saved in the A block and 6.8 million won in the B block.

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.702-707
• /
• 2001

The characteristics of flow in dividing regions are precise, therefore their classification is very important not only in industry but also in hydrodynamics. By now, many studies of flow in dividing regions have been performed, but flow characteristics that use visualization in dividing regions have not been studied. The present study of the PIV and the CFD exhibit average velocity distributions, kinetic energy distributions and total pressure distributions etc of the total flow field due to the development of the accurate visualization optical laser and of optical equipment. Also, PIV is accurate with the flows characteristics of the dividing region as continuous analysis is done using input equipment. The study analyzes average velocity vector field, average kinetic energy, x-axis stress distributions, average and total pressure distributions of dividing regions with flow for visualization of the PIV and the CFD measurement in a dividing rectangular duct.

• Journal of Technologic Dentistry
• /
• v.11 no.1
• /
• pp.89-93
• /
• 1989

The purpose of this study was to evaluate the effect of sprue length and casting pressure on the relative castability of the base metal alloys, commonly used to make porcelain metal restoration. Samples of total 30 were constucted and devided into 6 groups according to three variables (low, medium, high). The total number of complety cast squares were counted, verified and recorded. The results of this 1. main effect of casting pressure was statistically significant.(P<0.05). 2. main effect of sprue length was not statistically significant.

• Physical Therapy Rehabilitation Science
• /
• v.6 no.4
• /
• pp.159-163
• /
• 2017

Objective: Persons with stroke have a tendency to exhibit asymmetric weight-bearing during sit-to-stand because due to the attempt to support themselves with the non-paretic foot. However, there are few devices that can assist with sit-to-stand (STS) performance. This study was designed to investigate the use of the elastic band with rings (EBR) in improving weight-bearing effectively in persons with stroke during STS training. Design: Cross-sectional study. Methods: Thirteen stroke survivors participated in the study. An EBR was applied onto the patient during STS activity. The foot pressure was measured before and after wearing the EBR, with a 5-minute rest period between measurements. Subjects were asked to perform each test twice with and without the EBR. Bilateral feet pressures were measured with standing posture being divided into the forward and backward aspects. The foot contact pressure during STS activity was measured with the CONFORMat System. Results: With EBR, the forward pressure of the affected foot significantly increased while the less-affected forward foot pressure significantly decreased (p=0.015 and p=0.023, respectively). The backward foot pressure did not differ significantly in the two limbs, and there was no difference with and without the EBR in terms of the total pressure of the affected foot. There was a significant difference with and without the EBR in the total pressure of the less-affected foot (p<0.05). Conclusions: STS training with the EBR has been shown to improve weight-bearing of both feet while decreasing the total pressure of the less-affected foot in stroke survivors. Therefore, we suggest that the EBR is a useful tool for STS training for persons with stroke in the clinic.

• Journal of Nutrition and Health
• /
• v.34 no.4
• /
• pp.417-425
• /
• 2001

The purpose of this study was to confirm that regular physical exercise habit and calcium intake play a role in reducing the risk of cardiovascular disease, particularly to confirm that regular exercise is important in reducing serum lipid levels in postmenopausal women. Subjects were classified into regular exercise group(more than 3 times/wk, more than 30 min per exercise) and non-regular exercise group. A convenient frequency method was used to assess the nutritional intake of subjects. Anthropometric measurement such as body weight and height, and blood pressure were measured. There was no significant difference between non-regular exercise group and regular exercise group in energy intake and calcium intake. The total cholesterol and LDL-cholesterol concentrations in non-regular exercise group were significantly higher than those in regular exercise group. There were no significant correlations between age or weight with blood lipids and blood pressure in regular exercise group, while there were significant positive correlations between age or weight with blood lipids and blood pressure in non-regular exercise group. The levels of serum cholesterol, triglyceride, blood pressure and atherogenic index increased with age in non-regular exercise women. The blood pressure in low total Ca intake/plant Ca intake ratio group was significantly higher than that in high total Ca intake/plant Ca intake ratio group. There was a highly significant positive correlation between Ca intake and HDL-cholesterol in non-regular exercise women. And, there was a highly significant negative correlation between Ca intake and blood pressure in regular exercise women. The results suggest that increased habitual physical activity and calcium intake should be recommended by way of decreasing blood lipids and blood pressure in postmenopausal women. (Korean J Nutrition 34(4) : 417∼425, 2001)

• Journal of the Korea Organic Resources Recycling Association
• /
• v.23 no.4
• /
• pp.52-62
• /
• 2015

This study estimated the contribution rates of inlet air flow, moisture content, air-filled porosity and particle size on the total pressure drop for the sawdust used as the bulking agent in the composting. The statistical model for pressure drop including the affecting factors was proposed.($R^2=0.998{\sim}0.950$) While the laminar air flow(v) and particle size(SIZE*v) had the positive relations to the total pressure drop, the turbulent air flow($v^2$), moisture content(MC*v) and air-filled porosity(AFP*v) had the negative relations. Total pressure drop sharply increased with increasing of the inlet air flow. And the most significant factors affecting to total pressure drop were the particle size(SIZE*v) as positive factor and air-filled porosity(AFP*v) as negative factor. The contribution rate to total pressure drop by the particle size(SIZE*v) was continuously increased with increasing of the inlet air flow, but the contribution rate by air-filled porosity(AFP*v) was decreased. And total pressure drop was little changed even though the increasing of moisture content above the range of dry moisture content 0.25. The contribution rates of affecting factors had the different tendencies with increasing of the moisture content, especially in the negative factors as air-filled porosity(AFP*v) and moisture content(MC*v). For effective composting process, it is preferable to select the sawdust with higher air-filled porosity as bulking agent to enhance the air permeability.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.10
• /
• pp.1619-1626
• /
• 2014

This study was conducted to evaluate the effects of Joule heating and hydrostatic pressure on reduction of total aerobes and spores of Bacillus cereus in four kinds of sauces prepared with traditional Korean fermented foods. Total aerobes and inoculated spores of B. cereus in sauces were assayed after treatment or during storage at $30^{\circ}C$ after 4 or 8 weeks. Joule heating ($85^{\circ}C$), hydrostatic pressure (550 Mpa, 5 min), and antimicrobial additive (3% ethanol) were separately applied or combined as a hurdle technique. A 1.0~2.0 log reduction in total aerobes of Doenjang and Gochujang sauce was observed upon Joule heating at 80, 85, and $95^{\circ}C$. Significant reductions (0.92~1.21 log/0.5~1.38 log and 1.26~1.7 log/0.47~3.45 log) of total aerobes/spores of B. cereus in Doenjang and Gochujang sauce, respectively, occurred upon JA (Joule+additive), JP (Joule+hydrostatic pressure) or JAP (Joule+additive+ hydrostatic pressure). Effects of each treatments were maintained or increased during storage for 8 weeks at $30^{\circ}C$, suggesting that total aerobes and spores of B. cereus in Doenjang and Gochujang sauce can be controlled through Joule heating or hydrostatic pressure treatment.