• 한국식품저장유통학회지
• /
• 제12권6호
• /
• pp.608-612
• /
• 2005

친환경적이면서 신속한 비파괴 분석방법인 FT-NIR를 이용하여 백미의 총식이섬유(TDF)함량 예측모델을 개발하였다. 백미는 국내산으로 전남지방에서 재배된 47개 품종과, 시중 유통 중인 13개 브랜드 미에 대해서 AOAC 방법에 준한 효소법에 의해 TDF 함량을 분석하였다. 습식 분석된 TDF함량의 범위는 $1.17-1.92\%$ 이었다. FT-NIR로 측정된 스펙트럼의 검량식은 빛의 산란 효과를 최소화하기 위해 수학적 처리를 하였고, 몇 개의 특정 파장이 아닌 전 파장 영역(1,000-2,500 nm)에 대해서 PLS법으로 작성하였다. 얻어진 검량식의 정확도는 상관계수(r), SEE 및 SEP로 확인하였다. 백미 중 총 식이섬유 함량에 대한 회귀분석을 행한 결과, 검량식의 r은 0.9705, SEE는 0.0464, 검증식의 bias는 -0.0006, SEP가0.0604로 측정 정확도가 우수하여 실제 적용이 가능함을 보여주었다.

• 한국연초학회지
• /
• 제35권1호
• /
• pp.1-6
• /
• 2013

Near InfraRed Spectroscopy(NIRS) is a quick and accurate analytical method to measure multiple components in tobacco manufacturing process. This study was carried out to develop calibration equation of near infrared spectroscopy for the prediction of the amount of chemical components and hot water solubles(HWS) of reconstituted tobacco leaf. Calibration samples of reconstituted tobacco leaf were collected from every lot produced during one year. The calibration equation was formulated as modified partial least square regression method (MPLS) by analyzing laboratory actual values and mathematically pre-treated spectra. The accuracy of the acquired equation was confirmed with the standard error of prediction(SEP) of chemical components in reconstituted tobacco leaf samples, indicated as coefficient of determination($R^2$) and prediction error of sample unacquainted, followed by the verification of model equation of laboratory actual values and these predicted results. As a result of monitoring, the standard error of prediction(SEP) were 0.25 % for total sugar, 0.03 % for nicotine, 0.03 % for chlorine, 0.16 % for nitrate, and 0.38 % for hot water solubles. The coefficient of determination($R^2$) were 0.98 for total sugar, 0.97 for nicotine, 0.96 for chlorine, 0.98 for nitrate and 0.92 for hot water solubles. Therefore, the NIRS calibration equation can be applicable and reliable for determination of chemical components of reconstituted tobacco leaf, and NIRS analytical method could be used as a rapid and accurate quality control method.

• Journal of Biosystems Engineering
• /
• 제33권4호
• /
• pp.260-268
• /
• 2008

Optical diffuse reflectance sensing has potential for rapid and reliable on-site estimation of soil properties. For good results, proper calibration to measured soil properties is required. One issue is whether it is necessary to develop calibrations using samples from the specific area or areas (e.g., field, soil series) in which the sensor will be applied, or whether a general "factory" calibration is sufficient. A further question is if specific calibration is required, how many sample points are needed. In this study, these issues were addressed using data from 42 paddy fields representing 14 distinct soil series accounting for 74% of the total Korean paddy field area. Partial least squares (PLS) regression was used to develop calibrations between soil properties and reflectance spectra. Model evaluation was based on coefficient of determination ($R^2$) root mean square error of prediction (RMSEP), and RPD, the ratio of standard deviation to RMSEP. When sample data from a soil series were included in the calibration stage (full information calibration), RPD values of prediction models were increased by 0.03 to 3.32, compared with results from calibration models not including data from the test soil series (calibration without site-specific information). Higher $R^2$ values were also obtained in most cases. Including some samples from the test soil series (hybrid calibration) generally increased RPD rapidly up to a certain number of sample points. A large portion of the potential improvement could be obtained by adding about 8 to 22 points, depending on the soil properties to be estimated, where the numbers were 10 to 18 for pH, 18-22 for EC, and 8 to 22 for total C. These results provide guidance on sampling and calibration requirements for NIR soil property estimation.

• 농업과학연구
• /
• 제41권1호
• /
• pp.59-63
• /
• 2014

Precision farming aims at reduced environmental impacts with increased productivity. Soils are multi-functional media in which air, water and biota occur together and form an essential part of the landscape with a fundamental role in the environment. The requirement for herbicides and fertilizers can vary within a field in response to spatial differences in soil properties. Near infrared (NIR) spectroscopy is widely used today as a nondestructive analytical technique which is capable of determining a number of physio-chemical parameters. The objectives of this study were to develop optimal models to predict chemical properties of paddy soils by visible and NIR reflectance spectra. Total of 60 soil samples were collected in spring from 20 paddy fields within central regions in Korea. Reflectance spectra, moisture contents, pH, total nitrogen (N), organic matter, available phosphate ($P_2O_5$) of soil samples were measured. The reflectance spectra were measured in wavelength ranges of 400-2,500 nm with 2 nm interval. The method of partial least square (PLS) analysis was used to determine the soil properties. The PLS analyses showed good correlation between predicted and measured chemical properties of paddy soils in the wavelength range of 1,800-2,400 nm. Especially, it showed better performance than the previous results which used the entire wavelength range of the spectrophotometer, without considering the optimal wavelength of each soil properties.

• 대한교통학회지
• /
• 제33권1호
• /
• pp.61-69
• /
• 2015

이 연구에서는 국내 총 화물물동량에 대한 5개 계량경제모형들의 예측정확도를 비교한다. 적용된 5개 모형은 통상최소자승모형, 부분조정모형, 축소된 자기회귀분포시차모형, 벡터자기회귀 모형, 시간변동계수모형이다. 모형의 추정과 예측은 1970-2011년 동안의 연간 국내 화물물동량 자료와 광공업생산지수를 이용하여 수행되었다. 5개 모형은 반복적인 예측방법을 이용하여 1년 후, 3년 후, 5년 후 예측성능이 비교되었다. 추가적으로 장래변동성의 크기에 따라 두 예측기간으로 나누어 예측정확도를 비교하였고, 결과적으로 시간변동계수모형은 변동을 갖는 예측기간에 대해서 가장 높은 정확도를, 반면에 벡터자기회귀 모형은 점진적인 변화를 갖는 예측기간에 대해서 다른 모형에 비해 우수한 성능을 보여주는 것으로 분석되었다.

• 지식경영연구
• /
• 제16권1호
• /
• pp.209-224
• /
• 2015

Previous studies provided that limiting the number of services provided in hospital had influences in decreasing cost in delivering medical services. Hospitals could have positive effects on their profit by concentrating small number of services which they have comparative advantages. This study purposed to analyze the relationship between the concentration status of hospitals and medical charge for inpatients. National Inpatient sample data provided by the Health Insurance Review and Assessment Service (HIRA) for three years, 2009 to 2011 was used to compute the three concentration indices (Information Theory Index (ITI), Internal Herfindahl Index (IHI), and number of distinct Diagnosis-Related Groups (DRGs) treated) and total medical charge per inpatient case in each year. It was also used to select the control variables such as bed size, number of doctors per 100 beds, and locations. The ordinary least square regression models were developed and tested for hospital and general hospitals separately. The results showed that the total medical charge per inpatient case was significantly differed depending on the concentration indices, and there were positive relationships in ITI and IHI. The number of distinct DRGs had different directions in regression coefficients depending on the locations and hospital types. Hospitals had larger absolute standardized regression coefficients compare to those of general hospitals. However, their effects could be varied by the hospital types, number of doctors, and locations. It seems that hospitals have more influences on medical charges by concentrating their services than general hospitals. Study results provide knowledges to hospital administrators that concentration strategy can positive influences on the performance of small size hospitals.

• Journal of Crop Science and Biotechnology
• /
• 제10권3호
• /
• pp.185-192
• /
• 2007

Near-infrared spectroscopy(NIRS) was used to develop a rapid and efficient method to determine lignan glucosides in intact seeds of sesame(Sesamum indicum L.) germplasm accessions in Korea. A total of 93 samples(about 2 g of intact seeds) were scanned in the reflectance mode of a scanning monochromator, and the reference values for lignan glucosides contents were measured by high performance liquid chromatography. Calibration equations for sesaminol triglucoside, sesaminol($1{\rightarrow}2$) diglucoside, sesamolinol diglucoside, sesaminol($1{\rightarrow}6$) diglucoside, and total amount of lignan glucosides were developed using modified partial least square regression with internal cross validation(n=63), which exhibited lower SECV(standard errors of cross-validation), higher $R^2$(coefficient of determination in calibration), and higher 1-VR(ratio of unexplained variance divided by variance) values. Prediction of an external validation set(n=30) showed a significant correlation between reference values and NIRS estimated values based on the SEP(standard error of prediction), $r^2$(coefficient of determination in prediction), and the ratio of standard deviation(SD) of reference data to SEP, as factors used to evaluate the accuracy of equations. The models for each glucoside content had relatively higher values of SD/SEP(C) and $r^2$(more than 2.0 and 0.80, respectively), thereby characterizing those equations as having good quantitative information, while those of sesaminol($1{\rightarrow}2$) diglucoside showing a minor quantity had the lowest SD/SEP(C) and $r^2$ values(1.7 and 0.74, respectively), indicating a poor correlation between reference values and NIRS estimated values. The results indicated that NIRS could be used to rapidly determine lignan glucosides content in sesame seeds in the breeding programs for high quality sesame varieties.

• 한국연초학회지
• /
• 제20권2호
• /
• pp.191-197
• /
• 1998

Discriminant analysis using near infrared spectra derived from Korean Flue-cured(KF) and American Flue-cured(AF), and also Korean Burley(KB) and American Burley(AB) tobacco was done to classify flue-cured and burley tobacco as either grown in Korea or grown in the USA. Samples were scanned in the wavelength of 400 ～ 2500 nm by near infrared analyzer(NIRSystem Co., model 6500). The discrimination equations for flue-cured and burley tobacco were developed using partial least square 2 method in Infrasoft International NIRS 3 software package. KF samples used for the development of the discrimination equations were higher contents of total sugar, crude ash and chlorine, and higher value of leaf density and brightness, but lower contents of nicotine, total nitrogen and ether extracts, and higher value of redness than those of AF samples. KB samples were higher contents of nicotine, crude ash and chlorine, but lower contents of ether extracts and value of brightness than those of AB samples. On 3 dimensional graph drawn with 3 principal component scores calculated with 3 principal component from KF and KB sample spectra, KF sample spectra were significantly different from AF, and also KB sample spectra were significantly different from AB. The discrimination equations of flue-cured and burley were developed with 3 principal component, respectively. The discrimination equations for flue-cured and burley had a standard error of 0.03 and 0.04, and a R2 of 0.88 and 0.84, respectively. The tobacco samples used for the development of discrimination equation were perfectly classified as KF and AF by flue-cured discrimination equation, and also perfectly classified KB and AB by burley discrimination equation, respectively. The correct classification rates of KF and AF samples not used for the development of discrimination equations were 9S % (828 out of 869 samples) and 98 % (98 out of 100 samples) by flue-cured discrimination equations, and KB and AB samples were 94%(345 out of 368 samples) and 100%(42 out of 42 samples) by burley discrimination equations, respectively.

• 한국대기환경학회지
• /
• 제21권1호
• /
• pp.131-140
• /
• 2005

To investigate secondary carbonaceous species within PM$_{10}$ and PM$_{2.5}$ in Seoul urban Metropolitan Area (SMA), Korea. atmospheric particulate matters samples were collected at two sites of SMA at UOS (The University Of Seoul station) sites and IHU (InHa University of Incheon station) during the period of 4 to 14 January and 12 to 22 May, 11 to 15 August 2004, and their characteristics were qualitatively discussed. during January and May and August of 2004. Daily average mass concentration 0.095 mg/㎥ in PM$_{10}$ and 0.053 mg/㎥ in PM$_{2.5}$ for mass respectively. were observed in SMA. The concentrations of carbonaceous species contributed 18.4% and 16.4% of PM$_{2.5}$ and PM$_{10}$ during the sampling period, respectively, of which OC accounted for 68% and 52% more of the total carbon (TC). OC and EC concentrations and their mass percentages were higher in PM$_{2.5}$ than in PM$_{10}$ which could be attributed to generation process. Organic aerosols would constitute up to 38% of PM$_{2.5}$ based on the evaluation of 1.6 for the ratio of OC to organic particulate. Secondary organic carbon (SOC) were estimated to be more than 13% and up to 68% of total OC based on the minimum OC/EC ratio of 1.06/1.11 using least square method. Comparisons of OC and EC with trace elements. As results of carbonaceous species analysis, the dominant factor in view of fine particle (PM$_{10}$/PM$_{2.5}$) is primary emission source such as mobile, fossil fuel combustion etc. during winter time in SMA. But in summer periods, remarkable fine particle increasing factor was secondary organic carbon dependent to photochemical reaction. reaction.n. reaction.

• 설비공학논문집
• /
• 제28권9호
• /
• pp.355-360
• /
• 2016

Continuing to the modeling of heating load, this paper, as the second part of consecutive works, presents LS-SVM (least square support vector machine) based model of winter time apartment hot water supply load in a district heating system, so as to be used in prediction of heating energy usage. Similar, but more severely, to heating load, hot water supply load varies in highly nonlinear manner. Such nonlinearity makes analytical model of it hardly exist in the literatures. LS-SVM is known as a good modeling tool for the system, especially for the nonlinear system depended by many independent factors. We collect 26,208 data of hot water supply load over a 13-week period in winter time, from 12 heat exchangers in seven different apartments. Then part of the collected data were used to construct LS-SVM based model and the rest of those were used to test the formed model accuracy. In modeling, we first constructed the model of district heating system's hot water supply load, using the unit heating area's hot water supply load of seven apartments. Such model will be used to estimate the total hot water supply load of which the district heating system needs to provide. Then the individual apartment hot water supply load model is also formed, which can be used to predict and to control the energy consumption of the individual apartment. The results obtained show that the total hot water supply load, which will be provided by the district heating system in winter time, can be predicted within 10% in MAPE (mean absolute percentage error). Also the individual apartment models can predict the individual apartment energy consumption for hot water supply load within 10% ~ 20% in MAPE.