• 한국가시화정보학회지
• /
• 제8권1호
• /
• pp.31-38
• /
• 2010

An experimental study to evaluate dynamic structures of flow and turbulence characteristics in bubble-driven liquid flow in a rectangular tank with a varying flow rate of compressed air is conducted. Liquid flow fields are measured by time-resolved particle image velocimetry (PIV) with fluorescent tracer particles to eliminate diffused reflections, and by an image intensifier to acquire enhanced clean particle images. Instantaneous vector fields are investigated by using the two frame cross-correlation function and bad vectors are eliminated by magnitude difference technique. By proper orthogonal decomposition (POD) analysis, the energy distributions of spatial and temporal modes are acquired. When Reynolds number increases, bubble-induced turbulent motion becomes dominant rather than the recirculating flow near the side wall. The total kinetic energy transferred to the liquid from the rising bubbles shows a nonlinear relation regarding the energy input because of the interaction between bubbles and free surface.

• 한국의류산업학회지
• /
• 제19권2호
• /
• pp.221-229
• /
• 2017

This study researched the needs of smart fashion items using energy harvesting for outdoor wearers and surveyed the application areas and design preferences for energy-harvesting systems based on outdoor activities. A total of 217 subjects were surveyed. Subjects who had at least 3 years of experience in outdoor activities were selected in order to increase the reliability of the research results. The survey investigated lifestyles based on outdoor activities, outdoor clothing and electronic equipment usage, purchase style, utilization plan, and design preference for energy-harvesting clothing and supplies. The results showed that 62.7% of the respondents had experience in outdoor activities for more than five years. 96.3% of the subjects carried electronic equipment, and 179 participants(82.5%) experienced discomfort due to battery consumption/dead batteries during outdoor activities. 78.4% were interested in smat fashion items using energy-harvesting technology, and the energy-conversion technology that was useful for outdoor activities was "kinetic energy"(74.7%). Participants showed a high preference for a detachable type(30.9%) and a city type(69.1%) that can be worn in outdoor activities as well as in general life. The preferred location of the electric power-charging device was the "Hem area of top garment"(35.9%), and the reason for this selection was that it was easy to operate and did not interfere with movement. The data from this paper can be used as a basis for product planning and product design for energy-harvesting apparel designers and supply developers for outdoor clothing.

• Nuclear Engineering and Technology
• /
• 제55권11호
• /
• pp.3940-3955
• /
• 2023

A new method of numerical simulating prediction and decontamination effect evaluation for abrasive jet decontamination to radioactively contaminated metal is proposed. Based on the Computational Fluid Dynamics and Discrete Element Model (CFD-DEM) coupled simulation model, the motion patterns and distribution of abrasives can be predicted, and the decontamination effect can be evaluated by image processing and recognition technology. The impact of three key parameters (impact distance, inlet pressure, abrasive mass flow rate) on the decontamination effect is revealed. Moreover, here are experiments of reliability verification to decontamination effect and numerical simulation methods that has been conducted. The results show that: ⁶⁰Co and other homogeneous solid solution radioactive pollutants can be removed by abrasive jet, and the average removal rate of Co exceeds 80%. It is reliable for the proposed numerical simulation and evaluation method because of the well goodness of fit between predicted value and actual values: The predicted values and actual values of the abrasive distribution diameter are Ф57 and Ф55; the total coverage rate is 26.42% and 23.50%; the average impact velocity is 81.73 m/s and 78.00 m/s. Further analysis shows that the impact distance has a significant impact on the distribution of abrasive particles on the target surface, the coverage rate of the core area increases at first, and then decreases with the increase of the impact distance of the nozzle, which reach a maximum of 14.44% at 300 mm. It is recommended to set the impact distance around 300 mm, because at this time the core area coverage of the abrasive is the largest and the impact velocity is stable at the highest speed of 81.94 m/s. The impact of the nozzle inlet pressure on the decontamination effect mainly affects the impact kinetic energy of the abrasive and has little impact on the distribution. The greater the inlet pressure, the greater the impact kinetic energy, and the stronger the decontamination ability of the abrasive. But in return, the energy consumption is higher, too. For the decontamination of radioactively contaminated metals, it is recommended to set the inlet pressure of the nozzle at around 0.6 MPa. Because most of the Co elements can be removed under this pressure. Increasing the mass and flow of abrasives appropriately can enhance the decontamination effectiveness. The total mass of abrasives per unit decontamination area is suggested to be 50 g because the core area coverage rate of the abrasive is relatively large under this condition; and the nozzle wear extent is acceptable.

• 한국전자통신학회논문지
• /
• 제7권5호
• /
• pp.1079-1085
• /
• 2012

현재 전 세계의 많은 과학자들이 지속 가능한 에너지원을 찾기 위하여 많은 노력을 하고 있지만, 태양광에너지가 궁극적인 해답이 될 것으로 받아들여지고 있다. 이러한 광 에너지는 조명용, 발열용, 통신용 등으로 사용될 수 있으며, 심지어 최근에는 광에너지로 동작하는 광자구동 모터에 대한 연구결과도 나오고 있다. 본 논문에서는 이러한 광에너지를 광섬유를 통해 전송할 수 있는 기술에 대해 이론적인 분석을 수행하였다. 특히, 한 가닥의 광섬유에 여러 개의 코어(core)가 삽입된 멀티코어(multi-core) 광섬유를 이용한 광에너지 전송의 에너지 전송량에 대해 예측해 보았다. 본 논문의 분석 결과에 따르면, 한 가닥의 멀티코어 광섬유로 약 2 kW 의 광에너지 전송이 가능할 것으로 예측되었으며, 초고압선처럼 수 cm 의 직경으로 광섬유 다발을 묶을 경우에는 10 MW 이상의 광에너지 전송이 가능할 것으로 예측되었다. 이는 도체 전력선과 비교하여 절반수준의 에너지 전송량으로 충분한 경쟁력이 있을 것으로 생각된다.

• Korean Membrane Journal
• /
• 제5권1호
• /
• pp.43-53
• /
• 2003

The selectivity of a gas in the carbon molecular sieve membrane (CMSM) can be expressed as the ratio of the product of the diffusivity and the solubility of two different gases. The diffusivity is also expressed as the product of the entropy and the total energy (kinetic and potential energy) in the nano-sized pore of the membrane. The present study calculates the entropic-energy and selectivity of penetrant gases such as H$_2$, O$_2$, N$_2$, and CO$_2$ from the gas-in-a box theory to physically analyze the diffusivity of penetrant gas in slit-shaped pore of CMSM focusing on the restriction of gas motion based on the size difference between penetrant gas pairs. The contribution of each energy term is converted to entropic term separately. By the conjugated calculation for each entropic-energy, the entropic effects on diffusivity-selectivity for gas pairs such as H$_2$/N$_2$, CO$_2$/N$_2$, and O$_2$/N$_2$ were analyzed within active pore of CMSM. In the activated diffusion domain, the calculated value of entropic-selectivity lies between 9.25 and 111.6 for H$_2$/N$_2$, between 3.36 and 6.0 for CO$_2$/N$_2$, and between 1.25 and 16.94 for O$_2$/N$_2$, respectively. The size decrement of active pore in CMSM had the direct effect on the reduction of translational entropic-energy and the contribution of vibrational entropic-energy for N$_2$, O$_2$, and H$_2$ was almost negligible. However, the vibrational entropic term of CO$_2$ might extravagantly affect on the entropic-selectivity.

• 한국운동역학회지
• /
• 제27권3호
• /
• pp.189-195
• /
• 2017

Objective: The aim of this study was to examine the effect of foot landing type (forefoot vs. rearfoot landing) on kinematics, kinetics, and energy absorption of hip, knee, and ankle joints. Method: Twenty-five healthy men performed single-leg landings with two different foot landing types: forefoot and rearfoot landing. A motion-capture system equipped with eight infrared cameras and a synchronized force plate embedded in the floor was used. Three-dimensional kinematic and kinetic parameters were compared using paired two-tailed Student's t-tests at a significance level of .05. Results: On initial contact, a greater knee flexion angle was shown during rearfoot landing (p < .001), but the lower knee flexion angle was found at peak vertical ground reaction force (GRF) (p < .001). On initial contact, ankles showed plantarflexion, inversion, and external rotation during forefoot landing, while dorsiflexion, eversion, and internal rotation were shown during rearfoot landing (p < .001, all). At peak vertical GRF, the knee extension moment and ankle plantarflexion moment were lower in rearfoot landing than in forefoot landing (p = .003 and p < .001, respectively). From initial contact to peak vertical GRF, the negative work of the hip, knee, and ankle joint was significantly reduced during rearfoot landing (p < .001, all). The contribution to the total work of the ankle joint was the greatest during forefoot landing, whereas the contribution to the total work of the hip joint was the greatest during rearfoot landing. Conclusion: These results suggest that the energy absorption strategy was changed during rearfoot landing compared with forefoot landing according to lower-extremity joint kinematics and kinetics.

• 한방비만학회지
• /
• 제2권1호
• /
• pp.95-104
• /
• 2002

Objects. There was an increase in obese population due to eating habits resulted in modernization of lifestyle and the change of the tendency to conduct the physical activity, in order words, the reduction in the range of kinetic energy. Obesity is viewed as a major risk factor for serious health problems, including heart disease, high blood pressure, stroke, diabetes, and certain forms of cancer as well as for psychological and social problems owing to our fat-phobic society. In the present study, we investigate the weight loss thanks to giving Handayulso-tang(HD) medication of Taeum-in to induced obesity rats and its effects on lipid metabolism, given that their behavior patterns are changed according to their constitution. Methods: The extracts of Handayulso-tang was orally administered to the rats of HD group 200mg/200g of rats weight every day for 6 weeks, and the control group were fed with equal amount of saline. And measured the body weight and total cholesterol, triglyceride, free fatty acid and total lipid contents in serum in obese rats. Results: 1. The body weight in HD group were decreased. 2. The contents of serum total cholesterol and triglyceride in HD group were decreased and statistically showed the significant difference compared with the control group. 3. The contents of serum free fatty acid and total lipid in HD group were decreased, but did not statistically show the significant difference compared with the control group. Conclusion: Based on the above results, we know that Handayulso-tang have effects on the decrease of the body weight and the contents of serum total cholesterol, triglyceride, free fatty acid and total lipid So it could be concluded that Handayulso-tang can help the treatment of obesity.

• 전기의세계
• /
• 제25권5호
• /
• pp.79-87
• /
• 1976

This paper is to investigate the A.C generation of MHD engine, converting directly the kinetic energy of conductive gas in high temperature to electric power by the effect of magnetic field. It is known that there are at least two kinds of method in A.C MHD power generation; one, by sending stationary plasma flow in an alternating or rotating magnetic field and the other, by transmission of pulse type plasma flow in uniform and constant magnetic field, former method is adopted here. In order to raise the total efficiency of close cycle in combination with nuclear power and MHD genertaion, an argon plasma jet is utilized as heat source, which is not mixed with the seed material, and the design data are obtained for A.C MHD generation in small capacity, but induced voltage and power output have the maximum values, 15 voltages and 7.5W respectively due to plasma flow with low conductivity and weak magnetic field.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권1호
• /
• pp.127-133
• /
• 2000

A numerical study of the flow of incompressible fluid in a polar cavity is presented. Irregular grids is proposed by applying the interior division principle to the variables on polar coordinate grid formation. Stability analysis and the pressure correction method of SOLA algorithms were discussed in detail on cylindrical coordinates. The results present that unsteady flow behavior appears over $Re=3{\times}10^4$ on polar cavities but nearly steady state at $Re=10^4$. Furthermore, with increasing Reynolds numbers, vortices behaviors indicate more complicated flow phenomena and more severe temporal fluctuation of total kinetic energy and time variation of velocity components at arbitrary pick-up points are detected in case of $Re=5{\times}10^4$.

• 한국환경과학회지
• /
• 제21권2호
• /
• pp.203-215
• /
• 2012

In order to clarify the impacts of thermal difference in atmospheric boundary layer due to the different sophistication of building information in Busan metropolitan areas, several numerical simulations were carried out. ACM (Albedo Calculation Model) and WRF (Weather Research and Forecasting) was applied for estimating albedo and meteorological elements in urban area, respectively. In comparison with coarse aggregated and small buildings, diurnal variation of albedo is highly frequent and its total value tend to be smaller in densely aggregated and tall buildings. Estimated TKE and sensible heat flux with sophisticatedly urban building parameterization is more resonable and valid values are mainly induced by urban building sophistication. The simulation results suggest that decreased albedo and increased roughness due to skyscraper plays an important role in the result of thermal change in atmospheric boundary layer.