• 대한치과의사협회지
• /
• 제57권11호
• /
• pp.672-678
• /
• 2019

AIM: The purpose of this study was to evaluate and compare the torsional fracture resistances, cyclic fatigue resistance, and bending stiffness of two nickel-titanium (NiTi) rotary instruments made of different heat-treated alloy: Aurum Blue (heat-treated) and Aurum Pro (conventional). Methods: Forty-five Aurum Blue and Aurum Pro NiTi files were selected for the three mechanical tests (n=15). For the torsional resistance test, 3 mm file tip was fixed and the shaft was driven clockwise at 2 rpm until fracture occurred by using a customized device. Cyclic fatigue resistance was evaluated by rotating instruments in artificial canal with dynamic mode. Bending stiffness was tested by observation of the bending moment on attaining a 45° bend. The results were analyzed by student-t tests at a significance level of 95%. The fractured surface of each groups were examined under a scanning electron microscope (SEM). Results: Aurum Blue showed significantly higher toughness, ultimate strength, distortion angle, and number of cycles to failure than those of Aurum Pro (p < 0.05). However, Aurum Blue and Aurum Pro did not differ significantly in terms of bending stiffness. SEM showed typical topographic appearances of the cyclic fatigue and torsional fracture. Conclusions: Under the limitations of this study, heat-treated instruments showed higher flexibility and fracture resistances than conventional NiTi instruments.

• 한국지진공학회논문집
• /
• 제12권5호
• /
• pp.1-10
• /
• 2008

Taft N21E 지진파를 사용하여 1:12 축소된 모델로 여러번의 진동대 실험을 저층부 2개층에 비틀림과 연층을 가지는 17층 고층 철근콘크리트 건물에 대해 지진 거동을 조사하기 위해 수행했었다. 이 거동의 주요 특징은 (1) 연약 골조가 거대한 비탄성 변형을 받은 후 변형이나 비틀림에서 비틀림 모드까지 현저한 진동의 갑작스런 변화, (2) 이러한 모드 변화에 따른 비틀림 강성의 갑작스런 증가, (3) 비틀림 모드에서 월의 요곡(warping) 거동, 그리고 (4) 진동대 거동의 반대 방향에만 생기는 전도모멘트 양상을 보여주었다. 본 연구에서는 이러한 성과를 Perform3D라는 비선형 해석 프로그램을 사용하여 위 특성을 모사하기 위해 노력하였다. 이 소프트웨어에서 가용한 비선형 모델과 함께 그의 장점과 단점을 해석 및 실험 결과의 비교를 통해 제시하였다.

• 한국산학기술학회논문지
• /
• 제10권8호
• /
• pp.2038-2043
• /
• 2009

본 연구는 유한요소해석을 이용하여 순수 휨이 작용하는 T형 단면보의 탄성 횡-비틀림 좌굴강도에 대해 기술하고 있다. 유한요소해석을 통해 얻어진 결과는 AISC-LRFD(2007)설계기준과 비교되었으며, 검토결과 AISC-LRFD 제안식을 이용하여 얻어지는 값들이 유한요소해석 결과보다 큰 값을 나타내고 있어 안전측 설계를 유도하고 있지 못하고 있다. 이에 본 연구에서는 수정된 설계 계산식을 제안하고 예제를 통해 활용성을 검토하였다. 새로운 설계 계산식은 T형보의 횡-비틀림 좌굴강도 산정에 쉽게 적용될 수 있으며, 다양한 하중이 작용하는 경우 T형보의 연구에 적극 활용 될 수 있을 것이다.

• 대한토목학회논문집
• /
• 제31권3A호
• /
• pp.153-162
• /
• 2011

복부 파형강판을 갖는 복합교량은 기존 PSC 박스 거더의 콘크리트 복부판을 파형강판으로 대체함으로써 상부구조의 경량화를 유도하고 프리스트레싱 효율성을 향상시킬 수 있어 국외에서 널리 이용되고 있다. 하지만 이러한 장점에도 불구하고 복부 파형강판을 갖는 복합교량은 기존 연구가 거더의 전단과 휨 거동에 국한되어 있어 비틀림 거동에 대한 이해는 부족한 상황이다. 국내외의 연구자들에 의하여 복부 파형강판을 갖는 복합교량의 비선형 해석 방법이 개발되었으나, 이러한 연구는 콘크리트의 인장 강도를 무시하여 균열 모멘트 및 비틀림 강성과 같은 콘크리트 교량의 사용성에 영향을 미치는 요소들에 대한 이해가 부족한 실정이다. 본 논문에서는 콘크리트의 인장 거동을 고려한 복부 파형강판을 갖는 복합교량의 비선형 비틀림 거동 해석 방법에 대한 연구를 수행하였다. 제안된 이론을 적용하여 해석 프로그램을 제작하였으며, 실험 연구를 통하여 개발된 해석 방법의 타당성을 검증하였다. 마지막으로 변수 해석을 실시하여 콘크리트의 인장 강도가 비틀림 거동에 미치는 영향을 분석하였다.

• Structural Engineering and Mechanics
• /
• 제16권5호
• /
• pp.613-625
• /
• 2003

This paper presents the lateral-torsional buckling (LTB) of beams or girders with continuous lateral support at top flange. Traditional moment gradient factors ($C_b$) given by AISC in LRFD Specification for Structural Steel Buildings and by AASHTO in LRFD Bridge Design Specifications were reviewed. Finite-element method buckling analyses of doubly symmetric I-shaped beams with continuous top bracing were conducted to develop new moment gradient factors. A uniformly distributed load was applied at midheight and either or both end moments were applied at the ends of beams. The proposed solutions are simple and accurate for use by engineers to determine the LTB resistance of beams.

• Structural Engineering and Mechanics
• /
• 제49권2호
• /
• pp.147-161
• /
• 2014

In this paper a nonlinear finite element analysis model is established for cold-formed steel zed-section purlins subjected to uplift loading. In the model, the lateral and rotational restraints provided by the sheeting to the purlin are simplified as a lateral rigid restraint imposed at the upper flange-web junction and a rotational spring restraint applied at the mid of the upper flange where the sheeting is fixed. The analyses are performed by considering both geometrical and material nonlinearities. The influences of the rotational spring stiffness and initial geometrical imperfections on the uplift loading capacity of the purlin are investigated numerically. It is found that the rotational spring stiffness has significant influence on the purlin performance. However, the influence of the initial geometric imperfections on the purlin performance is found only in purlins of medium or long length with no or low rotational spring stiffness.

• 대한기계학회논문집A
• /
• 제28권12호
• /
• pp.1906-1913
• /
• 2004

A new method has been proposed for the calibration of frictional forces in atomic force microscopy. Angle conversion factor is defined using the relationship between torsional angle and frictional signal. Once the factor is obtained from a cantilever, it can be applied to other cantilevers without additional experiments. Moment balance equations on the flat surface and top edge of a commercial step grating are used to obtain angle conversion factor. Proposed method is verified through another step grating test and frictional behavior of Mica.

• 대한기계학회논문집A
• /
• 제24권2호
• /
• pp.403-410
• /
• 2000

The effects of various factors were studied on the process of a steel cord by twisting wires. To remove residual twisting moment after the steel cord process, the twisting angles of residual elasti c twisting and overtwisting were measured and compared with finite element results. The agreement between experimental data and finite element calculations was good for the angles of residual elastic twisting and over-twisting. The stress distributions in a steel cord under complex loading conditions were also obtained by using the finite element analysis.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.846-851
• /
• 2004

A new method has been proposed for the calibration of frictional forces in atomic force microscopy. Angle conversion factor is defined using the relationship between torsional angle and frictional signal. Once the factor is obtained from a cantilever, it can be applied to other cantilevers without additional experiments. Moment balance equations on the flat surface and top edge of a commercial step grating are used to obtain angle conversion factor. Proposed method is verified through another step grating test and frictional behavior of Mica.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.1042-1048
• /
• 2007

This work analytically investigated the radiated noise of a helical gear-housing system due to the excitation of helical gears. The helical gears were modeled as a 12-degree of freedom mass-spring-damper system; the shaft was modeled as a rod, a beam, and a torsional shaft; and the gear housing was modeled as a clamped circular plate with viscous damping. The modeling of this system used transfer matrices for helical gears, shafts, and bearings. Damping for both the bearings and the plate were obtained by modal testing. For the evaluation of noise, sound pressure from the plate due to the force and the moment in both radial and tangential directions was analytically derived by the Rayleigh integral. The analytical derivation and parameters from the experiment were applied to an analysis of noise for the two sets of helical gears with differing gear ratios. The analysis showed that the moment excitation in both helical gears contributed more to the noise of the plate than axial force excitation.