1 |
Li, L.Y., Ren, C. and Yang, J. (2012), "Theoretical analysis of partially restrained zed-purlin beams subjected to up-lift loads", J Constr. Steel Res., 70 , 273-279.
DOI
|
2 |
Lucas, R.M., Al-Bermani, G.A. and Kitiporchai, S. (1997), "Modelling of cold-formed purlin- sheeting systems - Part 1: full model", Thin Walled Struct., 27(3), 223-243.
DOI
ScienceOn
|
3 |
Lucas, R.M., Al-Bermani, G.A. and Kitiporchai, S. (1997), "Modelling of cold-formed purlin- sheeting systems - Part 2: simplified model", Thin Walled Struct., 27(4), 263-286.
DOI
ScienceOn
|
4 |
Pekoz, T. and Soroushian, P. (1982), Behaviour of C and Z-purlins under wind uplift, Sixth International Specialty Conference on Cold-formed Steel Structures, St. Louis, Missouri, USA.
|
5 |
Ren, C., Li, L.Y. and Yang, J. (2012), "Bending analysis of partially restrained channel-section purlins subjected to up-lift loads", J. Constr. Steel Res., 72, 254-260.
DOI
|
6 |
Rhodes, J. and Lawson, R.M. (1992), Design of Structures Using Cold-formed Steel Sections, SCI Publication, 089, The Steel Construction Institute.
|
7 |
Roger, C.A. and Schuster, R.M. (1997), "Flange/web distortional buckling of cold-formed steel sections in bending", Thin Walled Struct., 27(1), 13-29.
DOI
|
8 |
Rousch, C.J. and Hancock, G.J. (1997), "Comparison of tests of bridged and unbridged purlins with a nonlinear analysis model", J. Constr. Steel Res., 41(2/3), 197-220.
DOI
|
9 |
Sokol, L. (1996), "Stability of cold formed purlins braced by steel sheeting", Thin Walled Struct., 25(4), 247-268.
DOI
|
10 |
EN 1993-1-3 (2006), Eurocode 3 - design of steel structures - Part 1-3: general rules - supplementary rules for cold-formed members and sheeting, BSI.
|
11 |
Hancock, G.J., Celeban, M., Healy, C., Georgiou, P.N. and Ings, N.L. (1990), "Tests of purlins with screw fastened sheeting under wind uplift", Tenth International Speciality Conference on Cold-formed Steel Structures, St. Louis, Missouri, USA.
|
12 |
Katnam, K.B., van Impe, R., Lagae, G. and De Strycker, M. (2007a), "A theoretical numerical study of the rotational restraint in cold-formed steel single skin purlin-sheeting systems", Comput. Struct., 85, 1185-1193.
DOI
|
13 |
Katnam, K.B., van Impe, R., Lagae, G. and De Strycker, M. (2007b), "Modelling of cold-formed steel sandwich purlin-sheeting systems to estimate the rotational restraint", Thin Walled Struct., 45, 584-590.
DOI
|
14 |
Li, L.Y. (2004), "Lateral-torsional buckling of cold-formed zed-purlins partial-laterally restrained by metal sheeting", Thin Walled Struct., 42(7), 995-1011.
DOI
|
15 |
Li, L.Y. and Chu, X.T. (2007), Cold-formed Steel Sections, Eds. Martin, L.H. and Purkiss, J.A., Structural Design of Steelwork, Elsevier, Oxford.
|
16 |
Li, L.Y. (2010), "Calculation of moment capacity of cold-formed steel members", Int. J. of Struct. Eng., 2(2), 101-115.
|
17 |
Vieira, Jr L.C.M., Malite, M. and Schafer, B.W. (2010), "Simplified models for cross-section stress demands on C-section purlins in uplift", Thin Walled Struct., 48, 33-41.
DOI
|
18 |
Svensson, S.E. (1985), "Lateral buckling of beams analysed as elastically supported columns subject to a varying axial force", J. Constr. Steel Res., 5, 179-193.
DOI
|
19 |
Toma, T., and Wittemann, K. (1994), "Design of cold-formed purlins and rails restrained by sheeting", J. Constr. Steel Res., 31, 149-168.
DOI
|
20 |
Vrany, T. (2006), "Effect of loading on the rotational restraint of cold -formed purlins", Thin-Walled Struct.,44 (12), 1287-1292.
DOI
ScienceOn
|
21 |
Ye, Z.M., Kettle, R. and Li, L.Y. (2004), "Analysis of cold-formed zed-purlins partially restrained by steel sheeting", Comput. Struct., 82, 731-739.
DOI
|
22 |
Ye, Z.M., Kettle, R., Li, L.Y. and Schafer, B. (2002), "Buckling behaviour of cold-formed zed- purlins partially restrained by steel sheeting", Thin Walled Struct., 40, 853-864.
DOI
|