• 동력기계공학회지
• /
• 제17권2호
• /
• pp.56-62
• /
• 2013

A technique is presented that uses a circular waveguide for the measurement of the bulk shear (S-wave) velocities of unconsolidated, saturated media, with particular application to near surface soils. The technique requires the measurement of the attenuation characteristics of the fundamental torsional mode that propagate along an embedded pipe, from which the acoustic properties of the surrounding medium are inferred. From the dispersion curve analysis, the feasibility of using fundamental torsional mode which is non-dispersive and have constant attenuation over all frequency range is discussed. The principles behind the technique are discussed and the results of an experimental laboratory validation are presented. The experimental data are best fitted for the different depths of wetted sand and the shear velocities are evaluated as a function of depths. Also the characteristics of the reflected signal from the defects are examined and the reflection coefficients are calculated for identifying the relation between defect sizes and the magnitude of the reflected signal.

• 한국전산구조공학회논문집
• /
• 제35권5호
• /
• pp.277-286
• /
• 2022

국내의 서비스 수준 지진(SLE)과 최대 고려 지진(MCE)의 두 RC 건물 구조물의 실험 및 해석 결과에서 얻은 탄성 및 비탄성 응답은 비틀림에 대한 전단 및 비틀림 거동에서 저항 메커니즘의 특성을 연구하는데 사용될 수 있다. 불균형 구조의 특성 연구에서는 전단력 및 비틀림 모멘트에 대한 병진 변형 및 비틀림 변형의 상호 작용 효과를 나타내는 방정식이 제안하였다. 탄성과 비탄성 거동에서 힘과 변형 사이에 상관 관계 유무가 다르기 때문에 증분 전단력과 증분 비틀림 모멘트를 최대 벽 프레임 변형을 중심으로 항복, 제하 및 재하중 단계로 구분하여 해당 증분 변형 및 증분 비틀림 변형 측면에서 해석을 수행하였다. 두 가지 주요 지배 모드의 탄성 조합에서 병진 변형은 주로 전단력에 기여하는 반면 비틀림 변형은 전체 비틀림 모멘트에 크게 기여한다. 그러나 비탄성 응답에서는 증분 병진 변형이 증분 전단력과 증분 비틀림 모멘트 모두에 기여하게 된다. 따라서 주어진 방정식을 이용하여 비탄성 응답에서 비틀림의 편심 감소, 비틀림 강성 저하 및 겉보기 에너지 생성과 같은 모든 현상들을 설명하였다.

• 한국산학기술학회논문지
• /
• 제18권10호
• /
• pp.739-744
• /
• 2017

탄성변형과 피로손상은 카트의 주행성능에 영향을 미치는 것으로 카트 프레임에 영구변형을 유발할 수 있다. 카트프레임은 현가장치와 다른 장치를 포함하지 않으므로 두 가지 변형에 결정적인 영향을 미칠 수 있는 코너주행 시 동적 거동은 비틀림 변형이 원인이 된다. 선회주행 시 카트의 동적 거동을 분석하기 위해 카트의 GPS추적이 실시간으로 이루어지고 카트 프레임에 작용하는 비틀림 응력값을 측정하였다. 레저카트와 레이싱카트의 재료물성치들은 인장실험을 통해 얻었다. 비틀림 응력집중과 프레임 변형은 얻어진 결과 값을 토대로 프레임의 응력해석을 통하여 파악하였다. 개발된 주행분석장치를 이용하여 레저카트와 레이싱카트를 각 조건별로 실차실험을 수행하였고 이를 통한 코너에서 카트의 주행거동을 살펴보았다. 카트가 곡선주행 시 원심력으로 인해 하중이동이 발생하였으며 카트프레임에 비틀림 응력이 발생하였다. 예를 들어 레저카드의 경우, 40 km/h의 속도로 운전할 때 최대 비틀림 피로한도를 측정한 최대 비틀림응력은 230 MPa이며 비틀림 피로한도계수는 0.65를 나타내었다. 뿐만 아니라 카트의 선회 시 운전요소들을 운전측정시스템을 인스톨한 실측장비에서 측정하였으며 카트의 운전거동은 수직변위에 의해 측정하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.405-410
• /
• 2002

In this paper, numerical method of evaluating the influence of Dual Mass Flywheel(DMFW) to the torsional vibration of the automotive power train system is developed. And we applied the procedure to the currently being developed HMC's DMFW attached to an FF car to find out the best performance characteristics during the Tip-in/Tip-out operating condition. In doing this we compared the numerical results with the experimental results and Performed Parametric studies. We find out that the torsional vibrational characteristics of power train system can be significantly improved when we optimally choose DMFW, and the developed numerical procedure could be used as valuable tools in developing new DMFW.

• 한국자동차공학회논문집
• /
• 제3권2호
• /
• pp.30-41
• /
• 1995

Gear rattle is a source of vibration and noise in automotive gearbox casing and generally occurs at or near system resonant frequencies. The neutral gear rattle of the gearbox. is affected by the stiffness and hysteresis torque in the clutch disk and drag torque determining balancing point of the clutch disk operating range. The experiment is carried out in the pre-damper type clutch and a manual transmission of a automobile equipped for inline four-sylinder four-cycle 1.5L MPI engine and the computer simulation is executed by 5th order Runge-Kutta method. The results of the simulation analysis and experimental studies show the dynamic behavior of clutch and a phenomenon of the neutral gear rattle with respect to drag torque and torsional characteristics of the clutch.

• 한국철도학회논문집
• /
• 제3권1호
• /
• pp.34-41
• /
• 2000

The analysis of static and dynamic characteristics of reinforced roadbed materials was performed through model and laboratory tests. The strength characteristic of reinforced roadbed materials such as HMS-25 and soil were investigated through the unconfined axial compression test, the model soil box test and the combined resonant column and torsional shear test. The unconfined axial compression strength of HMS-25 shows a steady increasement in strength due to the chemical hardening reaction between HMS-25 and water. The result of model soil box test reveals that railroad roadbed of HMS-25 is better than that of soil in several aspects, such as, bearing capacity and settlement. The combined resonant column and torsional shear test result indicates that shear modulus of HMS-25 and soil increase with the power of 0.5 to the confining pressure and linear relationship to normalized shear modulus and damping ratio.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.609-616
• /
• 2001

The vibrational characteristics of nonuniform circular rods have been studied theoretically and experimentally in this paper. The differential equation of torsional motion expressed in terms of the angular displacement has been solved exactly and approximately for a stepped circular rod and for a conically-tapered rod. Solutions of the boundary-value problem have yielded the natural frequencies, mode shapes and forced responses of the rods. The theoretical solutions of forced response have been verified by comparing them with experimental ones.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 추계학술발표대회 논문집
• /
• pp.183-186
• /
• 2003

Long shafts for power transmission should transmit torsional load with vibrational stability. Hybrid shafts made of unidirectional fiber-reinforced composite and metal have high fundamental bending natural frequency as well as high torque transmission capability. However, thermal residual stresses due to the coefficient difference of thermal expansion of the composite and metal are developed so that the high residual stresses decrease fatigue resistance of the hybrid shafts, especially at low operating temperatures. In this work, axial compressive preload was given to the shaft in order to change the residual stresses. Static and fatigue torsional tests were performed and correlated with stress analyses with respect to the preload and service temperature.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.13-17
• /
• 2010

This presentation examines the characteristics of torsional vibration in axisymmetric out-of-plane vibrations of an annular Mindin plate. The out-of-plane vibration of circular or annular plates have been investigated since a long years ago by many researchers. When the classical Kirchhoff plate theory neglecting the effect of transverse shear deformation is applied to a thick plate, its out-of-plane natural frequencies are much different from reality. And so, since Minlin presented a plate theory considering the effect of rotary inertia and transverse shear deformation, many researches for the out-of-plane natural vibration of circular or annular Mindin plates have been performed. But almost all researchers missed the torsional vibration due to transverse shear deformation in axisymmetric out-of-plane vibrations of the circular or annular Mindin plate. Therefore, in this presentation, we verify the existence of torsional vibration of an annular plate and present the natural frequencies of an annular plate with free outer boundary surface.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 A
• /
• pp.230-233
• /
• 2003

This paper describes the design of torsional oscillation controller in HVDC system using the universal SSR eigenvalue program. The suggested design procedures consist of three steps. Fist step is to identify the characteristics of AC system with torsional modes and HVDC system; then, to determine the control parameters of the suggested torsional oscillation controller (SSRStab) to compensate the phasor lagging due to rectifier controller. Finally, using time-domain simulation program verifies the designed parameters and determine the appropriate gain. The suggested method is simple to tune the parameters and effective to damp the least stable torsional oscillation mode.