• 대한전기학회논문지
• /
• 제35권12호
• /
• pp.567-572
• /
• 1986

In this paper, a new type of step motor with two degree of mechanical freedom, which is named rotary-Linear Step Motor(RLSM), is presented. Its rotor axis can perform linear and rotary motions either separately or simultaneously. This paper discribes the design of RLSM using finite element method in which the magnetic saturation effect of the iron core is taken into account. The design parameters such as torques, forces and inductances are obtained from the computed magnetic vector potentials. A new type of Rotary-Linear Step Motor was constructed. The calculated parameters agree well with measurements.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 ISIS 2003
• /
• pp.427-430
• /
• 2003

Nano drive control of five phase stepping motors is developed based on computational intelligence technology and it enables to drive into 5 million equiangular parts per revolution with keeping normal speed and torques. The experimental results of realizing high resolution/accuracy with low vibration and decreasing both heat loss and electric power consumption are mentioned.

• Tribology and Lubricants
• /
• 제14권3호
• /
• pp.65-73
• /
• 1998

A dynamic analysis and friction loss of non-variable swash plate compressor are studied theoretically. Rotating swash plate and reciprocating pistons are modelled kinematically, and forces and torques acting on rotor-bearing system are analyzed. Then, friction losses on 4 roller bearings, 10 sliding parts between swash plate and shoes, and 10 lubricating surfaces between cylinders and pistons are calculated. On each frictional element of sliding surfaces and roller bearings, the same friction loss is obtained, respectively.

• 대한전자공학회논문지
• /
• 제26권10호
• /
• pp.1471-1478
• /
• 1989

The optimal-time control of the coordinated motion of two robot manipulators may be of consequence in the industrial automation. In this paper two robot manipulators garsping a common object are assumed to travel a specified Cartesian path and the method how to derive the optimal-time solution is explained. This approach is based on parameterizing the corresponding patn and utilizing the phase-plame technique in the trajectory planning. Also the torques supplied by the actuators are assumed to have some constant bounds. The effectiveness of this approach is demonstrated by a computer simulation using a PUMA 560 manipulator.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.534-539
• /
• 1988

This paper presents a method to balance the links of an articulated robot for an unknown payload using an automatic balancing mechanism. The balancing masses are controlled to move in their appropriate locations so that the joint torques of the links are eliminated. After balancing the mass of the payload is obtained from the balancing conditions. Based upon a series of simulation studies some results are discussed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.162-167
• /
• 1991

The manipulability ellipsoid and the force ellipsoid for a single robot are extended to the case of a multi-robot system. The force ellipsoid is applied to solve the optimal load distribution for the multi-robot system. Two cases are considered in solving the optimal load distribution. In one case, there are no constraints on the joint torques, and the analytic solution ;a given. In the other case, the torque constraints are given in terms of the maximum power consumption, and the algorithm for the solution is proposed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.951-952
• /
• 2009

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.570-573
• /
• 2000

A control law for a SCARA robot manipulator is designed using recursive torque methods. This scheme uses previous torques and error dynamics to generate torque controls at the present time and adopts relatively simple numerical and control algorithms that can be easily realizable. In order to evaluate the performance and robustness of the suggested control system, the 2-link SCARA robot manipulator is practically implemented using a dSPACE interface. It is found that the recursive controller has a good tracking performance in spite of the presence of payload disturbances.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1997년도 춘계학술대회 학술발표 논문집
• /
• pp.234-238
• /
• 1997

This paper describes the tip force control of a flexible minature arm. The arm is driven by the torques generated by the cells, and the endpoint of the arm is controlled so that it moves in synchrony with the fluctuation of the target and maintains a constant distance to the surface of the traget.

• 항공우주시스템공학회지
• /
• 제4권4호
• /
• pp.37-43
• /
• 2010

Need for agile satellites increases for performing various mission due to increase of satellite image applications and users. This paper performs attitude maneuver analysis by using Satellite Tool Kit(STK) made by AGI. In order to automate the STK analysis process, a MATLAB program is developed to generate STK input data and to process STK output data. Five attitude maneuver modes are analyzed and attitude angle variation and required torques are calculated.