• 한국구조물진단유지관리공학회 논문집
• /
• 제26권6호
• /
• pp.54-63
• /
• 2022

이 연구는 구조물 내진보강 장치의 하나인 마찰댐퍼에 관한 것으로, 내부 마찰재를 복합재료의 일종인 초고분자량 폴리에틸렌으로 대체하여 댐퍼를 개발하였다. 또한 마찰력이 발생하는 내부 구조를 여러 층으로 적층하는 다중 마찰방식을 적용하였다. 개발된 다중 마찰댐퍼의 성능 검증을 위해서 재료에 대한 기초 물성과 마모 특성, 디스크 스프링에 대한 특성 분석 시험을 수행하였다. 마모시험 시험결과, UHMWPE의 질량 감소율은 0.003%로 복합재료 기반의 마찰재 중에서 가장 우수한 성능을 보였다. 디스크 스프링은 유한요소해석과 시험결과로부터 설계기초자료를 확보하였다. 또한 개발된 다중 마찰댐퍼의 품질 안정성을 확인하기 위해 토크값에 따른 마찰력 변화와 감쇠장치에 대한 지진하중 시험을 수행하였다. 품질성능 시험결과, 토크 값 조절에 따라 선형적인 마찰력 변화를 보였으며, 지진하중 시험 결과, 마찰댐퍼의 허용오차는 설계기준에서 요구하는 15% 미만으로 나타나 내진보강 장치로서의 요구조건을 만족하는 것으로 나타났다.

• Journal of Korean Dental Science
• /
• 제5권2호
• /
• pp.48-53
• /
• 2012

Various ceramic implant systems made of yttria-stabilized tetragonal zirconia polycystal (Y-TZP) have become commercially available in recent years. A search of the literature was performed to assess the clinical success of dental Y-TZP implants and whether the osseointegration of Y-TZP is comparable to that of titanium, the standard implant material. No controlled clinical studies in humans regarding clinical outcomes or osseointegration could be identified. Clinical data were restricted to case studies and case series. Only 7 animal studies were found. Osseointegration was evaluated at 4 weeks to 24 months after placement in different animal models, sites and under different loading conditions. The mean bone-implant contact percentage was above 60% in almost all experimental groups. In studies that used titanium implants as a control, Y-TZP implants were comparable to or even better than titanium implants. Surface modifications may further improve initial bone healing and resistance to removal torque. Y-TZP implants may have the potential to become an alternative to titanium implants but cannot currently be recommended for routine clinical use, as no long-term clinical data are available.

• 한국철도학회논문집
• /
• 제20권1호
• /
• pp.43-54
• /
• 2017

본 논문에서는 철도차량 추진시스템을 위한 3-레그 인버터와 5-레그 인버터의 성능을 비교/분석하고 철도차량에 5-레그 인버터를 적용함에 있어 최적의 동작 조건을 제시한다. 5-레그 인버터는 두 대의 3-레그 인버터에 비해 2개의 스위치가 감소되며, 하나의 제어보드로 두 대의 3상 전동기를 독립적으로 제어할 수 있다. 이로 인해 두 대의 3-레그 인버터를 이용할 경우보다 시스템의 비용 감소와 소형화가 가능하다. 본 논문에서는 먼저 도시철도 차량에서 사용중인 유도전동기 제어 기법과 PWM 방법을 분석한다. 다음으로 5-레그 인버터의 기본 동작과 특징을 분석한다. 이러한 분석을 바탕으로 동일한 유도전동기 제어 기법과 PWM 방법을 3-레그 인버터와 5-레그 인버터에 적용했을 때 유도전동기의 속도와 토크 특성을 비교하고 분석한다.

• 한국항공우주학회지
• /
• 제41권7호
• /
• pp.561-568
• /
• 2013

7,000lb 급 헬리콥터를 위한 무베어링 로터 허브 시스템을 설계한 후, 무베어링 로터 허브 시스템의 주요 구성품 중 하나인 유연보에 대해 요구수명 8,000시간을 만족하는지 확인하기 위한 피로해석을 수행하였다. 2차원 탄성 보 모델에 대한 단면 구조해석 방법을 적용하였으며, 정적구조해석을 통해 피로손상에 취약할 것으로 예상되는 두 단면에 대한 피로해석을 수행하였다. 구조해석을 위해 VABS를 사용하여 유연보 단면 형상에 대한 인장, 굽힘 및 뒤틀림 강성을 계산하였고, wohler equation을 적용하여 유연보를 구성하는 두 가지 복합재 소재에 대한 S-N 곡선을 생성하였다. CAMRAD II를 통해 무베어링 로터 시스템의 하중해석을 수행하였으며, 하중해석 결과를 HELIX/FELIX 표준하중 스펙트럼에 적용하여 무베어링 로터 시스템의 하중 스펙트럼을 생성한 후, 이를 통해 피로해석을 수행하였다.

• Journal of Mechanical Science and Technology
• /
• 제16권6호
• /
• pp.839-850
• /
• 2002

A performance simulation program for the turboprop engine (PT6A-62), which is the power plant of the first Korean indigenous basic trainer KT-1, was developed for performance prediction, development of an EHMS (Engine Health Monitoring System) and the flight simulator. Characteristics of components including compressors, turbines, power turbines and the constant speed propeller were required for the steady state and transient performance analysis with on and off design point analysis. In most cases, these were substituted for what scaled from similar engine components'characteristics with the scaling law. The developed program was evaluated with the performance data provided by the engine manufacturer and with analysis results of GASTURB program, which is well known for the performance simulation of gas turbines. Performance parameters such as mass flow rate, compressor pressure ratio, fuel flow rate, specific fuel consumption and turbine inlet temperature were discussed to evaluate validity of the developed program at various cases. The first case was the sea level static standard condition and other cases were considered with various altitudes, flight velocities and part loads with the range between idle and 105% rotational speed of the gas generator. In the transient analysis, the Continuity of Mass Flow Method was utilized under the condition that mass stored between components is ignored and the flow compatibility is satisfied, and the Modified Euler Method was used for integration of the surplus torque. The transient performance analysis for various fuel schedules was performed. When the fuel step increase was considered, the overshoot of the turbine inlet temperature occurred. However, in case of ramp increase of the fuel longer than step increase of the fuel, the overshoot of the turbine inlet temperature was effectively reduced.

• 한국항공우주학회지
• /
• 제44권5호
• /
• pp.391-398
• /
• 2016

본 연구에서는 난류 유입조건을 갖는 수평축 풍력터빈 블레이드의 공력 하중에 대해 초점을 맞추어 연구하였다. 난류모델은 풍속과 방향에 대한 변동을 포함하며, 그 특성은 난류 강도와 표준편차로 표현된다. IEC61400-1에서는 정상 난류 모델과 정상 풍속 측면도에 대해서 피로해석을 수행하도록 규정하고 있다. 이를 위해 공력 최적설계 절차를 통해 얻어낸 MW급 수평축 풍력터빈 블레이드 허브와 저속 회전축에 대한 공력하중 해석을 수행한다. 공력하중 성분은 수치적인 절차를 통해 얻어내며 이를 블레이드 회전 특성을 고려하여 해석적으로 검토하였다. 난류 조건을 고려했을 때의 최대 추력과 토크의 변동치는 난류 조건을 고려하지 않았을 때의 값들에 비해 5~8 배 더 큰 값을 보였다. 따라서 난류 조건을 반영한 하중 해석은 풍력터빈 블레이드의 구조설계에 있어서 필수적임을 확인하였다.

• 한국산업융합학회 논문집
• /
• 제7권2호
• /
• pp.153-159
• /
• 2004

The purpose of this research is to investigate the performance of swirl combustion chamber diesel engine by changing the jet passage area, the depth and shape of the piston top cavity (main chamber). The performance of diesel engine with newly changed swirl combustion chamber was tested through the experimental conditions as engine speed, load and injection timing etc. The test results were compared and analyzed. And another purpose of this research is to make a new diesel engine that is satisfied fuel consumption and regulation value of exhaust gas. 1. The rate of fuel consumption was affected significantly by the jet passage area at the high speed and load than low speed and low load. The influence of jet passage large area was proven to decrease the rate of fuel consumption. 2. Smoke was affected significantly by the depth of the piston top cavity, but exhaust temperature and the rate of fuel consumption wasn't affected. The rate of fuel consumption was affected by changing injection timing. 3. The rate of fuel consumption, exhaust temperature and Smoke were affected significantly by the shape of the piston top cavity from rectangular to trapezoid. That is we have all high value. The exhaust smoke density and exhaust gas temperature depended sensitively on variation of the injection timing rather than the shape of the combustion chamber within the experimental conditions. 4. We made a new diesel engine that is satisfied design target values(sfc=190 g/hr, NOx + THC=6.0 g/KWh, PM=0.3 KWh), the rate of fuel consumption and emission standard etc., through changing injection timing at the maximum torque point and rated power point. Although we have a little high NOx value.

• 대한기계학회논문집A
• /
• 제35권11호
• /
• pp.1461-1469
• /
• 2011

본 논문은 3 차원 유한요소해석 기법을 이용하여 토오크 시험을 위한 표준시험시편의 각도 및 동심 오열이 시편의 응력과 변형률 변화에 미치는 영향을 분석하였다. 해석 결과의 정량적 비교를 위해 각, 동심 및 복합 축 오열에 대한 평균 굽힘 변형률을 적용하였으며, 시편 형상에 따른 축 오열 영향을 확인하기 위해 환봉형 시편과 튜브형 시편에 대해 각각 유한요소해석을 실시하였다. 해석결과로부터 얻어진 변형률과 응력의 변화로 축 오열의 종류와 방향을 예측하는 일반적인 기준을 제시하였으며, 초기 항복조건을 적용하여 축 오열이 토오크 시편의 초기 항복 모멘트에 미치는 영향을 분석하였다.

• 한국표면공학회지
• /
• 제44권1호
• /
• pp.21-25
• /
• 2011

This test focuses on the correlation between the lubrication, ductility and strength through the change of nut lubricant which decides joining angle for A490 bolt sets required in the AASHTO (American Association of State Highway & Transportation Officials). Because the lubrication of high tension bolt, nut, washer sets becomes an important factor to ductility and joining load, the quality improvement is required for improving reliability and securing enough lubrication of maker and user. This study examines the quality characteristics required in the specification through tests because only this standard specifies joining quality in the extreme conditions (as much about two times of the joining angle on site as normal condition). Moreover, this study is limited to the test on joining axial force required in the AASHTO for the three nut lubrication conditions of A490 bolt set. It is concluded that the nuts should be coated or waxed enough for the improvement of the joining axial force and ductility of bolts required in the standards. It is shown that in the case of plain high tension bolt sets, a rust preventing lubricative oil shall be applied and the torque coefficient value for A490 bolt sets should be maintained below 0.175.

• Journal of Biosystems Engineering
• /
• 제39권1호
• /
• pp.21-33
• /
• 2014

Background: Significant technological development and changes happened in the tractor industries. Contrariwise, the test procedures of the major standard development organizations (SDO's) remained unchanged or with a little modification over the years, demanding new tractor test standards or improvement of existing ones for tractor performance, safety, and comfort. Purpose: This study focuses on reviewing the research trends regarding performance, safety and comfort evaluation of agricultural tractors. Based on this review, few recommendations were proposed to revise or improve the current test standards. Review: Tractor power take-off power test using the DC electric dynamometer reduced human error in the testing process and increased the accuracy of the test results. GPS signals were used to determine acceleration and converted into torque. High capacity double extended octagonal ring dynamometer has been designed to measure drawbar forces. Numerical optimization methodology has been used to design three-point hitch. Numerous technologies, driving strategies, and transmission characteristics are being considered for reducing emissions of gaseous and particulate pollutants. Engine emission control technology standards need to be revised to meet the exhaust regulations for agricultural tractors. Finite Element Analysis (FEA) program has been used to design Roll-Over Protective Structures (ROPS). Program and methodology has been presented for testing tractor brake systems. Whole-body vibration emission levels have been found to be very dependent upon the nature of field operation performed, and the test track techniques required development/adaptation to improve their suitability during standardized assessment. Emphasizes should be given to improve visibility and thermal environment inside the cab for tractor operator. Tractors need to be evaluated under electromagnetic compatibility test conditions due to large growing of electronic devices. Research trends reviewed in this paper can be considered for possible revision or improvement of tractor performance, safety, and comfort test standards.