• 드라이브 ㆍ 컨트롤
• /
• 제19권4호
• /
• pp.46-53
• /
• 2022

RIn this study, a test tractor that could measure various types of agricultural operational loads was developed, and its performance was verified. This tractor could be used to measure the load generated during agricultural work and convert the related data into a database. A test tractor was developed using an 80-kW-rated load tractor, and it could measure various types of field test data, such as engine torque and rpm, wheel torque, PTO(power take-off) torque, hexometer, IMU/INS sensor, steering angle sensor, hydraulic pressure, and flow sensor data. To verify the developed test tractor, a verification test using an agriculture rotavator was performed. The test conditions were L1, L2, and L3 based on the tractor's main and sub-transmission stages, and stages 1 and 2 were selected as the PTO. In a comparison of the analyzed test data, similar tendencies in the test results of this research and other research (Kim's research) were seen. Through this, the developed test tractor was verified. In the future, we plan to conduct research on the tractor developed in this study using various attached working machines.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.928-931
• /
• 1996

It is necessary to develop the simulator for the test of stability and torque before the walking experiment of biped robot, because a robot may be damaged in an actual experiment. This thesis deals with the development of three-dimensional simulator for improving efficiency and safety during development and experimentation. The simulator is composed of three parts-solving dynamics, rendering pictures and communicating with the robot. In the first part, the D-H parameter and parameter of links can be loaded from the file and edited in the program. The results are obtained by using the Newton-Euler method and are stored in the file. Through the above process, the proper length of link and driving force can be found by using simulator before designing the robot. The second part is organized so that the user can easily see a specific value or a portion he wants by setting viewing parameters interactively. A robot is also shown as a shaded rendering picture in this part. In the last part, the simulator sends each desired angle of joints to the robot controller and each real angle of joints is taken from the controller and passed to the second part. The safety of the experiment is improved by driving the robot after checking whether the robot can be actuatable or not and whether the ZMP is located within the sole of the foot or not for a specific gait. The state of the robot can be easily grasped by showing the shaded rendering picture which displays the position of the ZMP, the driving force and the shape of robot.

• 한국유체기계학회 논문집
• /
• 제10권3호
• /
• pp.17-24
• /
• 2007

This paper presents the design procedure of a vertical wind turbine named jet-wheel-turbo turbine and the numerical and experimental verifications. The design parameters such as the rotor inlet angle, the diameter-to-hub ratio, the inlet guide outlet angle and the solidity were optimized to maximize the energy transfer, and to further increase the turbine efficiency by applying the side guide vane and the side opening to the rotor. The maximum power coefficient of 0.59, which is much higher than the ever-designed three-bladed horizontal turbines, was experimentally obtained when the optimal inlet- and side-guide vanes were installed and both sides of the rotor were 80% opened. The maximum power coefficients occur at the tip speed ratio ranging between 0.6 and 0.7. This vertical-axis turbine model can be applied to the large-scale power generation system with the speed and torque control algorithm for the specified wind characteristics.

• 한국정밀공학회지
• /
• 제23권4호
• /
• pp.75-82
• /
• 2006

In this paper, we propose an optimal trajectory for biped robots to move up-and-down stairs using a genetic algorithm and a computed-torque control for biped robots to be dynamically stable. First, a Real-Coded Genetic Algorithm (RCGA) which of operators are composed of reproduction, crossover and mutation is used to minimize the total energy. Constraints are divided into equalities and inequalities: Equality constraints consist of a position condition at the start and end of a step period and repeatability conditions related to each joint angle and angular velocity. Inequality constraints include collision avoidance conditions of a swing leg at the face and edge of a stair, knee joint conditions with respect to the avoidance of the kinematic singularity, and the zero moment point condition with respect to the stability into the going direction. In order to approximate a gait, each joint angle trajectory is defined as a 4-th order polynomial of which coefficients are chromosomes. The effectiveness of the proposed optimal trajectory is shown in computer simulations with a 6-dof biped robot that consists of seven links in the sagittal plane. The trajectory is more efficient than that generated by the modified GCIPM. And various trajectories generated by the proposed GA method are analyzed in a viewpoint of the consumption energy: walking on even ground, ascending stairs, and descending stairs.

• 대한정형도수물리치료학회지
• /
• 제11권1호
• /
• pp.37-48
• /
• 2005

Objects: This study is designed to analysis improvement and maintaince of trunk stability targeting patients who need post operative rehabilitation exercise after undergoing opened microscopic laser discectomy(OMLD) due to HNP. Method: Between March 2004 and February 2005 a total sixty patients who underwent OMLD due to $L_4/L_5$, $L_5/S_1$ HNP and who agreed to the experiment were subject for this study. Experimental group consisted of 18 subjects, and they underwent 45 minutes dynamic lumbar stabilization exercise And control group consisted of 18 subjects who conducted conservative physical therapy based on the use of physical modality for 45 minutes except to exercise. Results: Experimental group that was lumbar extensor's isometric peak torque, weight distribution of both leg, trunk muscle balance and Oswestry LBP disability index increased during 12 weeks in a statistically significant manner compared to before exercise (p<.05). When re-test was tried, isometric peak torque (p>.05) and Oswestry LBP disability index(p<.05) maintained 12th week level or improved. Weight distribution rate of both leg and trunk muscle balance maintained the level of 8th week of exercise execution(p<.05). Control group that was lumbar extensor's isometric peak torque, weight distribution rate of both leg and trunk muscle balance aggravated during 12 weeks compared to pre-test(p>.05) But, Oswestry LBP disability index increased in a statistically significant level compared to pre-test(p<.05). When re-test was tried, isometric peak torque increased slightly compared to pre-test, but decreased when at least $60^{\circ}$ flexion angle(p>.05). Weight distribution rate of both leg and trunk muscle balance also aggravated compared to pre-test(p>.05), and Oswestry LBP disability index was similar to the 4th week of physical therapy execution(p>.05). Conclusion: Successive postoperative Especially, Application of dynamic lumbar stabilization exercise program is important than traditional lumbar strengthening exercise program in the maintaince of spinal stability.

• 조명전기설비학회논문지
• /
• 제18권2호
• /
• pp.142-149
• /
• 2004

본 논문은 바람으로부터 최대출력을 추출하기 위해 계통연계 풍력발전시스템의 신경회로망 제어기와 추출된 최대출력을 계통에 전달하기 위한 전력제어기를 제안한다. 유도발전기, 변압기, 정류기 및 인버터 등으로 구성된 제어기를 갖춘 풍력발전시스템의 모델링과 시뮬레이션에 대해 검토하고자 한다. 본 논문에서는 동특성해석을 위해 드라이브 트레인 모델, 유도발전기 모델과 계통접속 모델을 제시한다. 신경회로망 제어기는 풍차날개의 피치각을 제어하여 바람으로부터 최대출력을 추출한다. 피치제어방법은 기계적으로 복잡하지만 제어성능은 스톨제어보다 우수하게 된다. MATLAB으로 수행한 시뮬레이션 결과는 발전기 토오크, 발전기 회전속도, 피치각, 계통으로 주입되는 유효/무효전력 등을 예시하고 있으며 그 결과를 보면 제안된 제어기의 효용성을 입증할 수 있다.

• 로봇학회논문지
• /
• 제3권4호
• /
• pp.331-337
• /
• 2008

The field of robots is being widely accepted as a new technology today. Many robots are produced continuously to impart amusement to people. Especially the robot which operates with a wheelbarrow was enough of a work of art to arouse excitement in the audiences. All the wheelbarrow robots share the same technology in that the direction of roll and pitch are acting as balance controllers, allowing the robots to maintain balance for a long period by continuously moving forward and backward. However one disadvantage of this technology is that they cannot avoid obstacles in their way. Therefore movement in sideways is a necessity. For the control of rotation of yawing direction, the angle and direction of rotation are adjusted according to the velocity and torque of rotation of a motor. Therefore this study aimed to inquire into controlling yawing direction, which is responsible for rotation of a robot. This was followed by creating a simulation of a wheelbarrow robot and equipping the robot with a yawing direction controlling device in the center of the body so as to allow sideway movements.

• International Journal of Aeronautical and Space Sciences
• /
• 제8권2호
• /
• pp.17-27
• /
• 2007

Minimum-time attitude maneuvers of three-axis stabilized spacecraft are presented to study the feasibility of using three magnetic torquers perform large angle maneuvers. Previous applications of magnetic torquers have been limited to spin-stabilized satellites or supplemental actuators of three axis stabilized satellites because of the capability of magnetic torquers to produce torques about a specific axes. The minimum-time attitude maneuver problem is solved by applying a parameter optimization method for orbital cases to verify that the magnetic torque system can perform as required. Direct collocation and a nonlinear programming method with a constraining method by Simpson's rule are used to convert the minimum-time maneuver problems into parameter optimization problems. An appropriate number of nodes is presented to find a bang-bang type solution to the minimum-time problem. Some modifications in the boundary conditions of final attitude are made to solve the problem more robustly and efficiently. The numerical studies illustrate that the presented method can provide a capable and robust attitude reorientation by using only magnetic torquers. However, the required maneuver times are relatively longer than when thrusters or wheels are used. Performance of the system in the presence of errors in the magnetometer as well as the geomagnetic field model still good.

• 한국조명전기설비학회지:조명전기설비
• /
• 제9권6호
• /
• pp.57-64
• /
• 1995

본 논문에서는 산업용 구동력으로써 대부분을 차지하는 유도전동기의 가변속 구동시 성능이 우수한 벡터제어 시스템에 관하여 연구하였다. 유도전동기의 회전자 각속도와 고정자 전류에 의한 간접적인 회전자 기준자속 추정방식을 채택하였으며, 이때의 전류제어기는 상호 간섭이 일어나지 않는 비간섭 동기 회전좌표계 PI제어기를 구성하였으며 시스템을 견실하게 하였다. 공간전압벡터 변조기법을 적용하여 전압 이용율의 향상과 전류제어가 용이하도록 하였다. 기기의 모델링 및 디지털 시뮬레이션을 통하여 속응성과 원활한 제어특성이 나타나는 유도전동기 구동시스템임을 입증하였다.

• 전자공학회논문지SC
• /
• 제46권6호
• /
• pp.9-13
• /
• 2009

반작용과 자이로를 사용하는 저궤도 위성체의 3축 제어에서 반작용휠은 휠 속도나 운동량으로 제어토크를 만들고 자이로는 자세각과 자세각속도를 측정한다. 본 논문에서 저궤도 위성체의 다이나믹 모델링은 기본적인 본체만을 고려한 강체에 태양전지판 등을 고려한 연성체의 회전운동방정식과 반작용휠로 구성된다. 강인제어기$(H_\infty)$는 외란에 의한 모델이 가변될 수 있는 강체 및 연성체를 포함한 플랜트를 안정화시키기 위해 적용하였으며, 기존 저궤도 위성체를 안정화시키기 위해 사용된 PI 제어기와 성능을 비교하여 자세제어에 필요한 위상제어의 우수성을 보여주는데 있다.