• Proceedings of the KIEE Conference
• /
• 1993.11a
• /
• pp.163-165
• /
• 1993

This study describes the influence of the mutual inductance between the adjacent phase windings of variable reluctance motor[VRM] and presents a new type of inverter for reduction of such influence. In this inverter topology, though an additional power switch is used as compared with the conventional C-dump inverter circuit, unwanted negative torque produced by the mutual inductance is remarkably reduced. Hence, the circuits results in increase of the average torque and contributes to the improvement of overall drive efficiency. Theoretical prediction is verified by experimental results obtained with the integration of presented inverter and prototype 6/4 VRM.

• Journal of computational fluids engineering
• /
• v.18 no.2
• /
• pp.41-48
• /
• 2013

Ice accretion on the solid surface is an importance factor in assessing the performance of aircraft and wind turbine blade. Changes in the external shape due to ice accretion can greatly deteriorate the aerodynamic performance. In this study, a three-dimensional upwind-type second-order positivity-preserving finite volume CFD scheme based on the unstructured mesh topology is developed to simulate two-phase flow in atmospheric icing condition. The code is then validated by comparing with NASA IRT experimental data on the sphere. The present results of the collection efficiency are found to be in close agreement with experimental data and show improvement near the stagnation region.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.3
• /
• pp.171-179
• /
• 2014

Among the P2P based multimedia streaming architecture, multiple chain architecture has advantage in adapting to dynamically changing network topology simply and rapidly, so this architecture is used for UCC broadcasting system. In UCC broadcasting system, general peer involved in DSLAM becomes UCC server rather than broadcasting system that transfers data from ISP servers. Therefore UCC data generated from UCC server peers is transmitted to peers through DSLAM, and this transmission uses uplink bandwidth of DSLAM. In this paper, I propose an efficient management method of DSLAM uplink bandwidths through negotiating tracker and UCC server peer or head peers of DSLAM. I propose the method that tracker restricts a bitrate of uplink stream of UCC servers when used uplink bandwidth of DSLAM exceeds a certain point of maximum uplink bandwidths. I will show the improved performance of proposed scheme rather than general method with respect to the uplink bandwidth of DSLAM by numerical analysis and simulation.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.3
• /
• pp.231-235
• /
• 2008

Thyristor rectifiers are still the preferred choice for large magnet power supplies. However, large harmonic voltages, resulting in large current ripple, and slow dynamic response are major drawbacks of these converters. Joos presented a topology and a control technique for a hybrid large-power high-precision magnet power supply in 1996. The system consists of a phase controlled rectifier (PCR) connected in series with a high-frequency PWM converter. This paper improves the power circuit of the PWM converter using interphase transformer. Simulation result proves effect of the proposed system.

• Journal of Power Electronics
• /
• v.9 no.2
• /
• pp.180-187
• /
• 2009

When converters operate in megahertz range, the passive components and magnetic devices generate high losses. However, the eddy current issues and choices of magnetic cores significantly affect on the design stage. Apart from that, the components' reduction, miniaturization technique and frequency scaling are required as well as improvement in thermal capability, integration technique, circuit topologies and PCB layout optimization. In transformer design, the winding and core losses give great attention to the design stage. From simulation work, it is found that E-25066 material manufactured by AVX could be the most suitable core for high frequency transformer design. By employing planar geometry topology, the material can generate significant power loss savings of more than 67% compared to other materials studied in this work. Furthermore, young researchers can use this information to develop new approaches based on concepts, issues and methodology in the design of magnetic components for high frequency applications.

• Proceedings of the KIEE Conference
• /
• 2008.10c
• /
• pp.126-128
• /
• 2008

This paper presents an architecture for driving multiple paralleled cold cathode fluorescent lamps (CCFLs) for back lighting applications. Multi CCFL operation and increase of brightness, the key to the architecture is a proposed capacitive coupling approach for lamp ignition. This system is consist of a flyback converter, a single inverter to drive multiple lamps and conductive floating reflector. The topology is capable of driving a number of parallel lamps with independent accurate lamp, The capacitive coupling the leakage inductance and stray capacitance creation which it used, current regulation and improving cost effectiveness with significant reduction in size and weight, compared to typical high frequency ac ballast. Experimental demonstration results for ten of parallel CCFLs with simultaneous ignition.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.18 no.1
• /
• pp.110-116
• /
• 2013

This paper proposes a current ripple reduction method to improve the control performance of B4 type inverter that is studied for cost-effective drive systems. B4 inverters employ only four switches and they have a center-tapped connection between the split dc-link capacitors and one phase of a three-phase motor or load. In the B4 topology, unbalanced three-phase voltages will be generated due to the dc-link voltage ripple. To solve this problem, this paper presents a voltage distortion compensation method that adjusts the voltage reference with the consideration of dc-link voltage ripple. The validity of the proposed method is verified by simulation and excremental results with an induction machine.

• Proceedings of the KIEE Conference
• /
• 2002.11b
• /
• pp.193-195
• /
• 2002

This paper presents the methods to solve the problem about Power System Protection Program(PROSET) and describe the database relation and schema with UML. PROSET is a overall program system to protect power system and correct it. In the context of the PROSET it is so difficult to edit database data when topology is changed. When the renewal of data is performed. all changed values are disappeared. Therefore, it will not be expected to know the present situation by using the information of the databases data. So it is necessary to solve this problem. Solution is copy of the user. Only E.R diagram is used to express database schema and relation. So, in this paper, UML(Unified Modeling Language) will be used to express PROSET and database of MCD-H and MDT-H.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.13 no.3
• /
• pp.43-51
• /
• 2017

MANET consists of only wireless nodes having limited processing capability. It processes routing and data transmission through cooperation among each other. And it is exposed to many attack threats due to the dynamic topology by movement of nodes and multi-hop communication. Therefore, the reliability of transmitted data between nodes must be improved and security of integrity must be high. In this paper, we propose a method to increase the reliability of transmitted data by providing a secure cryptography protocol. The proposed method used a hierarchical structure to provide smooth cryptographic services. The cluster authentication node issues the cluster authentication key pair and unique key to the nodes. The nodes performs the encryption through two steps of encryption using cluster public key and block encryption using unique key. Because of this, the robustness against data forgery attacks was heightened. The superior performance of the proposed method can be confirmed through comparative experiment with the existing security routing method.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.5
• /
• pp.2346-2361
• /
• 2017

A major challenge in cloud infrastructure is the efficient allocation of virtual network elements on top of substrate network elements. Path algebra is a mathematical framework which allows the validation and convergence analysis of the mono-constraint or multi-constraint routing problems independently of the network topology or size. The present study proposes a new heuristic approach based on mathematical framework "paths algebra" to map virtual nodes and links to substrate nodes and paths in cloud. In this approach, we define a measure criterion to rank the substrate nodes, and map the virtual nodes to substrate nodes according to their ranks by using a greedy algorithm. In addition, considering multi-constraint routing in virtual link mapping stage, the used paths algebra framework allows a more flexible and extendable embedding. Obtained results of simulations show appropriate improvement in acceptance ratio of virtual networks and cost incurred by the infrastructure networks.