• Bulletin of the Korean Space Science Society
• /
• 1998.10a
• /
• pp.53.2-53
• /
• 1998

No Abstract.See Full-text

• Journal of KIISE:Computer Systems and Theory
• /
• v.31 no.10
• /
• pp.593-602
• /
• 2004

A new surface reconstruction scheme for approximating the surface from a set of unorganized 3D points is proposed. Our method, called shrink-wrapped boundary face (SWBF) algorithm, produces the final surface by iteratively shrinking the initial mesh generated from the definition of the boundary faces. Proposed method surmounts the genus-0 spherical topology restriction of previous shrink-wrapping based mesh generation technique, and can be applicable to any kind of surface topology. Furthermore, SWBF is much faster than the previous one since it requires only local nearest-point-search in the shrinking process. According to experiments, it is proved to be very robust and efficient for mesh generation from unorganized points cloud.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.2
• /
• pp.232-239
• /
• 2007

There is an increasing concern to interconnect DG(Distributed Generation) units into a distribution system and operate and maintain the system power quality within a proper level to distribution companies, regional electricity utilities and industrial customers. Recently, this situation makes many experts estimate a next generation of distribution system which is composed of some micro-grids. But the proposed micro-grid is only mentioned as a small grid with some DG units, some power quality compensators, communication and control equipments. In this paper, a topology and an operation/control algorithm of the micro-grid which is able to supply the electricity with high reliability and quality, are proposed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.6B
• /
• pp.523-532
• /
• 2003

GENMET(GEneralized Multihop Network) which is based on Wavelength-Division Multiplexsing(WDM) and can be used in order to construct the next generation lightwave network is a logical(virtual), packet-switched and multihop topology network. GENMET is a regular multihop network which is a generalization of Shuffle network and do Bruijn network As such, it has the advantage of simple routing which is critical in a high speed network Given a physical topology, different logical topologies can be derived for assigning wavelengths to the UserNodes. By appropriately assigning wavelengths, performance of the network, such as mean hop count, maximum throughput and mean packet delay can be improved. In this paper, we propose heuristic algorithms for effectively assigning a limited number of wavelengths to the given UserNodes. The Performance of proposed algorithm is compared with the random assignment and the lower bounds.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.4
• /
• pp.1193-1200
• /
• 2000

A network topology has been an important factor for an efficient network management, but data collection for the network configuration has been done manually or semi automatically by a network administrator or an expert. Requirements to generate an intro-domain network topology ar usually either all IP addresses with subne $t^ernet mask or the network identification of all IP addresses. The amounts of traffic are generally high in the semi-automatic system due to using large number of low-level protocols and commands to get rather simple data. In this paper, we propose an algorithm which can be executed with only publicly available input. It can find all IP addresses as well as the network boundary of an intra-domain by using an intelligent method developed in this algorithm. The collected data will be used to draw a network map automatically by using a proposed network topology generation algorithm.hm.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.24 no.5
• /
• pp.319-326
• /
• 2019

The use of high-voltage gain converters is essential for distributed power generation systems with renewable energy sources, such as fuel and solar cells, due to their low-voltage characteristics. In this study, a novel high-voltage gain non-isolated buck boost converter topology is proposed to cope with the need of a high-voltage conversion ratio without the transformer for the renewable energy sources. Given that the proposed topology utilizes the cascode structure, the voltage gain and the efficiency are higher than those of other conventional non-isolated converters. To demonstrate the feasibility of the proposed topology, the operation principle is presented, and the steady-state characteristics are analyzed in detail. The validity of the proposed converter is verified by experiments with a 400 W prototype converter.

• Journal of Power Electronics
• /
• v.13 no.2
• /
• pp.296-303
• /
• 2013

This paper proposes a high efficiency three-phase cascaded phase shifted H-bridge multi-level inverter without DC/DC converters for grid-tied multi string photovoltaic (PV) applications. The cascaded H-bridge topology is suitable for PV applications since each PV module can act as a separate DC source for each cascaded H-bridge module. The proposed phase shifted H-bridge multi-level topology offers advantages such as operation at a lower switching frequency and a lower current ripple when compared to conventional two level topologies. It is also shown that low ripple sinusoidal current waveforms are generated with a unity power factor. The control algorithm permits the independent control of each DC link voltage with a maximum power point for each string of PV modules. The use of the controller area network (CAN) communication protocol for H-bridge multi-level inverters, along with localized PWM generation and PV voltage regulation are implemented. It is also shown that the expansion and modularization capabilities of the H-bridge modules are improved since the individual inverter modules operate more independently. The proposed topology is implemented for a three phase 240kW multi-level PV power conditioning system (PCS) which has 40kW H-bridge modules. The experimental results show that the proposed topology has good performance.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.3
• /
• pp.367-372
• /
• 2018

The objective of this paper is to optimize the cross-section of aluminum decking units used in the bass boats under operating conditions, and to verify the optimized model from the results via by ANSYS software. Aluminum decking unit is needed to endure specific loading while leisure activity and sailing. For a stiffer and more cost-neutral aluminum decking unit, optimization is often considered in the naval and marine industries. This optimization of the aluminum decking unit is performed using the ANSYS program, which is based on the topology optimization method. The generation of finite element models and stress evaluations are conducted using the ANSYS Multiphysics module, which is based on the Finite Element Method (FEM). Through such a series of studies, it was possible to determine the most suitable case for satisfying the structural strength found among the phase-optimized aluminum deck units in bass boats. From these optimization results, CASE 1 shows the best solution in comparison with the other cases for this optimization. By linking the topology optimization with the structural strength analysis, the optimal solution can be found in a relatively short amount of time, and these procedures are expected to be applicable to many fields of engineering.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.4
• /
• pp.405-414
• /
• 2011

Recently, the development of several hundreds of kW scale PCS for fuel cell generation is required as commercialization process of distributed generation systems using high temperature fuel cells such as MCFC begins. This paper proposes and optimized topology suitable for MCFC fuel cell generation system and LCL filter design method considering voltage quality of local loads such as MBOP. An interleaving technique is applied to step-up DC-DC converter, optimized number of phases is determined considering efficiency and volume. Also, a LCL filter design method is proposed considering quality of current injected to the grid as well as that of voltage across the local load. The proposed PCS system is validated through reduced 1kW prototype.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.4
• /
• pp.236-247
• /
• 1993

An davanced method for the automatic generation of parametric models in computer- aided design systems is required for most of two-dimensional model which is represented as a set of geometric elements, and constraining scheme formulas. The development system uses geometric constraints and support of topology parameters from feature recognition and grouping the design entities into optimal ones from pre-designed drawings. The aim of this paper is to present guidelines for the application and development of parametric design modules for the standard parts in mechanical system, the basic constitutional part of mold base, and other 2D features.