• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.1
• /
• pp.101-115
• /
• 2006

As coastal erosion is increasing sharply because of sudden changes in the natural environment and increases in artificial development, the problem of coastal erosion become an important issue, socially and economically. To building the data which needed to grasp the situation and find a solution, we need the monitoring system for long-term. In this study, we analyzed the coastal topography and land cover changes in the Haeundae Beach during 60 years. The Haeundae Beach is the most famous beach in the country and coastal erosion are going on. First, we analyzed the change of coastal topography by calculated the coastline and area of the beach using aerial photos during 60 years. We extracted the coastline by digitized on aerial photo and corrected the height of tide level using sounding and GPS survey data. And we computed the area of beach and analyzed the change of area during 60 years. Second, we analyzed the change of land cover using landcover map. We made the detailed landcover map by on-screen digitizing and estimated the soil loss for the area nearby Haeundae Beach. As a result, we could see that the coastline get nearer to land and the area of beach has been reduced in general. We think that interception of sand supply by the development is the artificial cause of coastal erosion. The result of this study would be useful in long-term coastal monitoring and to analyze the cause of coastal environment change. We expect that the result is available on the coastal information system.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.6
• /
• pp.423-433
• /
• 2019

In order to predict the seabed topography change due to the construction of offshore wind power structures in the west-southern sea of Korea, field observations for tides, tidal currents, suspended sediment concentrations and seabed sediments were carried out at the same time. These data could be used for numerical simulation. In numerical experiments, the empirical constants for the suspended sediment flux were determined by the trial and error method. When a concentration distribution factor was 0.1 and a proportional constant was 0.05 in the suspended sediment equilibrium concentration formulae, the calculated suspended sediment concentrations were reasonably similar with the observed ones. Also, it was appropriate for the open boundary conditions of the suspended sediment when the south-east boundary corner was 11.0 times, the south-west was 0.5 times, the westnorth 1.0 times, the north-west was 1.0 times and the north-east was 1.0 times, respectively, using the time series of the observed suspended sediment concentrations. In this case, the depth change was smooth and not intermittent around the open boundaries. From these calibrations, the annual water depth change before and after construction of the offshore wind power structures was shown under 1 cm. The reason was that the used numerical model for the large scale grid could not reproduce a local scour phenomenon and they showed almost no significant velocity change over ± 2 cm/s because the jacket structures with small size diameter, about 1 m, were a water-permeable. Therefore, it was natural that there was a slight change on seabed topography in the study area.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.221-226
• /
• 2004

For comparing more than two images, the precise geometric corrections should be preceded because it necessary to eliminate systematic errors due to basic sensor information difference and non-systematic errors due to topographical undulations. In this study, we did sensor modeling using satellite sensor information to make a basic map of change detection for artificial topography. We eliminated the systematic errors which can be occurred in photographing conditions using GCP and DEM data. The Kompsat EOC images relief could be reduced by precise rectification method. Classifying images which was used for change detections by city and forest zone, the accuracy of the matching results are increased by 10% and the positioning accuracies also increased.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.148-151
• /
• 2004

In this study the micro landform of tide flat in west Seohan bay. North Korea was classified and the change of this environment was detected by using Landsat TM. FTM+, KOMPAST. For this. ISODATA method of the unsupervised methods was used to classify the micro landform while tasseled cap method was used to detect the change of environment in west Seohan bay, North Korea by passing years. This study shows the possibility that the topography analysis and change especially in unapproachable area could be detected and monitored by using satellite images.

• Ecology and Resilient Infrastructure
• /
• v.1 no.2
• /
• pp.68-81
• /
• 2014

In this study, the numerical simulation regarding the process and characteristics of topography change due to the vegetation recruitment and growth was carried out by adding the vegetation growth model to two-dimensional flow and sediment transport models. The vegetation introduction and recruitment on the condition for developing an alternate bar reduced the bar migration. The vegetated area and channel width changes were more significantly influenced by changes in upstream discharge rather than the duration of low flow. When the upstream discharge decreased, the vegetation area increased and the channel width decreased. The vegetation introduction and recruitment on the condition for developing a braided channel significantly influenced the characteristics of topography changes. In the braided channel, vegetation reduced the braided index, and when the upstream discharge decreased significantly, the channel topography was changed from the braided channel to the single channel. The vegetation area decreased as the upstream discharge increased. The channel width decreased significantly after the vegetation was introduced and it also decreased as the upstream discharge decreased. It was confirmed through the numerical simulation that a decrease in flood discharge accelerated the vegetation introduction and recruitment in the channel and this allowed to confirm its influence on the characteristics of topography changes qualitatively.

• Korean Journal of Remote Sensing
• /
• v.39 no.6_3
• /
• pp.1747-1761
• /
• 2023

Wetlands, defined as lands periodically inundated or exposed during the year, are crucial for sustaining biodiversity and filtering environmental pollutants. The importance of mapping and monitoring their topographical changes is therefore paramount. This study focuses on the topographical variations at the Incheon River estuary wetland post-restoration, noting a lack of adequate prior measurements. Using a multi-temporal Sentinel-1 dataset from October 2014 to March 2023, we mapped long-term variations in water bodies and detected topographical change anomalies using a pixel-frequency approach. Our analysis, based on 196 Sentinel-1 acquisitions from an ascending orbit, revealed significant topography changes. Since 2020, employing the pixel-frequency technique, we observed area increases of +0.0195, 0.0016, 0.0075, and 0.0163 km² in water level sections at depths of 2-3 m, 1-2 m, 0-1 m, and less than 0 m, respectively. These findings underscore the effectiveness of the wetland restoration efforts in the area.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.04a
• /
• pp.259-263
• /
• 2006

Development and maintenance of forests are very important at Korea which has mountainous topography of more than 60% of the national territory. Under the circumstances, variety period's data is being required for the continuous monitoring of forest area. In this study, change of forests type was analyzed using Landsat TM satellite image which have multi-spectral bands. Furthermore, change detection system for forests type was constructed on web for the periodical monitoring. By using this system, everyone can easily use for the monitoring of forest type's periodical change.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1996.10a
• /
• pp.64-74
• /
• 1996

The meachanism for cutting epoxy resins specimens which were specially provided was experimentally investigated to obtain a fine surface finish. the specimens were cut the three-dimensional undrer dry conditions using a lathe. the relationship between the topography of the cut surface due to the change rate of temperature of the cutting condition using sintered carbides (P20, K10, KT150) was investigated. the main results obtained are as follows: 1) The change rate of temperature of the cutting edge is increased in nearly proportion ot cutting speed feed rate depth of cut. 2)The profile of surface roughness were regulated k10 but irregulated P20 KT150. 3) The surface roughness value decreased K10 rather than P20 KT150. 3) The surface roughness value decreased K10 rather than P20 KT 150.4)The cutting resistance increased thrust force rather than cutting force due to the visco-elastic material of epoxy resins.

• The korean journal of orthodontics
• /
• v.30 no.4 s.81
• /
• pp.453-465
• /
• 2000

The purpose of this study was to investigate the change of mechanical properties, surface topography and frictional force of various nickel titanium wires after recycling. Three types of nickel-titanium wires and one type of stainless steel wire were divided to three groups: as-received condition(T0:control group), treated in artificial saliva for four weeks(T1) and autoclaved after being treated in artificial saliva(T2). Some changes were observed for the selected mechanical properties in tensile test, surface topography by means of SEM and 3D profilogram, and frictional coefficient. The findings suggest that: 1. Nickel-titanium wires demonstrated no statistically significant differences in maximum tensile strength, elongation rate and modulus of elasticity, but stainless steel wire demonstrated statistically significant differences in maximum tensile strength, elongation rate and modulus of elasticity between the groups(p<0.05). 2. NiTi, Optimalloy, Stainless Steel wires demonstrated increased pitting and corrosion in SEM finding. 3. Recycled NiTi, Optimalloy and stainless steel wires demonstrated significantly greater surface roughness(Ra and Rq) through 3D profilogram when compared with the control wires(p<0.05), but Sentalloy didn't demonstrate significant difference. 4. Recycled NiTi, Optimalloy and stainless steel wires demonstrated significantly greater maximum frictional coefficient when compared with the control wires(p<0.05), but Sentalloy didn't demonstrate significant difference The changes of surface roughness and frictional coefficient in NiTi and Optimalloy had no clinical implication. Consequently recycled nickel titanium wires demonstrated no clinical problem in tensile properties, surface topography and frictional coefficient.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.275-279
• /
• 2004

This study was done to detect the topographic and terrain change of the vicinity of the west coast. To make the basic map of the change in topology and terrain, the mosaic images were made using the images from the satellite, which were given the geometric correction based on the GCP (Ground Control Point) and DEM (Digital Elenation Model) data. The accuracy of the images was examined by .empaling them with CCP through 1:25,000's digital map. After that, among the resultant images of the 1970s and 2000s, those of Sihwa, Hwaong and Ansan, the lands reclaimed by drainage were compared to observe the change in the area. From this study, the accuracy of the images of the west coast from satellite could be acquired and the change of the topology and terrain was detected effectively. From the results, it was known that, in case of the land the topological change was not so big due to the development in the reclaimed land or the bare land. In Sihwa, the size of the land was increased 180 $\textrm{km}^2$ and that of the seashore was decreased 110 km. in Hwaong the size was increased 50 $\textrm{km}^2$ and in Ansan the city space was increased 71 $\textrm{km}^2$ due to the formation of the industrial complex.