• 제목/요약/키워드: Topography analysis

검색결과 938건 처리시간 0.027초

지형분할 격자크기에 따른 토석류 흐름 특성 (Characterization of Debris Flow at Various Topographical Division Sizes)

  • 진현우;황영철
    • 한국지반환경공학회 논문집
    • /
    • 제16권3호
    • /
    • pp.49-55
    • /
    • 2015
  • 토석류가 발생할 때는 강우패턴, 강우강도 및 해석을 위한 지형여건에 따라 토석류의 발생량과 흐름의 속도가 달라진다. 지형여건의 고려는 일정규모의 격자로 지형을 구분하고 구분된 격자 내의 지형경사는 평균경사로 가정하여 계산하므로 굴곡이 심한 지형에서는 분할되는 격자를 세분할수록 실제와 근접한 결과를 얻을 수 있게 된다. 그러나 지금까지는 해석알고리즘 및 컴퓨터 계산능력, 해석수행 시간 등의 한계로 인해 지형분할 격자를 상당히 크게 구분하여 수행하고 있다. 그러나 토석류 해석의 정확도를 위해서는 지형구분 격자크기를 가급적 작게 하여야 하므로, 실무적 접근을 위한 적절한 격자규모의 제안이 필요하게 된다. 따라서 본 논문에서는 기존 연구에서 논의되었던 누가 강우량, 강우강도, 강우지속시간 및 선행 강우량 등의 강우 특성 이외에 지형분할 격자크기가 토석류 흐름에 미치는 영향을 평가하고 이로부터 합리적이고 현실성 있는 지형분할규모를 제시하였다.

휴대폰 카메라용 비구면 Glass 렌즈 전사특성 분석 (Transcription Characteristics in the Molding of Aspheric Glass Lenses for Camera Phone Module)

  • 차두환;이준기;김민제;이동길;김혜정;김정호
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 2008년도 추계학술대회 논문집
    • /
    • pp.363-366
    • /
    • 2008
  • The transcription characteristics in the molding of aspheric glass lenses for camera phone modules have been investigated experimentally. The surface topographies of both the form and the roughness were compared between the mold and the molded lens. The molded lens showed a transcription ratio of 93.4%, which is obtained by comparing the form accuracy (PV) values of the mold and the molded lens. The transcription of the roughness topography was ascertained by bearing ratio analysis.

  • PDF

지역규모의 지형경관 보전을 위한 상대고도 분석 방법론 제안 : 분석범위 설정을 중심으로 (Suggestion of the Relative Elevation Analysis Methods for Conservation of Local Topography : Focused on Analysis Range)

  • 송원경
    • 한국환경복원기술학회지
    • /
    • 제17권5호
    • /
    • pp.19-28
    • /
    • 2014
  • Given the structure of Korean mountains, it is more appropriate to apply the relative elevation method than the absolute elevation method. However, so far there were not suitable quantitative methodologies to analyze relative elevation, these analytical concepts were difficult to be utilized in urban environmental planning. This study suggested three methods for analyzing relative elevation, and one method for setting the analytical scope of relative elevation by calculating terrain relief. The results showed that the procedure considering 500m radius of each point and standardizing to 30% of the 7th height ridge was the most effective method to extract the local topography. This methodology is the quantitative tool to be able to conserve local important hills and ridges, and apply to fields of urban environmental planning and ecological restoration, especially urban ecological network.

휴대폰 카메라용 비구면 Glass렌즈 전사특성 분석 (Transcription Characteristics in the Molding of Aspheric Glass Lenses for Camera Phone Module)

  • 차두환;김혜정;김정호
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
    • /
    • pp.336-336
    • /
    • 2008
  • The transcription characteristics in the molding of aspheric glass lenses for camera phone modules have been investigated experimentally. The surface topographies of both the form and the roughness were compared between the mold and the molded lens. The molded lens showed a transcription ratio of 93.4%, which is obtained bycomparing the form accuracy (PV) values of the mold and the molded lens. The transcription of the roughness topography was ascertained by bearing ratio analysis.

  • PDF

위상천이 영사식 모아레법을 이용한 고속 3차원 형상복원 (East 3-Dimensional Shape Reconstruction Using Phase-Shifting Grating Projection Moire Method)

  • 최이배;구본기;정연구
    • 한국감성과학회:학술대회논문집
    • /
    • 한국감성과학회 1998년도 추계학술발표 논문집
    • /
    • pp.111-115
    • /
    • 1998
  • A phase-shifting projection moire method particularly intended for high-speed three-dimensional shape reconstruction of diffuse objects is presented. Emphasis is on realization of phase-shifting fringe analysis in projection moire topography using a set of line grating pairs designed to provide different phase shifts in sequence. Further a time-integral fringe capturing scheme is devised to remove undesirable high frequency original grating patterns in real-time without time-consuming software image processing. Finally the performances of the proposed method are discussed with measurement results.

  • PDF

지형의 특성을 이용한 상호상관정합 기반 지형참조항법 알고리즘 (Terrain reference navigation algorithm based on cross-correlation matching using topography characteristics)

  • 이보미;권재현
    • 한국측량학회:학술대회논문집
    • /
    • 한국측량학회 2010년 춘계학술발표회 논문집
    • /
    • pp.161-164
    • /
    • 2010
  • The study on terrain referenced navigation has been proceeded from 1940s in advanced country with the object of military. In this study, the analysis regarding algorithm developed using cross-correlation matching algorithm and extended Kalman filter and simulation will be introduced. As a result, the standard deviation of position error from cross-correlation matching algorithm has been calculated 34.3m. It meant that the result has stable accuracy on the navigation. However, further study on terrain referenced navigation based on analysis of various topographic characteristics should be performed.

  • PDF

중년 여성의 3차원 유방 형상 분석을 위한 방법론 연구 (Fundamental Morphological Consideration for the 3-D Shape Analysis of the Middle-aged Women's Breast)

  • 이현영;홍경희
    • 한국의류학회지
    • /
    • 제26권5호
    • /
    • pp.703-714
    • /
    • 2002
  • This paper proposed the basic consideration for the reliable 3-D measurement and analysis of middle-aged women's breast using 3-D phase-shifting moire topography. The surface borderline of the breast based on the anatomical structure on the skin was suggested. Various breast dimensions that can be measured using 3-D measurement system and their measuring methods were discussed. Tips for the measurement of sagged breast were also proposed. It is expected that these basic considerations contribute to draw attention to the reliable measurement of women's breast and provide a kind of tools for the standardization of 3-D shape measurement of breast.

자동차회사 근로자를 대상으로 한 근골격계 자각증상과 moire 영상 진단과의 관계 연구 (Research on the Relation between Musculoskeletal symptoms and Diagnosis using Moire Topography among Workers at an Automobile Manufacturing Plant)

  • 천은주;이영길;장두섭;이기남;송용선
    • 대한예방한의학회지
    • /
    • 제5권2호
    • /
    • pp.69-92
    • /
    • 2001
  • The purposes of this study were to offer foundation making more certain standards of musculoskeletal disorder diagnosis, We researched musculoskeletal symptoms degrees, frequencies, and cares and then examined relation between musculoskeletal symptoms and diagnosis of musculoskeletal conditions using moire topography among workers at an automobile manufacturing plant. Therefore we propose the possibility of moire topography as diagnosing utilities of musculoskeletal disorders. Methods: This study was to examine the general characteristics, complaints of musculoskeletal symptoms, and work-related musculoskeletal disorder rates of cervicobrachial and lumbar area by survey among 435 workers at an automobile manufacturing plant and then to show each frequency and percentage, In the diagnosis using moire topography, we studied pain control necessity of cervicobrachial and lumbar area, 435 subjects were classified by 5 levels: A(no symptoms), B(need management), C(need treatment) and then more divided by B1(light symptoms)/B2(heavy symptoms), C1(light symptoms)/C2(heavy symptoms), And musculoskeletal areas were divided by 2 parts, cervicobrachial area(neck, shoulder, arm&elbow, and wrist&hand) and lumbar area, Then, frequency and percentage of each musculoskeletal areas(cervicobrachial and lumbar area) were appeared. At last, Pearson's chi-square test analysis was utilized to observe the relation between diagnosis using moire topography and general characteristics and the relation between diagnosis using moire topography and work-related complaint of musculoskeletal symptoms of cervicobrachial and lumbar area, Results: The subjects employed for this research were categorized into; by gender, all of them were males(l00%): by age, under 35 years 12 %, 36-40 years 56.3%, 41-45 years 26.3 %, and above 46 years 5.3% with 36-40 years accounting for most of it. By living location, owned houses represented 69.7%, rented houses 23.4%, monthly-rented 1.6%, the others 5.3%; by education, middle school and lower represented 3.0%, high school 89.4%, and junior college and higher 7.6% with high school occupying most of the group. By marital status, married represented 95.2%, unmarried 4.1%, and the others 0.7% with most of them married; by alcohol, drinking represented 81.8% and non-drinking 18.2%; by smoking status, smoking represented 53.6%, non-smoking 46.4% with no big difference between them. By working time(hours/week), below 50 represented 26.9%, 50-60 67.6%, above 60 5.5%; by working time(hours/day), below 9 represented 21.6%, 10-12 73.1%, above 13 5.3%; by job tenure(years), below 10 represented 25.1%, 11-15 54.3%, 16-20 15.2%, above 21 5.5%. By personal income per year, below 30 million won represented 11.0%, 30-40 84.8%, above 40 4.1%; by sleeping hours, below 6 hours represented 26.7%, 7-8 hours 69.9%, above 9 hours 3.4%. Complaint rates of musculoskeletal symptoms and work-related musculoskeletal disorder rates were 63.9% and 54.9% with shoulder area occupying most of both them. By pain degree of musculoskeletal symptoms, shoulder area represented $2.73{\pm}0.84$, lumbar area $2.66{\pm}0.86$, wrist and hand area $2.59{\pm}0.86$, neck area $2.55{\pm}0.74$, and arm and elbow area $2.48{\pm}0.71$. By cares about musculoskeletal symptoms, taking medication or care represented 34.4%-46.7%, absence or leave 15.4%-28.7%, and job transfer 6.3%-11.5%. So experienced cases more than one thing among cares about musculoskeletal symptoms represented 39.6%-54%. In the diagnosis using moire topography, pain control necessity of cervicobrachial area was shown below; A(no symptoms) 20.7%, B1(need management/light symptoms) 64.6%, B2(need management/heavy symptoms) 11.5%, C1(need treatment/light symptoms) 3.0%, C2(need treatment/heavy symptoms) 0.2%. By lumbar area, A(no symptoms) 8.7%, B1(need management/light symptoms) 52.2%, B2(need management/heavy symptoms) 30.3%, C1(need treatment/light symptoms) 8.7%, C2(need treatment/heavy symptoms) was none. In the relation between pain control necessity and general characteristics, age(P=0.013), education(P=0.000), and job tenure(P=0.012) with pain control necessity showed differences with significance. The relation between pain control necessity and complaint of musculoskeletal symptoms of cervicobrachial and lumbar area showed no difference with significance; in cervicobrachial area represented P=0.708, lumbar area P=0.318 Conclusions: This study for musculoskeletal symptoms on workers at automobile manufacturing plant showed that complaint rates of musculoskeletal symptoms for cervicobrachial and lumbar area were so high, 63.9%. But Pearson's chi-square test analysis was utilized to study the relation between musculoskeletal symptoms and the diagnosis using moire topography, showed no differences with significance. They have no differences with significance, but the prevalence rates of diagnosis using moire topography for cervicobrachial and lumbar area were more higher than complaint rates of musculoskeletal symptoms; complaint rates of musculoskeletal symptoms were 52.4%, 34.5% and the diagnosis using moire topography were 79.3%, 91.3% for cervicobrachial and lumbar area. The results of this study indicate that the diagnosis using moire topography can find weak musculoskeletal disorders that an individual can not feel, not be judged work-related musculoskeletal disease. Therefore, this study has an important meaning that diagnosis using moire topography can predict and control own physical condition complete musculoskeletal disorders beforehand, since oriental medicine theory considers that prevention is important.

  • PDF

Land Subsidence Survey and Analysis Using the Terrestrial LIDAR in Jakarta Bay, Indonesia

  • Park, Han-San
    • 해양환경안전학회지
    • /
    • 제19권3호
    • /
    • pp.233-240
    • /
    • 2013
  • Jakarta is the capital city of Indonesia which has problems of land subsidence with the rates of about 1 to 15 cm/year, up to 20-25 cm/year. The study has examined the land subsidence in Pantai Mutiara, Jakarta Bay which is a reclaimed area by using the Terrestrial LIDAR survey technique. The Terrestrial LIDAR survey results show that the survey site has mean elevation of 0.24 m with the highest elevation of 0.93 m and lowest - 0.35 m. Considering that AHHW (approximate highest high water) is 0.51 m, many areas of the survey site are lying below the AHHW. Pantai Mutiara area is showing various subsidence rates depending on sites although the site is relatively narrow and small (about 1 $km^2$). There is elevation differences of almost 1m within the site. In this study, key information including topography, dike height distribution, and future coastal flooding risk of the survey area was able to be provided by Terrestrial LIDAR survey conducted only once. Especially, as the 3D precision topography effectively conveys important messages relating to vulnerability of the site, policy makers and stakeholders can easily understand the situation of the site.

고단차 불연속 형상의 3차원 측정을 위한 이중파장 위상천이 영사식 무아레 (Two-Wavelength Phase-Shifting Projection $Moir\acute{e}$ Topography for Measurement of Three-Dimensional Profiles with High Step Discontinuities)

  • 김승우;오정택;정문식;최이배
    • 대한기계학회논문집A
    • /
    • 제23권7호
    • /
    • pp.1129-1138
    • /
    • 1999
  • [$Moir\acute{e}$] technique is now being extensively investigated as a fast non-contact means of three-dimensional profile measurement especially for reverse engineering. One problem with $moir\acute{e}$ technique is so called $2\pi$-ambiguity problem that limits the maximum step height difference between two neighboring sampling points to be less than half the equivalent wavelength of $moir\acute{e}$ fringes. In this investigation, a new two-wavelength scheme of projection $moir\acute{e}$ topography is proposed and tested to cope with the $2\pi$-ambiguity problem. Experimental results are discussed to assess the new method in measuring large objects with high step discontinuities.