• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.4
• /
• pp.77-87
• /
• 2004

It is important for hydrographers to extract the accurate cross section of a river for the hydrographical analysis of the topography. Aerial photographs were used to extract the cross section of a river for the advantages of the accuracy and economical efficiency in this study, while the direct measurement has been used in existing studies. An ortho-rectified photo map using imageries taken by the PKNU 2 (High-resolution, multi-spectral, aerial photographic system developed by our laboratory) was generated using the surveyed data and a digital map. The cross section of a river that was obtained from the ortho-rectified by the surveyed Kinematic data of GPS was compared with the result using ImageStation stereo-plotter of corp. Z/I Imaging. As a result of this study, the RMSE in the ortho-rect process using the surveyed GPS data was lowered as from 5.5788 pixels (about 2m) to 2.84 (about 1m) in comparison with it in the process using a digital map. The surveyed kinematic GPS in extraction of the cross section of a river was excellent as 6.6cm of the planimetric and precision in the confidence level of 95%. The correlation coefficient between the result from the using stereo-plotter and the extraction of cross section of a river using aerial photos was 0.8 hydrographical acquisition of it using PKNU 2 imagery will be possible.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.4 s.316
• /
• pp.28-35
• /
• 2007

Airbone laser altimeters have been utilized for 3D topographic mapping of the earth, moon, and planets with high resolution and accuracy, which is a rapidly growing remote sensing technique that measures the round-trip time emitted laser pulse to determine the topography. The traveling time from the laser scanner to the Earth's surface and back is directly related to the distance of the sensor to the ground. When there are several objects within the travel path of the laser pulse, the reflected laser pluses are distorted by surface variation within the footprint, generating multiple echoes because each target transforms the emitted pulse. The shapes of the received waveforms also contain important information about surface roughness, slope and reflectivity. Waveform processing algorithms parameterize and model the return signal resulting from the interaction of the transmitted laser pulse with the surface. Each of the multiple targets within the footprint can be identified. Assuming each response is gaussian, returns are modeled as a mixture gaussian distribution. Then, the parameters of the model are estimated by LMS Method or EM algorithm However, each response actually shows the skewness in the right side with the slowly decaying tail. For the application to require more accurate analysis, the tail information is to be quantified by an approach to decompose the tail. One method to handle with this problem is proposed in this study.

• Korean Journal of Environment and Ecology
• /
• v.24 no.6
• /
• pp.763-771
• /
• 2010

The rapid increase of wildlife passage installation since the late 2000s was aimed to reduce roadkill caused by habitat fragmentation and losses related to road construction, but wildlife-vehicle collisions are now still occurred even near the wildlife passage area. This is the reason that the effectiveness of wildlife passage have not been evaluated in combination with absence of monitoring data and management strategy of the wildlife passage. The AHP method are used, in this study, to identify the evaluation factors affecting the effectiveness of the present 367 wildlife passages in a mitigation measures to reduce road effects on wildlife species. Ten evaluation factors are derived from third levels in the AHP analysis. Priority setting to identify appropriate management strategies in first level is selected among four second levels on facility, environment, wildlife species and management tool. The AHP analysis suggested that neighboring environments are the most important factor at the second level, and passage structure, harmony with natural surroundings, wildlife occurrence and monitoring of the passage are also important factors at the third levels. In summary, effective measurements of wildlife passage management is based on managing the passage with neighboring topography and natural surrounding. This is useful to establish wildlife passage management strategy in order to reduce the negative effects of roads on wildlife species.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.5
• /
• pp.457-469
• /
• 2016

Nakdong river barrage was affected by artificial interference such as construction of port, industrial complex and estuary barrage. This change in Nadong river lead to environmental changes and affected the ability of barrier islands. Therefore, it is decided that the observation of changes in the Nakdong river estuary is very important. In this paper, the topographic change of the Nakdong river barrage observe based on Landsat TM, ETM+ images from 1984 to 2015. In addition, this study tried to conduct a comparative analysis on the area for change of sandy sediment according to tide level. This results could estimate height and volume about sandy sediment accumulated on the lower sand dune. Also, these results are expected to be the basis for prediction of the changing topography of the sand dune. The area of the average change in region 1,2,3 was calculated as 3,015m², 167,550m², 14,596m². This result is expected to be very useful for the continuous observation for sediment changes of Nakdong river.

• The Journal of Engineering Geology
• /
• v.12 no.2
• /
• pp.215-234
• /
• 2002

Groundwater Dam is one of the reliable techniques to get huge amount of groundwater abstraction for municipal, agricultural, drinking, industrial water supply system. It can be a major technique to solve water shortage problems when it based on the sufficient watershed, proper topology, and adequate aquifer distribution and pollution control, Groundwater Dam had initiated its construction by RDC(former KARICO) in early eighties in Korea and 4 of it in total were added more until late eighty. However, this technique has shrunken its application due to gradually decreased yield rate after sever years of construction. After we studied several existing sites precisely, we concluded that the main reason of decreasing yield rate was come form engineering roughness on construction in early nineties. Theoretically, the technique itself seemed to be little detectives however, there were a little application in the fields in Korea. With the recent advance in engineering fields, those defects in construction would be no longer obstacle to construct underground wall and the technique could be a one of major ground water production technique in the future. It is essential to study following items thoroughly before select the appropriate site. The topography and the site of the underground wall, aquifer distribution, the specific technique for wall construction to block groundwater flow effectively and strict quality control during construction are critical. The surface and ground water monitoring data should be collected. Sustainability of the Groundwater Dam with huge groundwater abstraction in long term should be based on the long-term water balance analysis for each site. The water quality, environmental effect analysis and maintenance achedule should be also analyzed and planned in prior. It is suggested that the two consecutive underground wall in the coastal area to prevent seawater intrusion beneath a single wall.

• Fire Science and Engineering
• /
• v.19 no.4 s.60
• /
• pp.75-79
• /
• 2005

This study has developed Forest Fire Occurrence Danger Index (FFODI) using fuel and topographical characteristics for the practical purposes of forecasting forest fire occurrence danger rating. This was made on the basis of the 126 forest fire site according to field survey. The result of fire frequency analysis showed 87 sites on conifer $(69\%)$, 21 on mixed $(16.7\%)$ and 18 $(14.3\%)$ on non-conifer. The scale for Fuel Model Index(FMI) ranges from 1 to 10 and Topography Model Index(TMI) from 1 to 5. FMI is 10 on the conifer, 3 on the mixed and 2 on the non-conifer. In case of topographical analysis, it was estimated that 90 site $(71.4\%)$ of ignition point was bottom foot hill and 22 site $(17.5\%)$ was on the southwest. TMI in southwest direction is 5.0, 4.5 in the northwest and the northeast, 4.0 in the southeast and the south, 2.5 in the north and the west and 1.5 in the east. TMI in the bottom foot hill is 5 in the bottom foot hill, 1.5 in the upper foot hill, 1.0 in the bottom middle slope and 0.5 in the upper middle slope and bottom ridge.

• Journal of agriculture & life science
• /
• v.46 no.3
• /
• pp.47-58
• /
• 2012

This study was carried out to develop assessment model for the optimal site prediction of Dendropanax morbifera, Evergreen broad-leaved trees in warm temperate zone according to climate change. It was created criterion for assessment model of the optimal site prediction by quantification method to possible analysis of quantitative and qualitative data, through study relationship between growth of tree and site environmental factors. A program of the optimal site prediction was developed using program version 3.2, an Avenue and Dialog Designer tool of ESRI as GIS(geographic information system) engine. Developed program applied to test accuracy of the optimal site prediction in study area of Wando, Jeollanam-do, having a various evergreen broad-leaved trees of warm temperate zone. In the results from analysis of the optimal site prediction on Dendropanax morbifera, the characteristics of optimal site were analyzed site environmental features with 401~500m of altitude, $15^{\circ}$ of slope, hillside of local topography, alluvium of deposit type, convex of slope type and south of aspect. The mapping area per grade of the optimal site prediction in the Dendropanax morbifera showed 1,487.2ha(25.4%) of class I, 1,020.3ha(17.4%) of class II, 2,231.8ha(38.2%) of class III and 1,110.5ha(19.0%) of class IV.

• Korean Journal of Remote Sensing
• /
• v.19 no.2
• /
• pp.117-133
• /
• 2003

A field survey and Landsat ETM+ image acquisition carried out simultaneously. Using these data, we attempted to establish relationships between tidal flat environmental factors and reflectance observed by ETM+, and to set up a new critical grain size useful for optical remote sensing. Although the grain size of 4 $\Phi$ has been conventionally used as a critical size by sedimentologists, the correlation with optical reflectance was very low. Instead, the grain size of 2 $\Phi$ showed a relatively high correlation coefficient, 0.699, with ETM+ band 4, except near tidal channels in upper tidal flat. We concluded that the grain size of 2 $\Phi$ would be better to use for a critical grain size in Gomso Bay. The grain size also correlated well with moisture content having a correlation coefficient of -0.811 when the 2 $\Phi$ criterion was used. The results of factor analysis showed moisture content was more important parameter than topographic relief, and they were different from German tidal flats in which topographic relief was the prior factor This can be explained by finer grain composition of the Gomso bay tidal flat. In short, moisture content and topography as well as grain size should be considered in tidal flat remote sensing.

• Journal of Korea Water Resources Association
• /
• v.52 no.10
• /
• pp.729-742
• /
• 2019

Natural disasters such as floods has been increased in many parts of the world, also Korea is no exception. The biggest part of natural damage in South Korea was caused by the flooding during the rainy season in every summer. The existing flood vulnerability analysis cannot explain the reality because of the repeated changes in topography. Therefore, it is necessary to calculate a new flood vulnerability index in accordance with the changed terrain and socio-economic environment. The priority of the investment for the flood prevention and mitigation has to be determined using the new flood vulnerability index. Total 25 urban districts in Seoul were selected as the study area. Flood vulnerability factors were developed using Pressure-State-Response (PSR) structures. The Pressure Index (PI) includes nine factors such as population density and number of vehicles, and so on. Four factors such as damage of public facilities, etc. for the Status Index (SI) were selected. Finally, seven factors for Response Index (RI) were selected such as the number of evacuation facilities and financial independence, etc. The weights of factors were calculated using AHP method and Fuzzy AHP to implement the uncertainties in the decision making process. As a result, PI and RI were changed, but the ranks in PI and RI were not be changed significantly. However, SI were changed significanlty in terms of the weight method. Flood vulnerability index using Fuzzy AHP shows less vulnerability index in Southern part of Han river. This would be the reason that cost of flood mitigation, number of government workers and Financial self-reliance are high.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.4
• /
• pp.328-334
• /
• 2019

Purpose: The aim of this study was to confirm if Laser-treated implants were soaked in 0.9% NaCl solution for 2 weeks could increase the surface hydrophilicity, and the Remoal Torque of each implant that inserted in rabbit tibia for initial healing period of 10 days. Materials and methods: Twenty machined titanium surface screws were produced with a diameter 3 mm, length 8 mm. Ten screws had their surface treated with a laser only (laser treated group), and the other 10 were soaked in saline for 2 weeks after surface treatment with a laser (laser treated + saline soaked group). Implants were inserted in rabbit tibia (ten adult New Zealand white rabbits), and the RTQ of each implant was measured after 10 days. The wettability among implants was compared by measuring the contact angle. Surface composition and surface topography were analyzed. Results: After 10 days, the laser treat + soaking group implants had a significantly higher mean RTQ than the laser treated implants (P = .002, < .05). There were no significant morphological differences between groups, and no remarkable differences were found between the two groups in the SEM analysis. Conclusion: Saline soaking implants is expected to produce excellent RTQ and surface analysis results.