• Journal of Forest and Environmental Science
• /
• v.3 no.1
• /
• pp.1-9
• /
• 1983

The purpose of this study was to elucidate the ecophysiological habitat of natural Sorbus commixta forest at Mt. Seorak. The results obtained were as follows: 1. The Sorbus commixta trees mainly distributed from 900m to 1,500m altitude. In there, the warm index(WI) was about 42$3.2{\times}10^3$ to $9.2{\times}10^3$, cation exchange capacity(CEC) was 13.7 to 19.5mg/100g, N content 0.21 to 0.39%, $P_2O_5$ content was 22.6 to 38.7ppm, and pH value was 5.6 to 5.8 respectively. 4. The upper crown trees in Sorbus commixta communities were Abies nephrolepis, Taxus cuspidata, Betula platyphylla var. japonica, Quercus${\times}$grosseserrata, Acer mono, Prunus sargentii, Carpinus cordata, Tilia amurensis, and the under crown trees were Rhododendron brachycarpum, Acer pseudo-sieboldianum, Thuja olientalis, Corylus heterohpylla, Philadelphus schrenckii, Rhododendron schlippenbachii, Rhododendron mucronulatum, and Magnolia sieboldii. 5. The stand densities were 1,156 trees/ha at 1,160m and 3,600 trees/ha at 1,300m respectively. The coverages by the DBH basal area were 0.37 at 1,160m and 0.31 at 1,300m respectively, and the vegetation coverages by the crown projection area were 2.04 at 1,160m and 1.61 at 1,300m respectively. 6. The light extinction coefficient(k) in Beer-Lambert's law, showed the distance, F(z), from top canopy to aboveground, was 0.17. 7. The water relations parameters of Sorbus commixta shoot were obtained by the pressure chamber technique. The osmotic pressure, ${\pi}_o$, at maximum turgor was -16.2 bar, and VAT pressure was 14.5bar. The osmotic pressure, ${\pi}_p$, at incipient plasmolysis was -19.4bar. The relative water contents at incipient plasmolysis were 83.1% ($v_p/v_o$) and 87.1%($v_p/w_s$;$w_s$, total water at maximum turgor). 8. The bulk modulus of elasticity(E) of shoot was about 69.6. The total symplasmic water to total water in shoot was 67.7%, and the apoplastic water to total water was 32.3%.

• Journal of Technology Innovation
• /
• v.23 no.4
• /
• pp.1-31
• /
• 2015

Korea has continuously increased investment on R&D to improve global technology competitiveness through technology innovation. Korea's R&D expenditure as a percent of GDP is world's No. 1 as 4.15 and it accomplished 1 trillion won trade volume for 4 consecutive years. However, despite these efforts, technology balance of payment, which is an important factor that can measure nation's technology competitiveness is in a state of chronic deficit and the lowest level among OECD countries. In this paper, we studied methods to improve Korea's technology balance of payment We figured out concept and current state of technology trade and examined the importance of technology trade through making a comparison between commodity trade and technology trade. There have been studies regarding technology trade, but there was no study which tried to figure out cognition on technology trade from the point of view of companies which plays an important role in technology trade. For this, this study distinguished companies with experience in technology trade and which have not and conducted a survey to figure out cognition and current state of companies. The survey result showed noticeable difference on cognition of top decision makers between companies with experience in technology trade and which have not and there are serious shortage in department and staff which is exclusively responsible for technology trade. Also, despite their needs for education regarding technology trade, the ratio of employees who received education is below 10 % of the total respondents. This study suggested improvement methods such as reforming survey methods of technology trade statistics, enhancing social cognition, supporting to vitalize technology export, building infrastructure regarding technology trade, and opening education programs for cultivating experts based on preceding research and industry survey.

• Journal of Intelligence and Information Systems
• /
• v.22 no.3
• /
• pp.129-142
• /
• 2016

Customer product reviews have become one of the important factors for purchase decision makings. Customers believe that reviews written by others who have already had an experience with the product offer more reliable information than that provided by sellers. However, there are too many products and reviews, the advantage of e-commerce can be overwhelmed by increasing search costs. Reading all of the reviews to find out the pros and cons of a certain product can be exhausting. To help users find the most useful information about products without much difficulty, e-commerce companies try to provide various ways for customers to write and rate product reviews. To assist potential customers, online stores have devised various ways to provide useful customer reviews. Different methods have been developed to classify and recommend useful reviews to customers, primarily using feedback provided by customers about the helpfulness of reviews. Most shopping websites provide customer reviews and offer the following information: the average preference of a product, the number of customers who have participated in preference voting, and preference distribution. Most information on the helpfulness of product reviews is collected through a voting system. Amazon.com asks customers whether a review on a certain product is helpful, and it places the most helpful favorable and the most helpful critical review at the top of the list of product reviews. Some companies also predict the usefulness of a review based on certain attributes including length, author(s), and the words used, publishing only reviews that are likely to be useful. Text mining approaches have been used for classifying useful reviews in advance. To apply a text mining approach based on all reviews for a product, we need to build a term-document matrix. We have to extract all words from reviews and build a matrix with the number of occurrences of a term in a review. Since there are many reviews, the size of term-document matrix is so large. It caused difficulties to apply text mining algorithms with the large term-document matrix. Thus, researchers need to delete some terms in terms of sparsity since sparse words have little effects on classifications or predictions. The purpose of this study is to suggest a better way of building term-document matrix by deleting useless terms for review classification. In this study, we propose neutrality index to select words to be deleted. Many words still appear in both classifications - useful and not useful - and these words have little or negative effects on classification performances. Thus, we defined these words as neutral terms and deleted neutral terms which are appeared in both classifications similarly. After deleting sparse words, we selected words to be deleted in terms of neutrality. We tested our approach with Amazon.com's review data from five different product categories: Cellphones & Accessories, Movies & TV program, Automotive, CDs & Vinyl, Clothing, Shoes & Jewelry. We used reviews which got greater than four votes by users and 60% of the ratio of useful votes among total votes is the threshold to classify useful and not-useful reviews. We randomly selected 1,500 useful reviews and 1,500 not-useful reviews for each product category. And then we applied Information Gain and Support Vector Machine algorithms to classify the reviews and compared the classification performances in terms of precision, recall, and F-measure. Though the performances vary according to product categories and data sets, deleting terms with sparsity and neutrality showed the best performances in terms of F-measure for the two classification algorithms. However, deleting terms with sparsity only showed the best performances in terms of Recall for Information Gain and using all terms showed the best performances in terms of precision for SVM. Thus, it needs to be careful for selecting term deleting methods and classification algorithms based on data sets.

• Korean Journal of Soil Science and Fertilizer
• /
• v.21 no.2
• /
• pp.183-193
• /
• 1988

The relationship between the sulfur fertilization, and the quality and yield of garlic was investigated. The garlic was grown in pot and field at the five fertilization levels of sulfur. The growth characteristics, yield and flavour components of the garlic were studied. The results were summarized as follows; 1. The sulfur applications contributed to a weight and yield of the bulb in SP-10 (10kg/10a) and SF-20 (20kg/10a) significantly, respectively. 2. From the volatile oil obtained by steam distillation of garlic, fourteen organie sulfur components were separated, identified and quantified by GC and GC/MASS and the SP-10 and SF-20 were higher in the concentration of the flavour components in the volatile oil than other treatments. 3. It is considered that the organic sulfur components were synthesized in the top and transported to the bulb of the garlic. 4. In conclusion, SF-20, 20kg/sulfur per 10a, could be recommended to get maximum yield and a good quality of garlic in view of evaluation through the contents of organic sulfur components in the volatile oil and the yield of the bulb.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.4
• /
• pp.16-21
• /
• 2017

In this paper, a Small-sized and planer resonator design of Magnetic Resonance - Wireless Power Transfer(MR-WPT) were proposed for practical applications of mobile devices, such as a laptop, a smart-phone and a tablet pc. The proposed MR-WPT system were based on four coil MR-WPT and designed as a transmitter part (Tx) and a receiver part (Rx) both are the same shape with the same loop and resonator. There are four different spiral coil type of resonators with variable of line length, width, gap and turns in $50mm{\times}50mm$ size. The both of top and bottom side of substrate(acrylic; ${\varepsilon}_r=2.56$, tan ${\delta}=0.008$) ere used to generate high inductance and capacitance in limited small volume. Loops were designed on the same plane of resonator to reduce their volume, and there are three different size. The proposed MR-WPT system were fabricated with two acrylic substrate plane of Tx and Rx each, the Rx and Tx loops and resonators were fabricated of copper sheets. There are 12 combinations of 3 loops and 4 resonators, each combination were measured to calculate transfer efficiency and resonance frequency in transfer distance from 1cm to 5cm. The measured results, the highest transfer efficiency was about 70%, and average transfer efficiency was 40%, on the resonance frequency was about 6.78 MHz, which is standard band by A4WP. We proposed small-sized and planer resonator of MR-WPT and showed possibility of mobile applications for small devices.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.5
• /
• pp.121-131
• /
• 2015

Village-concentrated agricultural regional development projects that aim for increased profits are now being aimed at core agricultural and fishing areas. These agricultural and fishing stimulus projects aim to not only increase the net profit of local citizens but also improve their living conditions. As the industry itself has changed, local rural areas have also changed in various ways. One such aspect is the emergence of rural-urban complexes known as "rurban" areas. These naturally occurring rurban regions are created by a combination of complex urban infrastructure while maintaining the insulated rural communities that agricultural areas are usually so readily identified by. "Jeongeupsi Naejangsnagdong", the target of this research, also specifies the unaltered surrounding natural environment of rural areas while at the same time containing complex central living areas typically found in urban areas. This research suggests that the direction of residents' participation in community-level rurban projects could solve the problems found in existing top-down government development projects. This research also suggests rurban area activation plans to improve living conditions through analysis of both local rurban agricultural characteristics and citizen demands. In order to encourage citizen autonomy and self-governing attitudes, citizen-strengthening workshop programs are proposed, such as citizen workshops or pilot activities. This research was carried out by target area analysis, rudimentary planning, development direction setting, detailed project planning, and finally project processing. This procedure established three goals, which are walking environment improvement, community infrastructure establishment, and good living environment establishments, based on actual site research and citizen demands. This research suggests plans to activate community groups that were already established and reflect citizen needs as the main avenues for local businesses. This research is predicted to promote more active and successful growth through autonomy in stimulating these increasingly emerging rurban agricultural regions.

• Journal of Nutrition and Health
• /
• v.51 no.5
• /
• pp.480-487
• /
• 2018

Purpose: The study examined the Chinese and Japanese consumers' preference for Korean home meal replacement (HMR) product package designs using conjoint analysis. Methods: The questionnaire survey was completed by 270 consumers living in Beijing, China and Osaka, Japan, over the age of 20 years old, who had previously purchased or consumed a Korean HMR. Based on the attributes and levels within each attribute related to the Korean HMR product package design, 54 profiles were constructed. Of the 54 profiles, 11 combinations were selected using an orthogonal design, and the participants were asked to rank the 11 combinations in order of preference from top to bottom. Results: The relative importance of the Korean HMR product package design attributes were analyzed. Chinese consumers regarded illustration, ingestion form, concept, and brand name, in that order, to be most important. In the case of Japanese consumers, illustration, concept, ingestion form, and brand name, in that order, were most important. For the illustration attributes, in order of importance, Chinese consumers preferred raw materials, characters, and celebrities, and Japanese consumers preferred characters, raw materials, and celebrities. For the concept attributes, Chinese consumers favored, witty, traditional Korean, and modern concepts, whereas Japanese consumers favored witty, modern, and then traditional Korean concepts. For the ingestion form attributes, both Chinese and Japanese consumers preferred Ready To Eat (RTE), followed by Ready To Heat (RTH), and then Ready To Cook (RTC). For the brand name attributes, both Chinese and Japanese consumers preferred the localized brand name over the Korean brand name. Conclusion: Differences in the relative importance of Korean HMR product package design attributes were observed among Chinese and Japanese consumers, and there were differences in preference according to the levels within each attribute. These results are expected to provide useful basic data to assist in the future development of differentiated HMR package designs and marketing strategies to meet consumer needs in the market for Korean HMR in China and Japan.

• Journal of Venture Innovation
• /
• v.2 no.2
• /
• pp.31-46
• /
• 2019

Materials and Parts acts as the bridge in the manufacturing industry. In 2018, the materials and parts industry became the leading industry in Korea as its export reached $316.2 billion, accounting for 52.3 percent of the country's total exports. As such, it is the main industry of Korea leading the trade surplus, but when it comes to Japan, it is not. The trade deficit with Japan shrinks to $24 billion last year but the materials and parts industry still accounts for 60 percent of total deficit, which is about $15.1 billion. Today Japan has the top competitiveness in the high-tech materials and parts industry and the factors can be found in cooperation and symbiosis among companies, monotsukuri spirit, and long-term government policy. In order for Korean economy to pursue the Japan's high-tech materials and parts industry, the following change of perception is necessary. First, the material and parts industry requires win-win cooperation. In general, materials and parts are intermediate products. Therefore, it is important to understand the characterist that the transactions are all made up between companies not the with consumers. Second, expansion of joint technology development is absolutely necessary. South Korea is a leading country in the field of general-purpose materials and parts. However, the research shows that South Korea has structure which small and medium-sized companies could have difficulties in developing high-tech products as finding demand and developing market are hard due to low participation of large corporations at R&D stage. It is necessary for large corporations to participate in joint R&D and share opinions of customers from the beginning stage of R&D. Third, a long-term approach is needed. Structural vulnerabilities in the Korea's materials and parts industry, including the lack of advanced technologies is the main reason of solidification of Korea's trade deficit with Japan but there are also cultural differences about technology in the background. Even if it takes time, a long-term approach is absolutely necessary to build up technology and know-how in order to secure competitiveness in the high-tech materials and parts industry. This approach applies to act of corporation and government policy.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.3 no.4
• /
• pp.1-41
• /
• 2008

The Korean semiconductor industry has made a great contribution to growth of Korean economy for the last decades by maintaining a top position in terms of Korean total annual export volume. However, the advanced semiconductor equipment and materials that are used for the production of semiconductor devices still depend on the suppliers from Europe, Japan, and America who have an influential position in the Korean semiconductor industry. The objective of this study is to empirically investigate the attributes determining the extent of autonomy in decision making for the Korean subsidiaries of multinational corporations in the semiconductor industry. This study found there were differences in the extent of autonomy in decision making in terms of the global strategies the multinational corporations pursue. This study surveyed employees at the Korean subsidiaries and joint venture companies of semiconductor multinational corporations and collected 726 survey questionnaires. Several statistical analyses including frequency analysis, reliability analysis, factor analysis, multiple regression analysis and ANOVA were performed using the collected sample data. Based on the analyses, this study found as follows: Firstly, from the factor analysis, this study found Korean subsidiaries faced three sources of uncertainties stemmed from political conditions, competent conditions, demand and supply conditions. The internal resources were characterized by the independencies of production capability, financial capability, marketing capability and human resource management capability. The operational performance was determined by total revenue, net profit and market share growth. Secondly, it was found the uncertainties from political condition and competent condition and the independencies of financial capability and marketing capability partially influenced the extent of autonomy in decision making. The independencies of production capability and human resource management capability significantly influenced the autonomy of decision making in the most areas. It was also found an increase of total revenue, net profit and market share growth partially affected the extent of autonomy in decision making of the Korean subsidiaries. Finally, it was found that the polycentrism of global management by multinational corporations seemed to bring a higher extent of autonomy in decision making than ethnocentrism or geocentrism of global management. Based on the results, this study provided managerial implications regarding the extent of autonomy in decision making for Korean subsidiaries of multinational corporations in order to help management to enhance their business capabilities.

• Korean journal of communication and information
• /
• v.53
• /
• pp.29-52
• /
• 2011

The purpose of this study is to explore the influence exerted by integration of newsroom upon creation, organization, and operation of news, efficiency during the process of creating news, and the qualitative level of journalism. This study has also utilized a quantitative and qualitative survey method that compares the results of survey on perception of media personnel with the results of case studies. The survey on perception is based on a questionnaire survey separately conducted on changes to organizational operation after integration among executives of top 170 newspapers in USA selected based on circulation. The details of survey include the influence of 1) Change in the system of news coverage and reporting, 2) Qualitative change to journalism, and 3) The differing backgrounds of constituent members upon operation of the integrated newsroom. Moreover, to find out whether the quantitative index shown by the perception survey is actually reflected on the media which operates an integrated newsroom, this study has conducted an in depth interview with related personnel of New York Times and Media General in USA, TMG of UK, Nordjyske of Denmark, and CBS in Korea and also engaged in literature survey. The results of the surveys are as follows. First, this study found that unlike the assertions of many earlier studies, integration of the newsroom generally exerts positive influence upon the organizational operation of a media corporation. Second, after integration, inefficiency of the past for the organization in general including coverage and reporting system, communication within and outside the organization, output of journalists, etc. decreased, and synergistic effect was created. Third, integration of the newsroom generally exercised positive influence upon enhancing the qualitative level of journalism. Fourth, while the current personnel of media generally offered positive assessment of integrating constituent members of differing backgrounds as one newsroom, the case study also showed that there are many negative aspects to it.