• Journal of Periodontal and Implant Science
• /
• v.47 no.1
• /
• pp.51-63
• /
• 2017

Purpose: Following tooth extraction, alveolar ridge preservation (ARP) can maintain the dimensions of ridge height and width. Although previous studies have demonstrated the effects of ARP, few if any studies have investigated the compressive force applied during grafting. The aim of this study was to determine the effects of different compressive forces on the graft materials during ARP. Methods: After tooth extraction, sockets were filled with deproteinized bovine bone mineral with 10% porcine collagen and covered by a resorbable collagen membrane in a double-layered fashion. The graft materials were compressed using a force of 5 N in the test group (n=12) and a force of 30 N in the control group (n=12). A hidden X suture was performed to secure the graft without primary closure. Cone-beam computed tomography (CBCT) was performed immediately after grafting and 4 months later, just before implant surgery. Tissue samples were retrieved using a trephine bur from the grafted sites during implant surgery for histologic and histomorphometric evaluations. Periotest values (PTVs) were measured to assess the initial stability of the dental implants. Results: Four patients dropped out from the control group and 20 patients finished the study. Both groups healed without any complications. The CBCT measurements showed that the ridge volume was comparably preserved vertically and horizontally in both groups (P>0.05). Histomorphometric analysis demonstrated that the ratio of new bone formation was significantly greater in the test group (P<0.05). The PTVs showed no significant differences between the 2 groups (P>0.05). Conclusions: The application of a greater compressive force on biomaterials during ARP significantly enhanced new bone formation while preserving the horizontal and vertical dimensions of the alveolar ridge. Further studies are required to identity the optimal compressive force for ARP.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.39
• /
• pp.29.1-29.5
• /
• 2017

Background: The surgical extraction of the third molar is the most frequently encountered procedure in oral and maxillofacial surgery and is related with a variety of complications. This study examined the efficacy of intentional partial odontectomy (IPO) in the third molars which have no periapical lesions and are located near important anatomical structures such as inferior alveolar nerve. Methods: Seven patients (four males, three females, $39.1{\pm}11.6years$), who received IPO to reduce the risk of inferior alveolar nerve injury (IANI), were followed long-term. The treated teeth were horizontally impacted third molars in the mandibular left (n = 5) or mandibular right (n = 4) areas and were all ankylosed with the surrounding alveolar bone. During the IPO, the bone around the crown was removed to expose the crown, and then the tooth was resected at cement-enamel junction (CEJ). Any secondary trauma to the healthy root was minimized and remained intact after primary suture. Results: The mean follow-up time was $63.2{\pm}29.8months$, and all sites showed good bone healing after the crown removal. Also, sensory abnormality was not found in any patients after IPO. In one patient, the bone fragments erupted 4 months after IPO. In other patient, an implant placed on second molar site adjacent to the third molar that received IPO was explanted about 2 years after the patient's persistent discomfort. Conclusions: In case where high risk of IANI exists, IPO may be chosen alternatively to surgical extraction to reduce the risk of nerve damage.

• Journal of Periodontal and Implant Science
• /
• v.38 no.3
• /
• pp.521-528
• /
• 2008

Purpose: Tunneling is a periodontal surgical procedure that creates access for patient cleansing and maintenance within the furcal area of a molar tooth with severe furcation involvement. Up to date, there are few studies about a long term clinical and radiographic stability of tunneling. The purpose of this retrospective study is to evaluate the long term prognosis after tunnel preparation of molars with through and through furcation. Material and Methods: 25 teeth of 23 patients aged 36 to 70 (mean age 51.7) were treated surgically with tunnel preparation. These cases were followed for 2 to 13 years (mean 6.5years) after surgery. Patients were recalled for an evaluation which was based on a questionnaire, a clinical examination, and radiographic analysis. Clinical assessment included plaque index, caries registration, probing pocket depth, bleeding on probing, tooth mobility. Baseline and over 2-year follow-up radiographs were collected and evaluated for this study. Result: 3 teeth(12%) had been extracted and 1 tooth(4%) hemisected. Root caries was detected in 3 teeth(12%). Thus 72% of the teeth were still caries tree and in function. Clinical parameters including PI, PD, BOP, mobility showed somewhat favourable results. Radiographic furcal bone loss showed no statistically significant difference compared to interproximal crestal bone loss ($3.59{\pm}1.69%$ vs $3.42{\pm}2.95%$) when root length was used as reference. There was no correlation between root trunk length and furcal bone loss. Conclusion: Over 2 years after tunneling procedure, teeth showed a clinically and radiographically stable condition, despite of slight root caries and alveolar bone loss within clinically acceptable range. The tunnel procedure may be considered as a viable periodontal treatment option for molar teeth with severe furcation involvement in individuals following a regular maintenance program.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.39 no.1
• /
• pp.1-8
• /
• 2023

Purpose: The purpose of this study is to analyze the prognostic factors related to tooth loss after 5 years of periodontal surgery in periodontal disease patients. Materials and Methods: From January to December 2017, 22 patients and 124 teeth who underwent periodontal treatment through periodontal surgery were targeted. At the time of treatment, the measured values were evaluated after recording the maximum probing depth, average periodontal probing depth, number of root, furcation involvement, pulp vitality, and prosthesis state on the day of periodontal surgery. Based on the initial records at the time of visit, patient-related factors were gender, age, smoking, tooth loss due to periodontal disease at the time of first visit, diabetes, and maintenance period. The influence of each factor on tooth loss was evaluated. Results: As a result of examining the influence of tooth-related factors on tooth loss, the maximum probing depth depth (P: 0.000), bone loss (P: 0.021) was found to have a significant effect on tooth loss. Conclusion: As a result of examining the influence of patient-related factors on tooth loss, any variables had no significant effect. Bone loss, maximum probing depth acted as statistically significant prognostic factors for tooth loss in patients who underwent periodontal surgery.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.35 no.2
• /
• pp.112-119
• /
• 2009

Extracellular matrix(ECM) is known to function as a reservoir of endogenous growth factors, can be an effective delivery system of growth factor that easily lost bioactivity in solution. Fibrillar collagens like type I collagen, are the major constituent of the ECM and structural protein of bone. Also, it can be a scaffold for osteoblast migration. The purpose of this study was to compare the effects of absorbable Atelo-collagen Sponge($Teruplug^{(R)}$) insertion in tooth extraction sites on periodontal healing of the mandibular second molar after the extraction of the impacted third molar. The study population comprised 31 cases who had been scheduled for surgical removal of impacted mandibular third molars. All patients were in good general health and were not using any medication that would influence wound healing after surgery. In 15 cases control group, none was inserted into the tooth extraction site. In 16 cases experimental groups, $Teruplug^{(R)}$ was inserted into the tooth extraction site. We evaluated tooth mobility, pocket depth, gingival margin level preoperatively and 1 week, 2 weeks, 4 weeks, and 3 months postoperatively. The change was compared with two groups using Mann-Whitney test. The results were as follows. 1. There was no significant change of tooth mobility on both groups. 2. There was tendency of decreasing of previous pocket depth causing tooth extraction on both groups. 3. On gingival margin level, there was various change according to initial swelling and loss of attachment on both groups. 4. There was tendency of decreasing of gingival margin level on both groups because of removal of inflammation and decreasing of previous pocket depth. 5. There was large change of pocket depth on buccal middle, distal, lingual distal area because of tooth extraction and bone reduction. Compared with the control group and experimental group, we observed significant difference during some periods. The results of this study suggest that absorbable atelo-collagen sponge($Teruplug^{(R)}$) is relatively favorable bone void filler with prevention of tissue collapse, food packing and enhance periodontal healing.

• Journal of Periodontal and Implant Science
• /
• v.32 no.1
• /
• pp.1-12
• /
• 2002

The periodontal ligament(PDL) is a unique tissue that is crucial for tooth function. However, little is known of the molecular mechanisms controlling PDL function. PDL-specific protein;PDLs22 had been previously identified as a novel protein isolated from cultured human PDL fibroblasts using subtraction hybridization between human gingival fibroblasts and PDL fibroblasts. The aim of this study was to examine the expression pattern and tissue localization of PDLs22 protein in embryonic and various postnatal stages of developing mouse using immunohistochemical staining. Embryos (E18) and postnatal (P1, P4, P5, P15, P18) were decapitated and the heads were fixed overnight in a freshly prepared solution of 4% paraformaldehyde. Some specimens were decalcified for $2{\sim}4$ weeks in a solution containing 10% of the disodium salt of ethylenediamine-tetraacetic acid (EDTA). Next, tissues were dehydrated, embedded in paraffin and sectioned serially at $6{\mu}m$ in thickness. Polyclonal antiserum raised against PDLs22 peptides, ISNKYLVKRQSRD, were made. The localization of PDLs22 in tissues was detected by polyclonal antibody against PDLs22 by means of immunohistochemical staining. The results were as follows; 1. Expression of PDLs22 protein was not detected in the tooth germ of bud and cap stage. 2. At the late bell stage and root formation stage, strong expression of PDLs22 protein was observed in developing tooth follicle, osteoblast-like cells, and subodontoblastic cells in the tooth pulp, but not in gingival fibroblasts, ameloblasts and odontoblasts of tooth germ 3. In erupted tooth, PDLs22 protein was intensely expressed in PDL and osteoblast-like cells of alveolar bone, but not in gingival fibroblasts, mature osteocytes and adjacent salivary glands. 4. In the developing alveolar bone and mid-palatal suture, expression of PDLs22 protein was seen in undifferentiated mesenchymal cells and osteoblast-like cells of developing mid-palatal suture, but not in mature osteocytes and chondrocytes. These results suggest that PDLs22 protein may play an important role in the differentiation of undifferentiated mesenchymal cells in the bone marrow and PDL cells, which can differentiate into multiple cell types including osteoblasts, cementoblasts, and PDL fibroblasts. However, more researches should be performed to gain a better understanding of the exact function of PDLs22 protein which related to the PDL cell differentiation.

• The Journal of Korean Academy of Prosthodontics
• /
• v.36 no.6
• /
• pp.867-877
• /
• 1998

The purpose of this study was to investigate the ideal locations and dimensions of bristles for the patients who were installed with fixed prostheses and severely involved periodontitis. The models of 16 pts were analysed and the resullts were as follows: 1. There were no tooth brushes in the market, which were proper for the patients who were installed with fixed prostheses and had severely periodontally involved teeth. 2. The neck portion of the tooth brush should be narrow as possblly. 3. The size of tooth brush should be analyzed by the size of arch. 4. The width of tooth brush should be analyzed by the degree of bone recession. 5. The custom made tooth brush may be ideal, if possible.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1198-1201
• /
• 2004

To investigate the bone remodeling phenomenon around screw tooth of the implant for osteointegration, a finite element model of the screw was developed. Strain energy density was chosen for the indicator for remodeling process. The modified mathematical equation for remodeling process was applied to 2-dimensional tibia and implant model under static bending state Caculated results show reliable remodeling process compared with histology data.

• Restorative Dentistry and Endodontics
• /
• v.41 no.3
• /
• pp.182-188
• /
• 2016

Objectives: The purpose of this study was to evaluate the proximity of the mandibular molar apex to the buccal bone surface in order to provide anatomic information for apical surgery. Materials and Methods: Cone-beam computed tomography (CBCT) images of 127 mandibular first molars and 153 mandibular second molars were analyzed from 160 patients' records. The distance was measured from the buccal bone surface to the root apex and the apical 3.0 mm on the cross-sectional view of CBCT. Results: The second molar apex and apical 3 mm were located significantly deeper relative to the buccal bone surface compared with the first molar (p < 0.01). For the mandibular second molars, the distance from the buccal bone surface to the root apex was significantly shorter in patients over 70 years of age (p < 0.05). Furthermore, this distance was significantly shorter when the first molar was missing compared to nonmissing cases (p < 0.05). For the mandibular first molars, the distance to the distal root apex of one distal-rooted tooth was significantly greater than the distance to the disto-buccal root apex (p < 0.01). In mandibular second molar, the distance to the apex of C-shaped roots was significantly greater than the distance to the mesial root apex of non-C-shaped roots (p < 0.01). Conclusions: For apical surgery in mandibular molars, the distance from the buccal bone surface to the apex and apical 3 mm is significantly affected by the location, patient age, an adjacent missing anterior tooth, and root configuration.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.34 no.3
• /
• pp.186-199
• /
• 2012

Purpose: Single implants, of which screw loosening has been observed frequently, presents problems such as fixtures fractures, marginal bone loss, and inflammation of the soft tissue around the implant. However, the single implant is more conservative, cost effective, and predictable compared to the 3 unit bridge with respect to the long-term outcome. This study evaluated the survival rate as well as future methods aimed at increasing the survival rate in single implants in posterior teeth. Methods: Among the implants placed in the Dankook University Dental Hospital department of Oral & Maxillofacial surgery from January 2001 to June 2008, 599 implants placed in the maxillar and mandibular posterior were evaluated retrospectively. Survival rates were investigated according to implant location, cause of tooth loss, gender, age, general disease, fixture diameter and length, surface texture, implant type and shape, presence of bone graft, surgery stage, surgeons, bone quality and opposite teeth. Results: Out of 599 single implants in posterior teeth, 580 implants survived and the survival rate was 96.8%. The difference in survival rate was statistically significant according to the implant location. The survival rate was low (84.2%) in implants exhibiting a wide diameter (${\geq}5.1mm$) and the surface treated by the acid etching group demonstrated a significantly lower survival rate (91.1%). One stage surgical procedure, which implemented a relatively better bone quality survival rate (100%), was higher than the two stage surgical procedure (96.1%). The survival rate of type IV bone quality (75%) was significantly lower than the other bone quality. Conclusion: Single posterior teeth implant treatments should use an improved surface finishing fixture as well as careful and safe procedures when performing implant surgery in the maxilla premolar and molar regions since bone quality is poor.