• 한국기계가공학회지
• /
• 제11권3호
• /
• pp.80-85
• /
• 2012

The ultrasonic cutting method is which cutting by applying high frequency vibrational energy into specific area at constant pressure. Ultrasonic cutting is consisted of power supply, transducer, booster and cutting tool. Precise designing is required since each part's shape, length and mass can affect driving frequency and vibration mode. This paper focused to cutting tool design, its length L was set by calculating vibration equation. And the value of the shape parameter a was diversified as the integral multiple and the result of 40,189Hz the analysis of Modal was shown in the length 30mm of the result of performance b in the 11th mode Also by performing harmonic response analysis, the frequency response result was 40,189Hz, which was similar to modal analysis result.

• Design & Manufacturing
• /
• 제2권2호
• /
• pp.43-47
• /
• 2008

This paper is concerned with the analysis of material flow characteristics of stepped rod forming. The analysis in this paper concentrated on the evaluation of the design parameters for deformation patterns of tube forming, load characteristics, extruded length, and die pressure. The design factors such as punch nose radius, die corner radius, friction factor, and punch face angle are involved in the simulation. The stepped rod forming is analyzed by using a commercial finite element code. This simulation makes use of stepped rod material and punch geometry on the basis of punch geometry recommended by International Cold Forging Group. As radius ratio is large, forming load was reduced but extruded length ratio was increased.

• 인지과학
• /
• 제29권1호
• /
• pp.17-38
• /
• 2018

본 연구의 목적은 도구를 사용하더라도 닿지 않는 거리에 놓인 대상에서 도구 길이에 따라 지각된 거리가 상이한 정도로 압축되는지, 그리고 가리키는 대상에서만 도구 길이에 따라 지각된 거리가 압축되는지를 검증하는 것이다. 자기중심적 거리를 측정한 실험 1은 도구를 사용하여 닿지 않는 거리에 놓인 대상에서도 도구 길이가 길어질수록 대상까지의 거리를 더 가깝게 지각한다는 것을 발견하였다. 자기중심적 거리를 측정한 실험 2는 가리키는 대상과 가리키지 않는 대상이 시야에 공존할 때 도구 길이가 가리키지 않는 대상까지의 거리 지각에 영향을 미치지 않는다는 것을 발견하였다. 실험 3은 실험 2와 동일한 환경에서 표적과 측정 대상 사이의 거리인 대상중심적 거리를 측정하여 도구 길이가 표적의 거리지각에만 영향을 미친다는 것을 발견하였다. 이와 같은 실험 결과는 도구를 사용하여 닿을 수 없는 거리에서도 지각된 거리의 압축 현상이 나타나며 이와 같은 지각된 거리의 압축 현상은 가리키는 대상에 국한된다는 것을 시사한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.425-426
• /
• 2008

• 한국재료학회지
• /
• 제18권12호
• /
• pp.635-639
• /
• 2008

In this paper, experimental studies of the regrinding of tungsten carbide (WC-Co) tools for high-speed machining were conducted. Regrinding and a subsequent evaluation test were carried out for a flat endmill tool with diameters of 10 mm and 3 mm using a CNC five-axis tool grinder and a CNC three-axis machining center. Tool wear on the two types of endmill tools increased as the cutting length increased, and the tool wear was not influenced by the regrinding state. In case of the micro endmill with a tool diameter of 3 mm, the effective regrinding time was determined for a flank wear threshold of 0.3 mm considering the tool life according to cutting length. The tool lives of the 10 mm and 3 mm endmill tools were increased by 80% and 72%, respectively. This conclusion proves the Feasibility of the recycling of tungsten carbide materials in the high-speed machining of high-hardened materials for industrial applications.

• 대한기계학회논문집
• /
• 제12권5호
• /
• pp.1055-1062
• /
• 1988

본 연구에서는 역학모델을 이용해 공구마멸 특성을 절삭속뿐만 아니라 공구와 유리섬유의 접촉길이에 대해서도 논하고, 이 결과와 실험결과를 대비 검토하였다. 또 몇 가지 공구재종으로 절삭성능을 측정하였다.

• 한국산업융합학회 논문집
• /
• 제5권3호
• /
• pp.201-208
• /
• 2002

The machine tool which operates by hand is replacing by CNC machine tool to improve the quality of the product and the productivity in modem mechanic industry. The precision of machine part is influenced greatly the surface roughness by cutting condition of machine tool. So this study was performed to examine the aluminium surface roughness of section according to change of strength rating, nose radius, cutting speed, using live center. The results of this study are as follows; 1. In the case of 56mm diameter of test piece(length is below triple of diameter), whether establish the live center or not, doesn't influence to the surface roughness, and it is possible to make product without the live center. 2. The average surface roughness of 42mm diameter(length is quadruple of diameter) is similar to the 56mm diameter in the cutting condition of nose radius 0.8mm and cutting speed 140mm/min, but there are increases and differences in other cutting conditions. 3. In the case of test piece length more 70m/min(140m/mm) and nose radius improved greatly using the live center. 4. In the case of test piece length is quintuple of diameter, the nose radius must choose big tool and increase the cutting speed in preference live center establishment availability to improve that is surface roughness. Conclusively, if aluminum test piece length is fewer than triple of diameter, can process without establishing live center. If aluminum test piece length is more than quintuple of diameter, cutting conditions to improve surface roughness are (1) cutting speed (2) nose radius (3) whether the live center uses or not.

• 한국군사과학기술학회지
• /
• 제16권3호
• /
• pp.255-259
• /
• 2013

To evaluate the suitability of the Weaponeering tool for the Surface to Surface Guided Missile at the Above-Ground Buildings, we analyzed the relation among SSPD, $MAE_{bldg}$, CEP and the number of missiles, expected damage etc.. According to the analysis, if the target Length is 100m, and $\sqrt{MAE_{bldg}}$ is longer than the target length, the tool is suitable but shorter than it, the tool is not suitable. So Morris Driels's Weaponeering Tool needs new adaptive algorithm to Translate as the Target size and $MAE_{bldg}$.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.128-133
• /
• 2001

For the Z-level machining, a tool-path linking procedure is presented. The linking problem is approached from the technological requirements, such as considering the machining constraints among the tool-path-elements, minimizing the tool-path length and reflecting the oneway/zigzag linking option. To simplify the linking problem, we develop a data structure, called a TPE-net, providing information on the machining constraints among the tool-path-elements. By making use of the TPE-net, the tool-path linking problem becomes a touring problem so that every node has been traversed.

• 대한기계학회논문집
• /
• 제12권2호
• /
• pp.252-261
• /
• 1988

본 연구에서는 강의 2차원 적삭실험을 행하고 칩의 두께측정으로부터 구한 전단각 해에 의한 전단각 값의 비교를 통하여 이들 전단각 해의 한계성을 고찰하였으며,Zorev에 의한 제한된 전단과정과 마찰과정의 상호 의존성에 입각한 정역학적인 평형조건 과 공구경사면에 작용하는 응력분포의 가정하에서 전단각.PHI.의 새로운 해를 유도하고 이의 실현성을 검토하였다.