• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.675-681
• /
• 2002

Parametric modeling and configuration design method are a important methods for rapid design in manufacturing. This paper proposes a relation rules which parametrically models a bonnet trimming tool based on Pro/Engineer. The concept of desogn is applied a trimming die of the bonnet outer panel. Trimming die have a many parameters. Each a parameter is related the die face and punch profile. A design system consists of a Pro/Engineer, a Pro/program.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1424-1428
• /
• 2004

A new design for deburring tools for intersecting holes is introduced. The tool tip is mounted on a slender cantilever assembled into a circular shank. The tool tip has been design to cover ranges of exit angle and diameter ratio between intersecting holes. The design is an improvement over the previous ones by the authors. Experiments have been performed on AL6061. With the new design, mild exit burrs with exit angles greater than 45$^{\circ}$ are successfully removed. For large burrs with smaller exit angles, however, the deburring could be incomplete.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.419-419
• /
• 2000

This paper describes a requirement analysis for automotive engine design using a computer aided systems engineering tool RDD-100. Because the engine is a complex system with many subsystems, there are many needs of stakeholder throughout the life-cycle of the engine. The originating requirements have been derived from the needs and decomposed into leaf-node requirements with the tool. Many requirement errors have been detected during the decomposition process and resolved by modifying the requirements. Inconsistency problems have been also resolved with the tool, Analysis of engine requirements using RDD-100 brings clarity to engine design early in the development process.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.264-268
• /
• 2003

Recently reduction of industrial products in size and weight has been increased by application of micro-drills in gadgets of high precision and a great interest of a micro-drilling has been raised. Due to the lack of tool stiffness and the chip packing, the micro-drilling requires not only the robust tool structure which has not affected by vibration but also effective drilling methods designed to prevent tool fracture from cutting troubles. This paper presents an optimum design shape of a 0.15 mm micro-drill associated with a new manufacturing process to improve the production rate and to lengthen the tool life and suggestions on the micro-drilling characteristic properties associated with the tool life and workpiece quality.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.9 no.1
• /
• pp.31-40
• /
• 2009

This study is intended to suggest methodologies in theory that is dedicated to improve existing features in BlM tool sets and introduce a new horizon for developing new features in the future so that more functionality can be provided to the work process of architect. To be more utilized of BlM tool sets in a useful way, it is important to make sure to program a calculation method used in the design process which is based on the information provided by architect, such as design item with detailed process and transformed parametric information on warranty data. Finding pros and cons in the usability from the well-known 3D modeling applications and taking highly usable UI features from the existing applications, and using a common wording were carried out. Design architect identifies reusable parametric information and then finds an algorithm between each items so that BlM tool sets can contribute to design field in the future. Therefore, the formula has been developed for the items considering business aspects and architecturing size in the preliminary-design, and design aspects in the schematic design with idendifying inputs and outputs that is necessary to become fixed factors.

• Archives of design research
• /
• v.21
• /
• pp.29-38
• /
• 1997

DTP is an innovation of publishing arts act up to the social environmental change followed by the development of the computer and using a word processer. which makes us more convenient and economical. beside. consumer's various desires for design. DTP is getting more practical owing to convenience and economization. but. There is a limit on creativity by the typical working environment. Especially. A convenient tool environment has reduced the field of creativity on account of its consistency with only solving design problems. Result of study. The tool environment has rapidly improved in working environment and process compared with the handwork editing in the past. Particularly. Accidental creations caused by the computer program probably could narrow down the idea world with consistency which is expressed as a pleasure creation. Therefore. A design idea and process should be examined sufficiently by idea sketch before using a computer for original editing. And. As editorial design is based on the aesthetic formative principles. there should be not only how to operate by the tool but also a basic editing design instruction sufficiently for the electronic page design.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.3
• /
• pp.266-270
• /
• 2013

Automatic tool changer(ATC) is typically provided to a machine tool to improve the efficiency of the machine tool significantly by saving time in moving, switching, installing and storing tools as well as adjusting a calibrating the machine tool. In this study, technical trend of machine tools automatic tool changer are analyzed by patent mapping. And future development direction of automatic tool changer has suggested. The analysis is carried out by using problem solution map for the applied patent during 2000 and 2010 in USA, Japan, Europe and Korea.

• Journal of Computational Design and Engineering
• /
• v.2 no.4
• /
• pp.197-205
• /
• 2015

Bladed disk (BLISK) is a vital part in jet engines with a complicated shape which is exclusively machined on a five-axis machine and requires high accuracy of machining. Poor quality of tool orientation (e.g., false tool positioning and unsmooth tool orientation transition) during the five-axis machining may cause collision and machine vibration, which will debase the machining quality and in the worst case sabotage the BLISK. This paper presents a reference plane based algorithm to generate a set of smoothly aligned tool orientations along a tool path. The proposed method guarantees that no collision would occur anywhere along the tool path, and the overall smoothness is globally optimized. A preliminary simulation verification of the proposed algorithm is conducted on a BLISK model and the tool orientation generated is found to be stable, smooth, and well-formed.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.4
• /
• pp.47-53
• /
• 2007

A bearing is one of core parts in automobile. Rubber seal of the bearing is important to improve performance of bearing, formed by hot-press die of rubber seal for the intricate shape. In this study, formed tools are used to machine die of bearing rubber seal and the machining operation is classified into the several process of high precision. Design of experiments is used to optimize selection of the formed tools for the efficient machining of the hot-press die. The cutting force, tool wear and tool life are determined to characteristics. And, the clearance angle, the rake angle and the length cutting edge are considered as the major factors. Experiments are repeated to use one-way factorial design, and tool life is predicted by regression model.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.26 no.3
• /
• pp.127-136
• /
• 2022

Recently, an unprecedented emerging infectious disease has rapidly spread, causing a global shortage of wards. Although various temporary beds have appeared, the supply of wards specializing in infectious diseases is required. Negative pressure isolation wards should maintain their function even after an earthquake. However, the current seismic design standards do not guarantee the negative pressure isolation wards' operational (OP) performance level. For this reason, some are not included in the design target even though they are non-structural elements that require seismic design. Also, the details of non-structural elements are usually determined during the construction phase. It is often necessary to complete the stability review and reinforcement design for non-structural elements within a short period. Against this background, enhanced performance objectives were set to guarantee the OP non-structural performance level, and a computerized tool was developed to quickly perform the seismic design of non-structural elements in the negative pressure isolation wards. This study created a spreadsheet-based computer tool that reflects the components, installation spacing, and design procedures of non-structural elements. Seismic performance review and design of the example non-structural elements were conducted using the computerized tool. The strength of some components was not sufficient, and it was reinforced. As a result, the time and effort required for strength evaluation, displacement evaluation, and reinforcement design were reduced through computerized tools.