• 한국공작기계학회논문집
• /
• 제10권4호
• /
• pp.91-96
• /
• 2001

In this paper, an investigation was performed on the dynamic interlaminar fracture toughness of CFRP(carbon filber rein-forcement plastics). Specimens used in this experiments are CF/PEEK laminated plates. In this experiments, Split Hopkin-sons Bar(SHPE) tes was apply to dynamic and notched flexure test. The model II fracture toughness of each unidirectional CFRP was estimated by the analyzed deflection of the specimen and J-integral with the measured impulsive load and reac-tions at the supported points. As an experimental results the vibration amplitude of [$0^{\circ}_10 /F_4 0^{\circ}_10 $] j-aminates appear more than that of [$0^{\circ}_10 /F_2 0^{\circ}_10 $ laminates for the j-integral and displacement velocity at a measuring point. Also, it is thought that the dynamic fracture toughness of two kind specimen(CF/PEEK) with the crease of displacement velocity becomes great at a measuring point with in the range of measurement.

• 한국정밀공학회지
• /
• 제15권4호
• /
• pp.125-133
• /
• 1998

The objective of this study is to propose a new approach for modelling of burr formation process during orthogonal cutting when the tool exits the workpiece. This approach is based on the rigid-plastic finite element method combined with the ductile fracture criterion and the element kill method. This approach is applied to orthogonal cutting process to predict the fracture location and the fracture angle as well as the cutting force. To validate this approach, orthogonal cutting tests inside SEM(scanning electron microscope) at very low speed are carried out using A16061-T6 to observe the behavior of the material during the chip and the burr formation. The results of the experiment are compared with those of the finite element simulation.

• Journal of Mechanical Science and Technology
• /
• 제14권2호
• /
• pp.207-214
• /
• 2000

Fracture phenomenon has been reported on blades, rotors, connections and rotor discs of LP turbines of nuclear power plants, which is caused by fatigue, stress corrosion and erosion. In this study, as a tool of reliability evaluation, a number of stress and fracture analyses were performed on the defected area under various operating conditions using the finite element method. Possible defects on key-way and rotor disc were assumed to be two-dimensional cracks and centrifugal force, temperature distribution and shrink-fit effect were included as external loads. From stress analysis results, stress intensity factors were obtained and these values can be utilized to evaluate reliability and predict remaining lifetime of the turbine discs.

• Journal of Chest Surgery
• /
• 제14권2호
• /
• pp.123-126
• /
• 1981

190 cases of the thoracic injuries experienced at the department of chest surgery, Chungnam National University Hospital, for 5 years from Jan. 1976 till Dec 1980, were analysed. The results are as follows; 1. The incidence rate of male to female was 5.1:1. The common age groups were 3rd, 4th and 5th decades, and the most common age group in the penetrating injury was 3rd decade. 2. The most common mode of the nonpenetrating injuries was a traffic accident [63.0%], and the most commonly used tool in the penetrating injuries is a knife [66.7%]. 3. The most common nonpenetrating injury was rib fracture [73.9%], and the common fracture sites were 5th, 6th, 7th and 8th ribs [especially, 7th rib]. The incidence rate of flail chest was 15% of the cases of the rib fractures. 4. The common associated injuries of the nonpenetrating were long bone fracture [18.3%], brain contusion [15.9%], and clavicle fracture etc.. 5. The common method of surgical treatment were closed thoracostomy [46.7%], thoracentesis, and open thoracotomy [7.4%] etc.. 6. The overall mortality was 2.8%. [Nonpenetrating; 0.8%, Penetrating; 6.3%]

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.269-273
• /
• 1997

In order to maker unmanned machining systems with satisfactory performances, it is necessary to incorporate appropriate condition monitoring systems in the machining workstations to provide the required intelligence of the expert. This paper deals with condition monitoring for chatter, tool wear and fracture during turning operation. To develop economic sensing and identification methods for turning processes, sound pressure measurement and digital signal processing technique were proposed. We suppressed chatter by stability control methodology, which was studied through manipulation of spindle speeds regarding to chatter frequencies. It was shown that tool wear and fracture were identified and to be estimated by using the wear indices. The validity of the proposed system was confirmed through the large number of cutting tests.

• 한국공작기계학회논문집
• /
• 제12권6호
• /
• pp.36-43
• /
• 2003

In machining of ceramic materials, they are very difficult-to cut materials because of there high strength and hardness. Machining of ceramics are characterized by cracking and brittle fracture. Generally, ceramics are machined using conventional method such as finding and polishing. However these processes are generally costly and have low MRR(material removal rate). This paper focuses on determining the optimal levels of process parameters for products with CNC machining center. For this purpose, the optimization of cutting parameters is performed based on experimental design method. A design and analysis of experiments is conducted to study the effects of these parameters on the surface roughness by using the S/N ratio, analysis of ANOVA and F-test. Cutting parameters, namely, cutting speed, feed and depth of cut are optimized with consideration of the surface roughness.

• 대한기계학회논문집A
• /
• 제30권6호
• /
• pp.722-727
• /
• 2006

Bone fracture healing is one of the important topics in biomechanics, demanding computation simulations due to the difficulty of obtaining experimental or clinical results. In this study, we adopt the design space optimization method which was established by the authors as a tool for the simulation of bone growth using its evolutionary characteristics. As the mechanical stimulus, strain energy density is used. We assume that bone tissues over a threshold strain energy density will be differentiated and bone tissues below another threshold will be resorbed. Under compression and torsion as loadings, the filling process of the defect is well illustrated following the given mechanical criterion. It is shown that the design space optimization is an excellent tool for simulating the evolutionary process of bone growth, which has not been possible otherwise.

• 자원환경지질
• /
• 제28권5호
• /
• pp.503-512
• /
• 1995

2차원 불연속 절리 모델 (Discrete Fracture Model)을 사용하여 절리망 내에서 지하수 흐름을 시뮬레이션하였다. 불연속 절리 모델에서는 지하수가 오직 절리망을 통해서 흐른다고 가정한다. 이와 같은 분석은 결정질암 같이 지질 매체의 투수율이 매우 낮은 경우에 유용하다. 하지만 불연속 절리망을 완벽하게 구현하는 것이 불가능하므로, 이에 접근하는 방법으로 확률 통계적 모델이 제안되었다. 확률-통계적 모텔은 특성인자(밀도, 방향, 길이, 틈새두께 등)가 특별한 분포 유형을 갖는다고 가정한다. 확률-통계적 모델은 가정된 분포를 따르도록 특성인자를 생성한다. 이 후 본 모델을 통해 분석된 몇몇 특성인자를 가지고 절리망을 생성한다. 절리망을 생성한 이 후 지하수의 유통을 계산하기 위해 유한요소법을 적용하였다. 이 때 일차원 선요소가 유한요소망의 주요 요소이다. 시뮬레이션 결과는 절리망 내의 주요 흐름 경로를 통해 보여진다. 절리망 내의 지하수 속도를 비교하여 주요 흐름 경로를 찾아낸다. 본 연구에서 개발된 모델은 절리망 내의 지하수 흐름에 특성인자들이 미치는 영향을 평가할 수 있는 방법을 제공한다. 이를 위하여 30번의 생성을 하는 몬테카를로 시뮬레이션을 통해서 여러 특성 인자들이 지하수 흐름에 미치는 영향을 평가하였다.

• 대한기계학회논문집A
• /
• 제30권4호
• /
• pp.393-401
• /
• 2006

The influences of stress triaxiality on ductile fracture have been investigated for various specimens and structures. With respect to a transferability issue, recently, the interests on local approaches reflecting micromechanical specifics are increased again due to rapid progress of computational environments. In this paper, the applicability of the local approaches has been examined through a series of finite element analyses incorporating modified GTN and Rousselier models as well as fracture toughness tests. The ductile crack growth of nuclear carbon steels is assessed to verify the transferability among compact tension (CT) specimens with different in-plane size. At first, the basic material constants were calibrated for standard CT specimens and used to predict fracture resistance (J-R) curves of larger CT specimens. Then, the in-plane size effects were examined by comparing the numerically estimated J-R curves with the experimentally determined ones. The assessment results showed that the in-plane size effect should be considered for realistic engineering application and the damage models might be used as useful tool for ductile fracture evaluation.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.365-371
• /
• 2004

Generally, fracture of a material is influenced by plastic zone size developed near the crack tip. Hence, according to the relative size of plastic zone in the material, the mechanics as a tool for analyzing the fracture process are classified into three kinds, that is, Linear Elastic Fracture Mechanics, Elastic Plastic Fracture Mechanics, Large Deformation Fracture Mechanics. Even though the plastic zone size is such an important parameter, the practical measurement techniques are very limited and the one for in-situ measurement is not virtually available. Therefore, elastic-plastic FEA has been performed to estimate the plastic zone size. In this study, it is noticed that side necking at the surface is a consequence of plastic deformation and lateral contraction and the relation between the plastic zone and side necking is investigated. FEA for modified boundary layer models with finite thickness, various mode mixities $0^{\circ}$, $30^{\circ}$, $60^{\circ}$, $90^{\circ}$ and strain hardening exponent n=3, 10 are performed. The results are presented and the implication regarding to application to experiment is discussed.