• 한국컴퓨터정보학회논문지
• /
• 제27권11호
• /
• pp.165-172
• /
• 2022

본 논문에서는 발달 장애 학생이 가상현실 콘텐츠로 직업 훈련을 수행하는 중에 콘텐츠가 부여한 과제를 이해하지 못하여 더 이상의 훈련을 진행하지 못하고 현재의 상태에 머물러 있는 상황이 발생했을 때 문제의 상태에서 스스로 벗어나서 훈련을 진행할 수 있도록 도움을 주는 행위, 즉 중재의 제공이 필요한 시점을 파악하는 방안을 연구하였다. 이를 위해, 선행 연구의 결과를 토대로 가상현실 기반의 바리스타 훈련을 수행할 수 있는 콘텐츠를 이용하여 커피 제조를 교육하는 과정에서 주어진 과제를 성공적으로 완수하기 위해 발달 장애 학생이 반드시 조작하여야 하는 바리스타 도구를 선정하고, 해당 도구와 발달 장애 학생의 왼손과 오른손과의 거리를 측정하여 통계적 분석을 통해 가설을 검증하였다. 손으로부터 관심 바리스타 도구 및 인접 도구들까지의 누적거리가 다른 바리스타 도구까지의 누적거리보다 상대적으로 긴 것으로 분석된 연구 대상자는 관심 바리스타 도구를 사용하고 있지 않을 확률이 크므로 해당 과제를 제대로 수행하고 있지 않다고 인식하고 중재를 제공할 시점이라고 판단할 수 있기 때문이다. 검증 결과, 왼손의 경우는 학생들의 훈련 수행의 성공 또는 실패 여부와 손과 바리스타 도구와의 거리간의 관계는 통계적으로 유의미하지 않은 것으로 분석되었으나, 오른손의 경우는 유의미하였다.

• 한국항행학회논문지
• /
• 제23권5호
• /
• pp.408-414
• /
• 2019

본 연구에서는 도심지역의 무인항공기 충돌 방지를 위한 관제 도구를 개발하였다. 개발된 도구에서 사용자는 실제 도심지역 3D 지도상에 기지국과 무인항공기를 배치한 뒤, 안전 거리를 가시화할 수 있다. 이 때, 무인항공기의 위치는 long-term evolution(LTE) 신호를 기반으로 계산된다고 가정하였다. 또한, 무인항공기의 안전 거리는 거리 측정 오차의 바이어스가 발생한 신호를 포함하도록 정의되었다. 이러한 안전거리 계산 방식은 다중 경로에 의해 바이어스 신호가 빈번히 발생하는 실제 도심환경의 특성을 반영한다. 개발된 도구 상에서 실측값을 바탕으로 파라미터를 설정하고 고장 신호 개수에 따른 안전거리의 변화를 시뮬레이션하였다. 그 결과 고장 신호의 개수가 증가함에 따라 안전거리가 증가하는 정상적인 결과가 출력됨을 확인하였다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1998년도 제27회 춘계학술대회
• /
• pp.292-299
• /
• 1998

Case hardening behavior of tool steel(SK5) was investigated after YAG laser irradiation. In the case of beam passes, martensite formed in the melt zone and in former pearlite regions of the austenization zone exhibited very high Vickers Hardness values. The molten depth and radius, micro structure, hardness were investigated as a function of defocusing distance, pulse width, and power density.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.34-41
• /
• 2004

The purpose of this paper is to look at the characteristics of surface finishing which is one of the form accuracies and to obtain the fundamental technical data from the process of machining with diamond tool through experiment and theoretical analysis. The experiments were conducted with domestic made ultra-precision machine and MCD.PCD tool, with aluminum alloyed material and brass being used for the work pieces. The goal of the size accuracy was set to 100nm. The most suitable tool nose radius and machining conditions were selected, and the variations of the surface roughness were observed using SEM method while machining the distance of up to 500km. These data were evaluated and they examined the variation of the machined surfaces while cutting up to 500km of machining distance. At the same time, the state for the wear of diamond tool nose was analyzed and carefully examined through the newest measuring device. Additionally, the characteristics of ultra-precision machining technology were studied through visual analysis.

• 한국생산제조학회지
• /
• 제19권5호
• /
• pp.596-602
• /
• 2010

In this study, a fmite element model was developed for analysis of feeding a structure in open loop control The finite element analysis (FEA) can simulate dynamic behavior of the structure of a machine tool rapidly traveling with a screw feeding driving system. The feeding mechanism was implemented with screw element of the FEA tool used in this study. The procedure was developed for the dynamic transient FEA. First, motion parameters such as jerk and velocity were introduced for the structure to be fed in open loop control When its traveling distance was determined, set-points for the distance were generated based on the motion parameters. The set-points were applied to the FE model constructed for the traveling structure. The FEA was executed and evaluated. In this study, the FEA procedure was applied to the column of a machine tool and the dynamic behavior of the column was evaluated. The FEA helps in evaluation of the motion characteristics of a structure. The convergence time of the structure vibration posterior to feeding termination can be estimated and the stiffness of the flexible structure is also evaluated against jerk, and acceleration. It provides the feeding force which is helpful in selection of the feeding motor.

• 한국기계가공학회지
• /
• 제18권7호
• /
• pp.8-13
• /
• 2019

As increasing demand for precise machining in advanced disciplines, especially in semi-conductor, aeronautical and automotive industries, the magnetic abrasive deburring(MAD) which is able to eliminate micro-sized burr on complex surface in less time has drawn the attention in the last decades. However, the performance of MAD is subject to shape and size of a tool. Therefore, this study aim to identify deburring behavior of MAD in U-type flow channel by measuring the length rate of burr removal in radial distance of the cylindrical tool under four process factors. In order to evaluate the deburring effect of MAD on the surface, finishing regions are divided based on center of the circular cutting tool. As a results, it was defined that the amount of burr removal in a downward direction moving toward flow channel from the top surface was higher than upward direction. This is because the magnetic abrasives were detached from magnetic lines of force due to geometrical shape.

• 한국공작기계학회논문집
• /
• 제14권2호
• /
• pp.48-54
• /
• 2005

The theodolite system consists of two theodolites, a scale bar and a target bu. A measurement accuracy of theodolite system is affected by a measurement distance of each equipment. This study was performed fir measuring an accuracy when the distance from theodolite to scale bar was changed 2~ 6 m on two theodolites distance 3 a The results showed thai the measurement accuracy could be $\pm$0.021 mm when the distance from theodolite to target was 2,3 and 6 n Specially, it was found that the maximum measurement accuracy was 10.017mm on theodolite collimation distance 3m and the distance 4 m of the theodolite and scale bar.

• 한국공작기계학회논문집
• /
• 제14권3호
• /
• pp.67-73
• /
• 2005

An accuracy of theodolite system may be affected by a measurement environment and a measurement distance change from theodolite to scale bar and/or targets. This study was performed for measuring an accuracy when the distance from thodolite system to scale bar was changed $2\~6m$ on the distance 4m between two theodolites. The results showed that an accuracy was ${\pm}0.025mm$ or better when the distance from theodolite system to targets was 3, 4 and 5m. According to the results, it was found that the best distance from theodolite system to scale bar was $3\~4m$ when the collimation distance was $3\~4m$.

• 한국공작기계학회논문집
• /
• 제14권4호
• /
• pp.13-21
• /
• 2005

The affected factors for an accuracy of theodolite system are not only the measurement environment of temperature, illumination, etc. but also the measurement processes of the distance between two theodolites, the distance from theodolite system to scale bar and the distance from theodolite system to targets. We have known that the best collimation distance between two theodolites and the best distance from theodolite system to scale bar is $3{\sim}4m$. This study was performed for searching the best distance from theodolite system to targets on above measurement configuration. And, we could know that the best distance from theodolite system to targets is $2{\sim}6m$ and the system accuracy could be within ${\pm}0.025mm$.

• 대한한의학회지
• /
• 제27권2호
• /
• pp.225-231
• /
• 2006

Objectives : This study was performed to determine if unknown species of antler samples could be identified by genetic distance methods. Methods : The DNAs of 4 antler samples were extracted, amplified by PCR, and sequenced. The DNAs of antlers were identified by genetic distance. Genetic distance method was made using MEGA software (Molecular Evolutionary Genetics Analysis, 3.1). Results : By genetic distance methods, all 4 antler samples were closest to Cervus elaphus nelsoni among Cervus species. Conclusion : These results suggest that genetic distance methods might be used as a tool for the identification of Cervus species.