• 한국실내디자인학회논문집
• /
• 제23권2호
• /
• pp.99-107
• /
• 2014

Façade design makes the customer to select and remember of commercial space. Therefore, if it can be identified characteristics of perception in image evaluation, it will be possible to easy visiting space and re-selection with motivation through identity and differentiation of commercial space. For this study, cafes among commercial facilities were selected for the appreciation of the differentiated design features attracting customer's eyes through space image evaluation by gender. The followings are the conclusions drawn from the study. First, when the features of mean and deviation of [Factor 1] were employed for the appreciation of the perceptual characteristics of both men and women, it was clearly found that customers regards the facade design as a coarse one even though they are confused about whether the facade design is the straightened-up one. Second, customers perceive facade design as the one which is bright but not unique through [Factor 2] while in the process of selecting adjectives to describe it men's perception as to "being vivid but interesting" was dispersed and women's as to "Being bright" was also dispersed, too but the women perceived it as "being opaque". Third, it was revealed that the perceptual characteristics of [Factor 3] were perceived as "warm but boorish" and "warm but crude" by men and women respectively. Fourth, most (80%) of the adjectives employed for vivid description of their perception by both genders were found to be consistent.

• 한국발생생물학회:학술대회논문집
• /
• 한국발생생물학회 2003년도 제3회 국제심포지움 및 학술대회
• /
• pp.24-25
• /
• 2003

The zebrafish (Danio rerio) is now the pre-eminent vertebrate model system for clarification of the roles of specific genes and signaling pathways in development. I will talk about positional cloning of two developmental mutants in zebrafish. The first mutant is headless: The vertebrate organizer can induce a complete body axis when transplanted to the ventral side of a host embryo by virtue of its distinct head and trunk inducing properties. Wingless/Wntantagonists secreted by the organizer have been identified as head inducers. Their ectopic expression can promote head formation, whereas ectopic activation of Wnt signalling during early gastrulation blocks head formation. These observations suggest that the ability of head inducers to inhibit Wntsignalling during formation of anterior structures is what distinguishes them from trunk inducers that permit the operation of posteriorizing Wnt signals. I describe the zebrafish headless (hdl) mutant and show that its severe head defects are due to a mutation in T-cell factor-3 (Tcf3), a member of the Tcf/Lef family. Loss of Tcf3 function in the hdl mutant reveals that hdl represses Wnt target genes. I provide genetic evidence that a component of the Wntsignalling pathway is essential in vertebrate head formation and patterning. Second mutant is mind bomb: Lateral inhibition, mediated by Notch signaling, leads to the selection of cells that are permitted to become neurons within domains defined by proneuralgene expression. Reduced lateral inhibition in zebrafish mib mutant embryos permits too many neural progenitors to differentiate as neurons. Positional cloning of mib revealed that it is a gene in the Notch pathway that encodes a RING ubiquitin ligase. Mib interacts with the intracellular domain of Delta to promote its ubiquitylation and internalization. Cell transplantation studies suggest that mib function is essential in the signaling cell for efficient activation of Notch in neighboring cells. (중략)

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제15권2호
• /
• pp.102-110
• /
• 2015

The main source of noise in computed tomography (CT) images is a quantum noise, which results from statistical fluctuations of X-ray quanta reaching the detector. This paper proposes a neural network (NN) based hybrid filter for removing quantum noise. The proposed filter consists of bilateral filters (BFs), a single or multiple neural edge enhancer(s) (NEE), and a neural filter (NF) to combine them. The BFs take into account the difference in value from the neighbors, to preserve edges while smoothing. The NEE is used to clearly enhance the desired edges from noisy images. The NF acts like a fusion operator, and attempts to construct an enhanced output image. Several measurements are used to evaluate the image quality, like the root mean square error (RMSE), the improvement in signal to noise ratio (ISNR), the standard deviation ratio (MSR), and the contrast to noise ratio (CNR). Also, the modulation transfer function (MTF) is used as a means of determining how well the edge structure is preserved. In terms of all those measurements and means, the proposed filter shows better performance than the guided filter, and the nonlocal means (NLM) filter. In addition, there is no severe restriction to select the number of inputs for the fusion operator differently from the neuro-fuzzy system. Therefore, without concerning too much about the filter selection for fusion, one could apply the proposed hybrid filter to various images with different modalities, once the corresponding noise characteristics are explored.

• Journal of Radiation Protection and Research
• /
• 제18권1호
• /
• pp.71-82
• /
• 1993

원자력 발전소 작업과의 피폭량은 발전소의 안전 운영에 관한 척도일 뿐 아니라, 일반 대중이 원자력 발전의 안전을 평가하는 기본 요소이다. 또한, 최근 ICRP 60에 의한 개인 피폭선량 한도의 하향조정 권고는 지속적인 피폭저감에의 노력을 요구하고 있다. 본 논문에서는 작업자의 피폭저감에 관한 대안선정시 사용할 수 있는 최적화 기법을 제시하고 실제로 원전 운영자예 의해 제안된 대안들을 검토하는데 이 기법을 적용하여 보았다. 분석과정에서 기본분석이외에 가변 경제변수를 고려한 민감도 분석을 통해 계산 결과의 불확실성을 보완하였다. 분석결과를 살펴보면, 먼저 비용-이득 분석에서는 '증기 발생기 Nozzle Dam 및 Torquing Machine'이 총 이득면에서 가장 우수한 것으로 평가되었고, 다속성 효용 분석의 경우 'Co-No Seal 조임장치'가 가장 높은 효용을 가진 것으로 나타나 약간의 차이를 보이고 있다. 따라서, 최적화 기법의 적용시에는 두 가지이상의 정량적 기법을 보완적으로 사용하고, 정성적 인자도 충분히 고려하는 것이 필요하다.

• 한국농공학회지
• /
• 제37권5호
• /
• pp.53-61
• /
• 1995

Analyses of subsurface drainage effects of farmland with respect to pipe and envelop material are made by the laboratory experiments using soil box to give basic information for the subsurface drainage system planning and design. Three different diameter PVC perforated pipes and a mesh pipe are used with envelop materials such as sand, rice bran, and crushed stone. Steady state subsurface drainage flow rate increased as envelop material changed from sand to rice bran and crushed stone. This indicates that as the hydraulic conductivity of the envelop material increases, the drainage flow rate increases. On the other hand, for a given envelop material, the mesh pipe which has the largest openning area shows the largest flow rate while small diameter PVC pipes show small flow rates. This tells that as the openning area and pipe diameter increase, the flow rate increases, too. Therefore, selection of pipe and envelop material should be made in accordance with the design drainage flow rate. Unsteady state subsurface drainage flow rate with respect to time differs for different envelop material. In case the sand was used as an envelop material, the small diameter PVC pipes show larger flow rates than the large diameter PVC pipe and mesh pipe. When the rice bran was used, the mesh pipe shows the largest flow rate, while small diameter pipes show smaller flow rates. In case the crushed stone was used as an envelop material, the large diameter PVC pipe and mesh pipe show larger flow rates, while small diameter pipes show a little bit smaller flow rates. However, the variation of flow rates among different pipes is the smallest when the crushed stone is used. The flow rate curve with respect to the pipe changes little for the crushed stone envelop which has a large hydraulic conductivity, while that changes much for the sand and rice bran envelops. However, it is difficult to draw a consistent relationship between the drainage flow rate and pipe for all the envelop materials. Since the subsurface drainage experiments are made only under the restricted laboratory condition in this study, further study including field experiment is required.

• 대한지역사회영양학회지
• /
• 제17권3호
• /
• pp.312-320
• /
• 2012

The purpose of this study was to investigate the perception of the school dietitian on superior agricultural products (SAP) and the status of using superior agricultural products in school meals. Questionnaires were distributed to 185 school dietitians after face to face interview, and a total of 181 responses were used for analysis. 82.3% of the respondents were using SAPs in school meals and there was a significant difference between elementary school (95.1%), middle school (76.8%) and high school (66.7%) dietitians (p < 0.001). 85.2% of the dietitians, who were using SAP, were purchasing SAPs through electronic bidding, and the main reason of not using SAPs was the higher price of SAPs than that of general agricultural products. The good agricultural practices (GAP) product was considered the most appropriate agricultural products for school meals by the majority of respondents (66.9%), and organic products was the next (13.3%). In addition, the most important selection criterion for a SAP perceived by school dietitians was safety (58.0%), and the main reason of using SAPs in school meals, when two choices were allowed, was 'to provide healthful food to children' (98.9%). The major barriers to using SAPs in school meals (two choices were allowed) were 'too expensive' (73.5%) and 'unstable supply' (32.6). In conclusion, it was suggested that there should be an improvement in SAP supply and management systems to increase the use of SAPs in school meals.

• Design & Manufacturing
• /
• 제11권1호
• /
• pp.45-49
• /
• 2017

Currently, a lot of efforts to make increases the manufacturing efficiency have tried and there is growing the interest to implementing the machining operation through CAM automation and optimization. This kind of movement has shown gradually in 5X milling as well as 3X milling task. By the way, in case of 5X milling, it is difficult to hire the CAM experts who is an experience for 5X machining and also it has too big trouble to use them due to high cost. For this reason, you can see the manufacturer who is concern the CAM S/W to provide the NC automation program that beginners can generate easily the 5X milling in short term and the existing 5X milling process can be improved. These requirements need to make a NC automation process including the practical machining strategies same as the generation by NC expert. In order to support this, it is necessary to directly apply the 3D machining part based on NC template which includes the machining procedures, standard cutter library, auto machine area selection, analyze tool for part shape, machining condition setting considering the material stiffness to be provided by CimatronE and it should be created the 5axis machining data by a minimized operation. With user-friendly, CimatronE's NC machining automation tools improve the 5-axis machining process and speed up the process, maximizing work efficiency and improving product productivity compared to existing machining tasks.

• 한국멀티미디어학회논문지
• /
• 제16권11호
• /
• pp.1288-1296
• /
• 2013

단일 영상에서 배경선은 공간 구조를 이해하거나 심미적 평가를(Aesthetic scoring) 내리는데 중요한 판단 기준이 된다. 본 논문에서 소개하는 배경선 추출은 소실점을 분석하거나 3차원 공간의 재구성, 영상의 기울어짐을 판단하는데 도움을 준다. 또한 삼등분 법칙(Rule of thirds)을 계산하는데도 용이하게 해준다. 본 논문은 크게 구간 허프 변환 매핑과 배경선 우선순위 결정, 배경선 선택으로 구성되어 있으며 각 기술은 차선 추출이나 건물 구조 분석, 소실점 추출, 문서의 직선 추출과 같은 다양한 분야에 응용될 수 있게끔, 기술이 세분화되어 있다. 이는 사용자가 객체의 특성과 조명 환경등을 고려하여 선택적으로 기술을 구성할 수 있게끔 해 준다. 본 논문에서 소개하는 방법은 허프 변환을 사용하는 만큼, 원 추출과 같은 허프 변환의 응용에도 적용될 수 있다. 구간 허프 변환은 추출하고자 하는 배경선의 개수를 설정할 수 있다. 또한 영상 내에서 중요한 배경선의 개수를 분석하여 중요한 배경선만을 추출할 수 있다. 본 논문은 실험결과를 통해 배경선 추출 결과를 볼 수 있다.

• 한국산학기술학회논문지
• /
• 제13권6호
• /
• pp.2751-2756
• /
• 2012

위성영상을 이용한 감독분류에서 훈련집단의 선택은 분류정확도에 많은 영향을 미친다. 일반적으로 훈련집단의 특징이 명확한 순수화소를 선택할 경우 전체 정확도가 높은 반면, 저해상도 영상이거나 식별이 불분명하여 혼합화소를 선택하면 정확도는 저하된다. 그러나 실제 영상분류를 수행할 때 순수화소만을 훈련집단으로 선택하는 것은 매우 어렵다. 이에 본 연구에서는 혼합화소를 훈련집단으로 선택하였을 경우 적합한 분류기법을 제시하고자 하였다. 이를 위해 소수의 순수화소를 훈련집단으로 선정하여 분류정확도를 산출하고 같은 수의 혼합화소를 이용한 분류결과와 정확도를 비교하였다. 연구 결과, 혼합화소를 사용한 분류기법들 중 SVM의 정확도가 가장 높았으며, 순수화소를 이용한 분류결과와도 가장 작은 차이를 보였다. 따라서 훈련집단으로 혼합화소를 선택할 가능성이 높은 건물 및 녹지혼합지역에서는 SVM을 이용한 영상분류가 가장 적합할 것으로 판단된다.

• 한국토양비료학회지
• /
• 제11권4호
• /
• pp.235-245
• /
• 1979

The land utilization of Korea composed about 22.7% of arable land, 66.9% of forest land and 10.4% for the rest like a house site, road, and lake etc. The ratio of arable land is too small as compared with forest land which is occuping two-thirds of Korea. The expansion of arable land by the reclamation will solve the food problems for increasing populations. First, we have to know the exact extents and distribution of reclaimable land but the reported total extent of reclaimable land in Korea is variable according to the authority which carried out the soil survey. The different reported data of reclaimable land is owing to the method and criteria of soil survey. 840,522ha in Land Capability Survey of the Farm Land Improvement Association and 321,203ha in the Forest Land Survey by the Office of Forest was reported but the Office of Rural Development said that total reclaimable land was 1,400,540ha including grazing and fruit land. To assume the extent of reclaimable land, the soil survey method and criteria of soil survey should be considered. It can be considered that the main reasons of less in extent of reclaimable land in the other authorities than the Office of Rural Development is due to the following. The grazing land and the fruits land are not included by the Farm Land Improvement Association and only relative forest is considered by the Office of Forest. The main purpose of soil survey carried out by the Office of Rural Development is to utilize land of Korea at most. The soil characteristics and potential productivity are considered in soil survey and the reported data was based on reconnaissance soil survey. The more accurate data will be find out by the end of 1979 when the detailed soil survey will be done. In selection of cropping system and management, the soil condition should be considered, because the soil characteristics of reslaimed land is less fertile than the arable lands.