• Proceedings of the Korean Society of Computer Information Conference
• /
• 2013.07a
• /
• pp.361-363
• /
• 2013

본 논문에서는 최근 스마트 헬스케어가 보건의료서비스에 특화시켜 환자와 의사가 직 간접적으로 진료를 할 수 있게끔 하는 스마트폰 환경에서의 원격진료 서비스가 부각됨에 따라 유무선 통신 인프라를 기반으로 노인, 만성질환자, 회복중인 환자나 수술 후 환자 그리고 일반인 등이 일상생활을 하면서 불편하거나, 거추장스럽지 않게 신체 정보를 측정하고 건강상태의 변화에 대한 전문가의 진단을 즉각적으로 제공하기 위해 Bluetooth HDP(Health Device Profile)을 통해 IEEE11073 PHD 표준 기반의 홈 헬스케어 의료기기 연결성을 보장하며, HL7 CDA 기반의 정보 전달 구조로 의료진뿐만 아니라 다양한 스마트 앱 어플리케이션 간의 융합을 가능하게 하는 스마트 헬스케어 솔루션을 설계하고자 한다.

• Ocean Systems Engineering
• /
• v.4 no.1
• /
• pp.1-19
• /
• 2014

Hydrodynamic coefficients strongly affect the dynamic performance of autonomous underwater vehicles (AUVs). A novel kind of underwater vehicle (Heavier-than-water AUV) with higher density than water is presented, which is different from conventional ones. RANS method and overlapping grids are used to simulate the flow field around the vehicle. Lifts, drags and moments of different attack and drift angles in steady state are calculated. The hydrodynamic performances and how the forces change with the attitude are analyzed according to the flow field structure. The steady-state results using overlapping grid method are compared with those of software FLUENT and wind tunnel tests. The calculation results show that the overlapping grid method can well simulate the viscous flow field around the underwater vehicle. Overlapping grid skills have also been used to figure out the planar-motion-mechanism (PMM) problem of Heavier-than-water AUV and forecast its hydrodynamic performance, verifying its effectiveness in dealing with the dynamic problems, which would be quite helpful for design and control of Heavier-than-water AUV and other underwater vehicles.

• Ocean Systems Engineering
• /
• v.3 no.2
• /
• pp.97-122
• /
• 2013

For the optimization design and strength evaluation of the umbilical cable, the calculation of cross section stress is of great importance and very time consuming. To calculate the cross section stress under combined tension and bending loads, a new integrated analytical model of umbilical cable is presented in this paper. Based on the Hook's law, the axial strain of helical components serves as the tensile stress. Considering the effects of friction between helical components, the bending stress is divided into elastic bending stress and friction stress. For the former, the elastic bending stress, the curvature of helical components is deduced; and for the latter, the shear stress before and after the slipping of helical components is determined. This new analytical model is validated by the experimental results of an umbilical cable. Further, this model is applied to estimate the extreme strength and fatigue life of the umbilical cable used in South China Sea.

• Journal of Magnetics
• /
• v.19 no.3
• /
• pp.300-308
• /
• 2014

This paper develops a moving-magnet electromagnetic actuator for fast steering mirror (FSM). The actuator achieves a reasonable compromise between voice coil actuator and piezoelectric actuator. The stroke of the actuator is between the strokes of a piezoelectric actuator and a voice coil actuator, and its force output is a linear function of air gap and excitation current within our FSM travel range. Additionally, the actuator is more reliable than voice coil actuator as the electrical connection in the actuator is static. Analytically modeling the actuator is difficult and time-consuming. Alternatively, numerous finite element simulations are carried out for the actuator analysis and design. According to the design results, a real prototype of the actuator is fabricated. An experimental test system is then built. Using the test system, the force output of the fabricated actuator is evaluated. The test results validate the actuator analysis and design.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.827-829
• /
• 2013

생체인식을 통한 개인 인증방법에는 지문인식과, 홍채인식 등이 활발하게 연구가 진행되고 있다. 본 논문에서는 생체인식을 통한 개인 인증 방법 중 우측 검지손가락 정맥을 이용한 방법을 사용하였다. 적외선 LED 8개를 이용하여 적외선을 손가락에 투과하여 CMOS카메라를 통하여 영상을 획득하는 정맥인식장치를 개발하고 영상을 채집한다. ROI영역을 추출하여 손가락 정맥인식을 위한 영상부분만 추출한다. 추출된 영상을 통하여 미디언 필터를 이용하여 noise를 제거하고 히스토그램 평활화를 통한 정맥영역을 부각시킨다. 특히 지역적 히스토그램 평활화를 통해서 보다 정확한 정맥의 영역을 찾는다. 지역적 히스토그램 평활화를 통한 영상을 이진화를 시키고 세선화를 통해서 이후 패터매칭을 통한 개인 인증방법에 대한 전처리 영상을 구한다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.11
• /
• pp.5282-5300
• /
• 2017

Multi-hop cellular networks (MCNs) reduce the transmit power and improve the system performance. Recently, several research studies have been conducted on MCNs. The mobile relay selection scheme is a rising issue in the design of MCNs that achieves these advantages. The conventional opportunistic relaying (OR) is performed on the single factor for maximum signal-to-interference-plus-noise ratio (SINR). In this paper, a comprehensive OR scheme based on Bi-Target is proposed to improve the system throughput and reduce the relay handover by constraining the amount of required bandwidth and SINR. Moreover, the proposed algorithm captures the variability and the mobility that makes it more suitable for dynamic real scenarios. Numerical and simulation results show the superiority of the proposed algorithm in both enhancing the overall performance and reducing the handover.

• Journal of Magnetics
• /
• v.19 no.2
• /
• pp.130-139
• /
• 2014

This paper focuses on the modeling and analysis a novel two-axis rotary normal-stress electromagnetic actuator with compact structure for fast steering mirror (FSM). The actuator has high force density similar to a solenoid, but its torque output is nearly a linear function of both its driving current and rotation angle, showing that the actuator is ideal for FSM. In addition, the actuator is designed with a new cross topology armature and no additional axial force is generated when the actuator works. With flux leakage being involved in the actuator modeling properly, an accurate analytical model of the actuator, which shows the actuator's linear characteristics, is obtained via the commonly used equivalent magnetic circuit method. Finally, numerical simulation is presented to validate the analytical actuator model. It is shown that the analytical results are in a good agreement with the simulation results.

• The Journal of Korean Medical History
• /
• v.21 no.2
• /
• pp.115-122
• /
• 2008

Ma Gwa Hwe Tong, or 麻疹會通 is a general medicinal classic on measles which was an attempt to cope with the situation in the later Joseon Dynasty, when measles was prevailing all throughout the country. It was written in 1798 by Jung Yak Yong, who was a famous realist and a distinguished scholar, and in one of the chapters called Oh Gyun Pyun shows his thoughts. What he is trying to do through his writings, Ma Gwa Hwe Tong, was not reforming the current medicinal studies but to organize the classics on measles that he had access to with a system in order. The progressive thoughts shown in his other book, Eui-Ryung or 醫零, should be considered as his own thoughts only, and it is an overstatement to consider the book of Ma Gwa Hwe Tong to be his tryout in such thoughts.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2004.11a
• /
• pp.413-416
• /
• 2004

오늘날의 컴퓨팅 시스템은 비즈니스 거래와 분산 업무 처리로 확대되어가고 있으며 정보 기술은 점차적으로 재사용성과 독립성 그리고 이식성을 가진 컴포넌트를 기반으로 한 응용 개발이 확산되고 있다. 컴포넌트 개발 형태는 코드의 재사용이나 클래스 라이브러리보다 좀 더 발전된 형태의 부품개발 형태로서, CBD(Component Based Development)를 기초로 한다. 그러나 CBD를 이용하여 새로운 컴포넌트를 구축하는 비용의 증가와 함께 비즈니스 요구사항에 맞는 컴포넌트 개발을 위한 노력이 필요하며, 빠르고 정확한 컴포넌트 정보를 지원할 수 있도록 시스템 측면에서 정규화 형태의 컴포넌트 모델이 요구되고 있다. 본 논문에서는 사용자 요구사항에 접근하고, 재사용성과 독립성, 그리고 이식성을 가진 컴포넌트를 추출하고, 컴포넌트를 대상으로 인터페이스 나타내고자 한다. 따라서 본 논문에서는 학부생들을 위한 학생정보시스템 구축을 위한 시스템 분석 및 설계 모델을 RUP(Rational Unified Processing) 방법론을 이용한다.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1998.10a
• /
• pp.210-232
• /
• 1998

Tong-il, the high-yielding rice variety bred on early 1970, effected a turning point in modern rice production in Korea. As rice production reached the highest record yield in 1978 with HYV, Korea achieved self-sufficiency in domestic supply of rice (or the first time in (her own) history, HYV required high input of fertilizers and pesticides for proving its yielding ability and needed new techniques such as early nursery-planting to prevent chilling damage. But, farm economy did not follow the successful achievement of rice production because of increased farming cost and inflation.'Tong-il variety has been replaced by new high-yielding Japonica varieties from 1980 when record-low-temperature during summer months had persisted. Also, the cooked rice of Tong-il variety did not agree with the appetite of Korean people. Though the hectarage of Tong-il rice did reduce, farmers applied the same high-input cultural techniques for new Japonica cultivars as did for Tong-il variety. Heavy application of nitrogen fertilizer contaminated surface and ground water with nitrate ions while phosphorous fertilizer was blamed for algae pollution. Frequent spray of pesticide and herbicide reduced significantly the biotic population in paddy ecosystems including insects and soil microorganisms. The new technologies of the 21st century must be directed to produce safe food, to save natural resources, and to preserve a clean environment for human welfare. We need low-input sustainable farming techniques to provide high-yielding crops and to preserve a healthy ecosystem.