• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.5
• /
• pp.159-169
• /
• 2008

The aim of this paper is to research the changes of social welfare by internalizing external cost, especially the maintenance cost. Main target of this paper is the Cheonan$\sim$Nonsan Line, where private capital highway, national highway and local road are competing against each other. Considering the realistic difficulties in applying the First Best pricing, this paper applied the Second Best pricing, applying the maintenance cost, in lieu of the already mentioned. The demand functions of the toll roads were built through regression analysis. By reflecting the maintenance cost to the toll fee, It was able to confirm the variation of social welfare deriving from the traffic assign change but also the aspects of toll revenue at the same time. Result of applying the Second Best pricing shows merely a small change in social welfare. However, in the aspect of finance, it is analyzed that there will be about 13 billion won worth of financial effectiveness which will contribute to the reduction of the national financial support.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.2
• /
• pp.33-43
• /
• 2022

The number of car crashes increases along with the increasing number of vehicles. Hence, diverse initiatives on traffic accidents have been implemented, targeting zero crash fatalities. According to the 3rd Traffic Safety Master Plan of 2016, the current standard selecting road accident black spots prioritizes locations with the high cumulative death toll. While this standard is suitable for roads that a city government manages to some extent, it is not suitable for roads less than 20 meters that a borough (Gu) handles. The roads under the supervision of a borough do not have enough death toll, and thus improvements on its road accident black spots are highly limited. In addition, discovering the causes of traffic accidents is not easy when the number of car accidents is obtained by considering only fatal accidents, which are relatively low in number. Therefore, including all traffic accidents might identify causes of accidents and result in better advancements. Therefore, this research follows rational decision-making and suggests new National Traffic Safety Master Plan standards. These new standards are obtained by comparing accident costs between the location of fatal crashes and road accident black spots. The analysis result shows that considering all types of accidents yields better results. For example, a Three-way Intersection in front of Zion Day Care Center, one of the selected spots under the current standard, has lower road crash costs than Sinchon Intersection, a selected spot under a new standard. Therefore, the study concludes that the standards to select road accident black spots need to include traffic accident severity and road crash costs.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.4
• /
• pp.30-37
• /
• 2014

The Electronic Toll Collection System based on Free-Flow Multi-Lane is needed to solve some yearly problems such as traffic congestion, safety accident, maintenance by hold-up of one way hi-pass system. The hi-pass communication system is first-in, first-out method in one way environment so, it can't handle various running patterns such as vehicle platoon, switching lane and passing in multi-lane environment. In this thesis we compared and analyzed the communication system of foreign countries ETCS operating system and domestic hi-pass communication system, then studied communication system which can run in multiple-way accepting existing hi-pass OBU. And we formed the communication system of Free-Flow Multi-Lane environment as a plan using incoherent of IR antenna and coherent of RF antenna. The communication system in Free-Flow Multi-Lane environment can be used not alone in parking garages but in expressways of ETCS and toll roads from now on.

• International Journal of Highway Engineering
• /
• v.9 no.4
• /
• pp.185-192
• /
• 2007

Newly constructed road is a requisite to be able to carry out BMPs (Best Management Practices) under TMDL(Total Maximum Daily Load) program of the Ministry of Environment. BMPs require pollutant source control during road construction and wash off reduction plan as well as maintenance practices subsequent to construction on the purpose of discharging the minimum wash off non-point source pollutants. The objective of this study is to provide supportive discharged data in evaluating the discharged non-point pollutant load from a highway toll gate area. It can be applied to manage non-point source pollutants on roads. The results validate the first flush phenomenon that it is known to be one of the wash off characteristics in paved area. In addition, the load per unit area and load per unit rainfall duration applying EMC are calculated. The mean load per unit rainfall duration is assessed to be $533.7mg/m^2-hr$ for TSS, $396.2mg/m^2-hr$ for COD, $17.0mg/m^2-hr$ for TN, and $4.8mg/m^2-hr$ for TP. These results show the unitload taken from monitoring are higher than the unit load suggested in the TMDL. It is important to adopt real pollutant unit for road to be able to perform BMP successfully.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.1
• /
• pp.58-70
• /
• 2020

Detour behavior on the expressway means that the driver uses the local road by passing the part of the expressway which is stagnant at the time of the traffic demand such as holidays. Since the detour rate was estimated through the survey at toll gate in the past, there was a difficulty in estimating the actual detour rate due to the small sample of the survey. In this study, we use DSRC-based route travel data to conduct empirical studies on detour patterns such as the estimation of actual detour rate, the improvement of travel time using detour road, and the correlation between traffic conditions on the expressway and detour rate. On the day of Chuseok and the day before Chuseok, the analysis of Giheung-DongtanIC→OsanIC and Seopyeongtaek IC→Walgott JC showed that the use of detour roads increased gradually during the congestion of the main line and travel time reduced when using detour roads, However, when the traffic congestion of the main line is not severe, the travel time increases when using the detour roads. The correlation between the traffic condition of the expressway and the actual detour rate has a negative correlation, which is consistent with the congestion pattern of the main line. The results of this study can be used to overcome limitations of detour pattern research based on surveys in the past and to establish a detour strategy for expressway sections where traffic demand is concentrated.

• Journal of Digital Convergence
• /
• v.16 no.4
• /
• pp.87-94
• /
• 2018

Intelligent transportation systems are one of the most important new forms of infrastructure on domestic roads, and is a system that makes possible the most efficient movement of vehicles on a road. The High Pass system, which is a domestic intelligent transportation system, started a little later than in other countries but developed at a rapid pace. With the recent introduction of smart tolling technology, it provided an opportunity to stop and review the tolling system. This study aims to investigate the driving method and results of LDCC for domestic smart towing through case study. Unlike other companies, Lotte Data Communication Company has long invested in payment systems. It has little experience investing in infrastructure, but participated in the Smart Toll System at the Gwangan Bridge in cooperation with the Busan City government, to lead the development of intelligent transportation systems. LDCC, which has made new investments, not only exceeded its existing core competencies, but also upgraded Korea's tolling system's ability to reduce greenhouse gas emissions and improved its financial performance.

• International Journal of Highway Engineering
• /
• v.14 no.6
• /
• pp.85-92
• /
• 2012

PURPOSES : Since expressways in South Korea are toll roads, many trumpet type interchanges exist, resulting in the installation of loop ramps very frequently. While the travel speed of the main lane is designed to be 100-110 km/h, the structure of a loop ramp is different and is designed for a minimum speed of 40 km/h. In fact, most of the actual travel speeds measured on the ramp exceed the designated speed, which has been a major problem in traffic safety. In this research, a type of pavement marking speed-reduction treatment called the "Peripheral Transverse Line" is installed on expressway loop ramps in order to study the change of driving speeds after the installation. METHODS : To verify statistically the change, this speed-reduction treatment has been installed on the Chungju interchange and the Yeoju junction. The driving speeds before the installation were compared with driving speeds both one month and five monthsafter the installation. RESULTS : As a result, the reductions of the average driving speeds after the treatment were statistically significant. More specifically, the average driving speeds of the Chungju interchange were reduced by 7.1-7.7 % for its tangent road section, and the speeds decreased by 8.5-9.5 % for its curve section. Similarly, in the Yeoju junction, an average speed reduction of 2.9-4.8 % for its tangent section was measured, along with 3.9% long-term speed reduction for its curve section. CONCLUSIONS : Since the pavement marking speed-reduction treatment has been partially proven to be effective from this research, we expect to expand this treatment and re-confirm the effect from a long-term perspective in the future.

• Journal of Korean Society on Water Environment
• /
• v.24 no.5
• /
• pp.543-549
• /
• 2008

Human activities and land-use practices are intensely widening the urban areas. High impervious surface areas cover much of urban landscapes and are the primary pollutant sources which can lead to water quality and habitat degradation in its watershed. As the urban areas expand, transportation land-use such as parking lots, roads, service areas, toll-gates in highways and bridges also increase. These land-uses are significant in urban pollution due to high imperviousness rate and vehicular activities. To regulate the environmental impacts and to improve the water quality of rivers and lakes, the Ministry of Environment (MOE) in Korea developed the Total Pollution Load Management System (TPLMS) program. The main objective is to lead the watershed for a low impact development. On a local scale, some urban land surfaces can be emitting more pollution than others. Consequently, in urban areas, the unit loads are commonly employed to estimate total pollutant loadings emitted from various land-uses including residential, commercial, industrial, transportation, open lands such as parks and golf courses, and other developed land like parking areas as a result of development. In this research, unit pollutant loads derived specifically from transportation land-uses (i.e. branched out from urban areas) will be provided. Monitoring was conducted over 56 storm events at nine monitoring locations during three years. Results for the unit pollutant loads of transportation land-use are determined to be $399.5kg/km^2-day$ for TSS, $12.3kg/km^2-day$ for TN and $2.46kg/km^2-day$ for TP. The values are higher than those of urban areas in Korean MOE and US highways. These results can be used by MOE to separate the pollutant unit load of transportation landuses from urban areas.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.3 no.2 s.5
• /
• pp.41-53
• /
• 2004

This study introduces the process of the field test of ETCS that has been performed by six enterprises for selecting the type of ETCS that will be applied to the internal tall roads. The main communication modes of six enterprises are active RF(radio wave)type and IR(optical wave)type. In this study, communication modes and systems, which are being used by each enterprises, have been compared and analyzed. Besides this, the configuration and the basic performances of the system have been checked. After those, the contents of the field performance test classified by the items of the test and the results of the test, finally, have been analyzed. Through analyzing the test, it is found that an enterprise using IR type and two enterprises using RF type satisfied the standards of the test and the others failed to meet the standards. However, the enterprises seem to be becoming stable by a large number of tests and the effort for improving from general point of view. Although the methods of performance evaluation in this field test considered enough patterns that are used in the present highway or Hi-Pass, there might possibly be some problems in the results because Korea Highway Corporation had decided the method and the number of times of the test according to their own standards about the various situations that can happen. Therefore, it will be needed to develop the method of standards for testing the performance which can be correspond with driver's behavior that can actually happen on the highway or the methods of transportation management.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.133-144
• /
• 2009

Incheon Bridge, 18.4 km long sea-crossing bridge, will be opened to the traffic in October 2009 and this will be the new landmark of the gearing up north-east Asia as well as the largest & longest bridge of Korea. Incheon Bridge is the integrated set of several special featured bridges including a magnificent cable-stayed girder bridge which has a main span of 800 m width to cross the navigation channel in and out of the Port of Incheon. Incheon Bridge is making an epoch of long-span bridge designs thanks to the fully application of the AASHTO LRFD (load & resistance factor design) to both the superstructures and the substructures. A state-of-the-art of the geotechnologies which were applied to the Incheon Bridge construction project is introduced. The most Large-diameter drilled shafts were penetrated into the bedrock to support the colossal superstructures. The bearing capacity and deformational characteristics of the foundations were verified through the world's largest static pile load test. 8 full-scale pilot piles were tested in both offshore site and onshore area prior to the commencement of constructions. Compressible load beyond 30,000 tonf pressed a single 3 m diameter foundation pile by means of bi-directional loading method including the Osterberg cell techniques. Detailed site investigation to characterize the subsurface properties had been carried out. Geotextile tubes, tied sheet pile walls, and trestles were utilized to overcome the very large tidal difference between ebb and flow at the foreshore site. 44 circular-cell type dolphins surround the piers near the navigation channel to protect the bridge against the collision with aberrant vessels. Each dolphin structure consists of the flat sheet piled wall and infilled aggregates to absorb the collision impact. Geo-centrifugal tests were performed to evaluate the behavior of the dolphin in the seabed and to verify the numerical model for the design. Rip-rap embankments on the seabed are expected to prevent the scouring of the foundation. Prefabricated vertical drains, sand compaction piles, deep cement mixings, horizontal natural-fiber drains, and other subsidiary methods were used to improve the soft ground for the site of abutments, toll plazas, and access roads. Light-weight backfill using EPS blocks helps to reduce the earth pressure behind the abutment on the soft ground. Some kinds of reinforced earth like as MSE using geosynthetics were utilized for the ring wall of the abutment. Soil steel bridges made of corrugated steel plates and engineered backfills were constructed for the open-cut tunnel and the culvert. Diverse experiences of advanced designs and constructions from the Incheon Bridge project have been propagated by relevant engineers and it is strongly expected that significant achievements in geotechnical engineering through this project will contribute to the national development of the longspan bridge technologies remarkably.