• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.1
• /
• pp.85-94
• /
• 2014

Tolerance accumulation has serious effect on the performance of an assembled body. This paper proposes the method which analyzes tolerance accumulation using Monte Carlo Simulation. This method can predict tolerance distribution of fully assembled body using the dimensional tolerance distribution of each part to be assembled. In this analysis, it is assumed that the tolerance of each part has the nominal distribution or uniform distribution. This analysis method is applied to ECV(External Control Valve), and the accumulated tolerance of the fully assembled ECV is obtained from the analysis. The results show that initial tolerance given to each part do not meet the design requirement of ECV. Hence, the tolerances of each part are modified and the additional analysis with the modified tolerances yields the results which satisfy the design requirements of ECV.

• Microbiology and Biotechnology Letters
• /
• v.23 no.3
• /
• pp.352-358
• /
• 1995

In this study, authors investigated the cadmium tolerance, the accumulation of cadmium, and the cellular distribution of accumlated cadmium in lactic acid bacteria under the anaerobic condition. Lactic acid bacteria grew fairly well in modified EG medium containing 10 ppm of cadmium but could hardly grow at 50 ppm of cadmium. Tolerance to cadmium of genus Lactobacillus was greater than that of genus Streptococcus, and Lactobacillus acidophilus showed the higest cadmium tolerance amomg the bacteria tested. The capacity of cadmium accumlation (9.304-12.428 mg/g wet cell) of lactic acid bacteria was higher than that (6.775 mg/g wet cell) of Escherichia coli. Lactobacillus casei of them took up the largest amount of cadmium. The cadmium elimination amount (28.46-29.25%) of lactic acid bacteria from modified EG medium containing cadmium were also higher than that (14.43%) of Escherichia coli. Accumulated cadmium in Lactobacillus acidophilus was distributed by 42.41% at cell wall, 28.97% at cytoplasm, and 28.62% at plasma membrane, respectively.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.1
• /
• pp.6-13
• /
• 2000

Water deficit is the primary constraint of soybean [Glycine max (L.) Merr.] yield, and a physiological understanding of processes affected by water deficit is a key step in identifying and improving drought tolerance in soybean. The objectives of this research were to evaluate biomass and nitrogen accumulation patterns and water use efficiency (WUE) as possible mechanisms associated with the drought tolerance of Jackson. Biomass accumulation of Jackson was contrasted with the PI416937, which also has demonstrated tolerance to drought. For water-deficit treatment, total biomass accumulation was negligible for PI416937, but biomass accumulation continued at approximately 64 % of the well-watered treatment of Jackson. Transpirational losses for Jackson and PI416937 were approximately the same for the water-deficit treatment, indicating that Jackson had superior WUE. Isotopic discrimination of $^{13}$ C relative to $^{12}$ C also indicated that Jackson had higher WUE. Results indicated that increased WUE for Jackson under water deficit showed it was tolerant to drought rather than had an avoidance mechanism.

• Journal of Welding and Joining
• /
• v.30 no.1
• /
• pp.78-84
• /
• 2012

Due to the inherent dimensional uncertainty, tolerances accumulate in the final assembly. Tolerance accumulation has serious effect on the performance of ECV assembly. This paper proposes a method of tolerance accumulation analysis using Monte Carlo simulation, which includes welding process in assemble process. This method can predict the final tolerance distributions of the completed assembly with the prescribed statistical tolerance distribution of each part to be assembled. With the inclusion of welding, another dimensional uncertainties due to partial melting is to be accounted as well. Partial melting of projection height was included in the tolerance propagation analysis. Verification of the proposed method was performed by making use of Monte Carlo simulation. Monte Carlo simulation results showed promising results in that we can predict the final tolerance distributions in advance before actual assembly process of precision machinery.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.1
• /
• pp.119-124
• /
• 2015

According as radiation therapy technique develops, standardization of radiation therapy has been complicated by the plan QA(Quality Assurance). However, plan QA tools are two type, OADT (opposite accumulation dose tool) and 3DADT (3 dimensional accumulation dose tool). OADT is not applied to evaluation of beam path. Therefore tolerance error of beam path will establish measurement value at OADT. Plan is six beam path, five irradiation field at each beam path. And beam path error is 0 degree, 0.2 degree, 0.4 degree, 0.6 degree, 0.6 degree, 0.8 degree. Plan QA accomplishes at OADT, 3DADT. The more path error increases, the more plan QA error increases. Tolerance error of OADT path is 0.357 using tolerance error of conventional plan QA. Henceforth plan QA using OADT will include beam path error. In addition, It will increase reliability through precise and various plan technique.

• Journal of Environmental Science International
• /
• v.11 no.11
• /
• pp.1173-1181
• /
• 2002

The present study was undertaken to investigate the effect of low temperature and salicylic acid(SA) on the chilling tolerance of acclimated and nonacclimated cucumber(Cucurmis sativus L.) seedlings. The acclimation phenomenon was characterized in chilling-sensitive cucumber seedlings and found to have a significant effect on the survival and shoot dry weights. The injuries experienced by the acclimated seedlings in the third leaf stage were on average smaller by half than those experienced by the nonacclimated seedlings. Chilling also caused a large increase in the free proline levels, regardless of the acclimation status. Exogenous treatment with SA(0.5mM) resulted in improved growth and survival of the nonacclimated chilled seedlings, indicating that SA induced chilling tolerance and SA and acclimation had common effects. The application of cycloheximide in the presence of SA restored the acclimation-induced chilling tolerance. The elevated proline level observed in the cold-treated and SA-treated plants was more pronounced in the light than in the dark at a chilled temperature, indicating that endogenous proline may play a role in chilling tolerance by stabilizing the water status in response to chilling. From these results it is suggested that SA provided protection against low-temperature stress by increasing the proline accumulation, and pre-treatment with SA may induce antioxidant enzymes leading to increased chilling tolerance.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.46 no.5
• /
• pp.387-394
• /
• 2001

Blackgram (Vigna mungo) is more salt tolerant than mungbean (Vigna radiata). This study was initiated to know whether the accumulation pattern of mineral ions in different plant parts plays a significant role in the differences in salt tolerance between the two Vigna species. Different mineral ions, viz. N, Cl, Na, K, Mg and Ca in different organs of two varieties of each of blackgram- Barimash-l (susceptible one) and Barimash-2 (tolerant one), and mungbean-Barimung-3 (tolerant one) and Barimung-4(susceptible one), were analyzed after growing with 0, 50, 75 and 100 mM NaCl solutions. The two crops showed a decreased but similar pattern of total N accumulation under saline conditions. The tolerant variety of both the crops showed a less reduction in total N than the susceptible one. Leaves showed the maximum while stem the minimum N, irrespective of levels of salinity. C $l^{[-10]}$ and N $a^{+}$ accumulation increased with the increasing salinity levels. Interestingly, similar to a halophyte, the salt tolerant blackgram exhibited conspicuously higher amount of N $a^{+}$ in the shoot than the salt-susceptible mungbean. However, the tolerant varieties showed less amount of N $a^{+}$ than the susceptible one, especially in blackgram. Seeds of both Vigna spp. accumulated the minimum amount of N $a^{+}$ than other plant parts. $K^{+}$ accumulation decreased by salinity in most of the plant parts, except seeds. Blackgram showed larger reduction in K than mungbean. The $Mg^{++}$ increased in leaves, petioles and stem by salinity while decreased in the roots, podshells and seeds in both the crops. Salinity increased $Ca^{++}$ accumulation in all plant-parts except roots of both Vigna spp. Apparently, the leaves of mungbean accumulated higher concentration of $Ca^{++}$ than blackgram. Varietal differences in the accumulation pattern of $K^{+}$, $Mg^{++}$ and $Ca^{++}$ were not clear. It was concluded that blackgram, presumably, possesses a similar salt tolerance mechanism to halophyte, and the pattern of accumulation of mineral ions in blackgram and mungbean was not fully ascribed to the differences in salinity tolerance between the two Vigna species.gna species.ies.s.ies.

• Journal of Plant Biotechnology
• /
• v.47 no.4
• /
• pp.324-329
• /
• 2020

Reed (Phragmites spp.) is a rhizomatous plant of the Poaceae family and is known as high tolerant plant to heavy metal contaminants. This plant is widely recognized as a Cd root-accumulator, but improved heavy metal tolerance and uptake capacity are still required for phytoremediation efficiency. To enhance capacity of hyperaccumulator plants, ethyl methane sulfonate (EMS) as chemical mutagen has been introduced and applied to remediation approaches. This study aimed to select EMS-mutagenized reeds representing high Cd resistance and large biomass and to investigate their ability of Cd accumulation. After 6 months cultivation of M₂ mutant reeds under Cd stress conditions (up to 1,500 µM), we discovered seven mutant individuals that showed good performances like survivorship, vitality, and high accumulation of Cd, particularly in their roots. Compared to wild type (WT) reeds as control, on average, dry weight of mutant type (MT) reeds was larger by 2 and 1.5 times in roots and shoots, respectively. In addition, these mutant plants accumulated 6 times more Cd, mostly in the roots. In particular, MT8 reeds showed the greatest ability to accumulate Cd. These results suggest that EMS mutagenesis could generate hyperaccumulator plants with enhanced Cd tolerance and biomass, thereby contributing to improvement of phytoremediation efficiency in Cd-contaminated soil or wastewater. Further studies should focus on identifying Cd tolerance mechanisms of such EMS-mutagenized plants, developing techniques for its biomass production, and investigating the practical potential of the EMS mutants for phytoremediation.

• Journal of Plant Biology
• /
• v.20 no.1
• /
• pp.23-27
• /
• 1977

In order to investigate the possibility of sugar beet culture in reclaimed area of our country and the salt tolerance of sugar beet, a variety Kawemegapoly was used for experimentation in plots of various salt concentration arranged in Kimpo reclaimed area located at Kyongkido Province. The salt concentration of cultivating layer of the field in the west coast of Korea began to decline from the middle of June and rises again in the middle of October growing season of sugar beet as generally seen in relaimed paddy fields of Korea. The soil of less than 0.5% salt concentration is most suitable for the culture of sugar beet has bery strong salt tolerance. The sugar accumulation of sugar beet in each plot declined once in the middle part or in latter September and began to proceed again from the early of October. Such temporary retrocession of sugar accumulation was observed.

• Korean Journal of Plant Tissue Culture
• /
• v.27 no.4
• /
• pp.339-343
• /
• 2000

When plants are exposed to subfreezing temperatures ice crystals are forming within extracelluar space in leaves. The growth of ice crystal is closely related to the degree of freezing injury. It was shown that an antifreeze protein binds to an ice nucleator through hydrogen bonds to prevent growth of ice crystal and also reduces freezing damage. The antifreeze proteins in plants are similar to PR proteins but only the PR proteins induced upon cold acclimation were shown to have dual functions in antifreezing as well as antifungal activities. Three of the genes encoded for CLP, GLP, and TLP were isolated from barley and Kentucky bluegrass based on amino acid sequence revealed after purification and low temperature-inducibility as shown in analysis of the protein. The deduced amino acid of the genes cloned showed a signal for secretion into extracellular space where the antifreezing activity sup-posed to work. The western analysis using the antisera raised against the antifreeze proteins showed a positive correlation between the amount of the protein and the level of freeze tolerance among different cultivars of barely. Besides it was revealed that TLP is responsible for a freeze tolerance induced by a treatment of trinexapac ethyl in Kentucky bluegrass. Analysis of an overwintering wild rice, Oryza rufipogon also showed that an acquisition of freeze tolerance relied on accumulation of the protein similar to CLP. The more direct evidence for the role of CLP in freeze tolerance was made with the analysis of the transgenic tobacco showing extracellular accumulation of CLP and enhanced freeze tolerance measured by amount of ion leakage and rate of photosynthetic electron transport upon freezing. These antifreeze proteins genes will be good candidates for transformation into crops such as lettuce and strawberry to develop into the new crops capable of freeze-storage and such as rose and grape to enhance a freeze tolerance for a safe survival during winter.