• 전기학회논문지
• /
• 제64권5호
• /
• pp.718-725
• /
• 2015

This paper proposes a novel level-shifted PWM (LS-PWM) strategy for fault tolerant cascaded multilevel inverter. Most proposed fault-tolerant operation methods in many of studies are based on a phase-shifted PWM (PS-PWM) method. To apply these methods to multilevel inverter systems using LS-PWM, two additional steps will be implemented. During the occurrence of a single-inverter-cell fault, the carrier bands scheme is reconfigured and modulation levels of inverter cells are reassigned in this proposed fault-tolerant operation. The proposed strategy performs balanced three-phase line-to-line voltages and line currents when a switching device fault occurs in a cascaded multilevel inverter using LS-PWM. Simulation and experimental results are included in the paper to verify the proposed method.

• 한국물환경학회지
• /
• 제39권4호
• /
• pp.288-301
• /
• 2023

This study aims to identify benthic macroinvertebrate fauna inhabiting at the mountain valley stream (Mt. Cheonggye) in Korea and the relationship between physical environmental factors and biological indices. Benthic macroinvertebrates were collected at five locations on August 24 and October 14, 2020, and were identified as 4 phyla, 7 classes, 16 orders, 42 families, and 72 species. Dominance ranged from 0.38 to 0.59, diversity 2.81 to 3.75, richness 3.25 to 4.63, evenness 0.65 to 0.84, and %EPT (Ephemeroptera-PlecopteraTrichoptera) richness value 42% to 73%, respectively. All sites were evaluated as a very good status by mostly biological indices based on tolerance of indicator organisms in Korea. As a result of principal component analysis, biological indices are classified into species-level indices and higher cartegory-level indices according to the taxonomic level of the indicator organism considered in each index. As a result of canonical correspondence analysis, it was confirmed that current velocity was a major factor that increased species richness and classified biological indices according to taxonomic category level. Water depth was a major factor related to the community indices, and the deeper the water depth, the lower the diversity and the evenness.

• Journal of Microbiology and Biotechnology
• /
• 제17권1호
• /
• pp.176-179
• /
• 2007

An electron paramagnetic resonance (EPR) signal characteristic of the 5,5'-dimethyl-l-pyrroline-N-oxide (DMPO)-OH spin adduct, which is formed from the reaction of DMPO with superoxide radicals generated by xanthine oxidasemediated reaction, was significantly reduced by the cadaverine or Escherichia coli Mn-containing superoxide dismutase (MnSOD). Likewise, cytochrome c reduction by superoxide was inhibited by cadaverine, and the inhibition level increased in proportion to the level of cadaverine. The cadA mutant of Vibrio vulnificus, which does not produce cadaverine because of the lack of lysine decarboxylase, exhibits less tolerance to superoxide stress in comparison with wild type. The results indicate that cadaverine scavenges superoxide radicals, and protects cells from oxidative stress.

• Journal of Communications and Networks
• /
• 제11권1호
• /
• pp.1-10
• /
• 2009

In this paper, we propose a chip-level detection and a spectral-slice scheme for the tunable-transmitter/fixed-receiver (TTFR)-based asynchronous spectral phase-encoded optical codedivision multiple-access (CDMA) system combined with timeencoding. The chip-level detection can enhance the tolerance of multiple access interference (MAI) because the channel collision does not occur as long as there is at least one weighted position without MAI. Moreover, the spectral-slice scheme can reduce the interference probability because the MAI with the different frequency has no adverse effects on the channel collision rate. As a result, these techniques mitigate channel collisions. We analyze the channel collision rate theoretically, and show that the proposed system can achieve a lower channel collision rate in comparison to both conventional systems with and without the time-encoding method.

• 한국기계가공학회지
• /
• 제13권3호
• /
• pp.89-95
• /
• 2014

The increasing level of demand for multi-tasking machines requires a saddle with an ultra-precise machining accuracy level of $15{\mu}m$, as such a saddle is one of the main components of these machines. The manner of achieving ultra-precise machining accuracy mainly depends on the fixed forces. In this paper, we optimized the number of contact points and the contact positions to reduce the deformation of the saddle while it is machined. The performance levels of the proposed optimal jig and fixture are determined by measuring the flatness, parallelism and perpendicularity of a machined saddle. The machining accuracy is found to be lower than $15{\mu}m$ at all measured points.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.685-688
• /
• 2002

In this paper, it is reported that the anode current changes at the constantly applied gate voltages and the current-voltage (I-V) characteristics of Si, Co silicide and Mo silicide field emitter arrays (FEAs) depending on vacuum level from a $10^{-9}$ torr to a $10^{-6}$ torr. The mechanism of the robustness of anode current degradation of Mo silicide FEAs under poor vacuum conditions can be explained by the model of tolerance for the oxygen adsorption and oxidation at the silicide surface. Also, we present the changes of emitting area and work function of the emitters according to vacuum level.

• 한국정밀공학회지
• /
• 제32권1호
• /
• pp.83-88
• /
• 2015

At the early stages of engineering design, a number of design concepts may be suggested. With a great degree of freedom, making a good choice may be a challenge at this stage. In this study, a simplified evaluation criterion for design concepts is presented based on cost, simplicity and safety. Cost is estimated by the amount of materials and the required level of tolerance. Simplicity is represented by the number of parts, assembly steps, and fasteners. Safety is assessed by the level of potential failure. The proposed criterion is applied to an example design of driving mechanisms for cervical vertebrae massage machine.

• 한국산업융합학회 논문집
• /
• 제8권3호
• /
• pp.161-168
• /
• 2005

This study is analysis for adjacent structures and ground movement by deep excavation work. Underground Inclinometer has shown that deformation of increment is minor within to allowable limit. According to the measurements result of slope and crack for adjacent structures, a detached house showed bigger than hospital structure to deformation of increment. Variation of underground water level didn't effect so much to ground and adjacent structures movement because underground water flows in rock and didn't give the water press to propped walls. Measurement data of strut variation is within tolerance limit. Because excavation site's wall was strengthened suitably. This study will contribute in establishment of measurement standard and information-oriented construction during deep excavation in multi-layered ground including rock masses.

• 한국정보보호학회:학술대회논문집
• /
• 한국정보보호학회 1995년도 종합학술발표회논문집
• /
• pp.163-172
• /
• 1995

In this paper, the bit-level 1-dimensionl systolic array for modular multiplication are designed. First of all, the parallel algorithms and data dependence graphs from Walter's Iwamura's methods based on Montgomery Algorithm for modular multiplication are derived and compared. Since Walter's method has the smaller computational index points in data dependence graph than Iwamura's, it is selected as the base algorithm. By the systematic procedure for systolic array design, four 1-dimensional systolic arrays ale obtained and then are evaluated by various criteria. Modifying the array derived from 〔0,1〕 projection direction by adding a control logic and serializing the communication paths of data A, optimal 1-dimensional systolic array is designed. It has constant I/O channels for modular expandable and is good for fault tolerance due to unidirectional paths. And so, it is suitable for RSA Cryptosystem which deals with the large size and many consecutive message blocks.

• 전자공학회논문지B
• /
• 제33B권9호
• /
• pp.62-69
• /
• 1996

In this paper, the bit-level 1-dimensional systolic array for modular multiplication is designed. First of all, the parallel algorithm and data dependence graph from walter's method based on montgomery algorithm suitable for array design for modular multiplication is derived. By the systematic procedure for systolic array design, four 1-dimensional systolic arrays are obtained and then are evaluated by various criteria. As it is modified the array which is derived form [0,1] projection direction by adding a control logic and it is serialized the communication paths of data A, optimal 1-dimensional systolic array is designed. It has constant I/O channels for expansile module and it is easy for fault tolerance due to unidirectional paths. It is suitable for RSA cryptosystem which deals iwth the large size and many consecutive message blocks.