• Journal of Oral Medicine and Pain
• /
• v.41 no.2
• /
• pp.61-71
• /
• 2016

Purpose: This study was designed to evaluate the comparison between the subjective and the objective evaluation of pain control effect in masticatory muscle pain depending on time and dose change. Methods: The patients were recruited to this study and diagnosed according to the Research Diagnostic Criteria for Temporomandibular Disorders (RDC/TMD). Experimental group were divided into three groups; saline injection group (n=10), morphine 1.5 mg injection group (n=10), and morphine 3.0 mg injection group (n=10). Evaluation list was the subjective pain evaluation (visual analogue scale, McGill pain questionnaire) and the objective pain evaluation (pressure pain threshold [PPT], pressure pain tolerance [PTO]). The subjective and the objective pain evaluation were performed at the times of just before injection, 10 minutes, 30 minutes, 1 hour, 24 hours, and 48 hours after injection. Then, data were statistically analyzed. Results: The results were as follows: 1) There is no statistically significant difference between the results of the subjective and the objective pain evaluation with regard to the short-term (within 1 hour) analgesic effect of morphine sulfate. 2) However, after 1 hour of injection, while the subjective pain evaluation score still decreased, the objective pain evaluation didn't show significant changes in PPT and PTO (1 hour, p<0.05; 24 hours, p<0.01; 48 hours, p<0.001). 3) In comparison to changes in the dose, the McGill pain questionnaire was the most statistically effective method among the subjective pain evaluations (1.5 mg, p<0.05; 3 mg, p<0.01). Conclusions: Therefore, it was revealed that the subjective pain evaluation was more effective to evaluate long-term pain control, and that the McGill pain questionnaire could be an effective way to evaluate pain control depending on dose changes. It requires further investigations with time and dose extension.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.2
• /
• pp.51-59
• /
• 2017

This study evaluated the drought tolerance of Liriope platyphylla F.T.Wang & T.Tang, Dendranthema zawadskii var. lucidum (Nakai) J.H.Park, Hosta longipes (Franch. & Sav.) Matsum., Sedum sarmentosum Bunge and Zoysia japonica Steud. for an extensive green roof. In order to assess drought tolerance of green roof plants, several criteria were measured such as volumetric water content, leaf and soil moisture potential, chlorophyll a and b, chlorophyll fluorescence, photosynthesis, stomatal conductance, transpiration rate and antioxidants. The results of the drought tolerance measurement of green roof plants focused on the gradually withering of plants from lack of volumetric water content. D. zawadskii was the first to show an initial wilting point, followed by Z. japonica, H. longipes and L. platyphylla in order while S. sarmentosum showed no withering. It was concluded that H. longipes, L. platyphylla and S. sarmentosum were highly drought tolerant plants able to survive over three weeks. Furthermore, chlorophyll a and b were divided into two types: Type I, which kept regular content from the beginning to the middle of the period and suddenly declined, like H. longipes and Z. japonica; and Type II, which showed low content at the beginning, sharply increased at the middle stage and decreased, like D. zawadskii, L. platyphylla and S. sarmentosum. Volumetric water content and the amount of evapotranspiration consistently declined in all plant species. The analysis of chlorophyll fluorescence results that S. sarmentosum, which had relatively high drought tolerance, was the last to decline, while Z. japonica and S. sarmentosum withered after rapid reduction. At first, photosynthesis, stomatal conductance and transpiration rate showed high activity, but they lowered as the plant body closed stomata owing to the decrease in volumetric water content. Measuring antioxidants showed that when drought stress increased, the amount of antioxidants grew as well. However, when high moisture stress was maintained, this compound was continuously consumed. Therefore, the variation of antioxidants was considered possible for use as one of the indicators of drought tolerance evaluation.

• Archives of design research
• /
• v.19 no.3 s.65
• /
• pp.19-30
• /
• 2006

This study was carried out to present design guidelines for developing electric bikes which could be used for more users regardless of gender and age. Through a survey with 336 male and female respondents in Seoul aged between 10s and 70 years or older, the convenience of bicycle use and image preference by gender and age were investigated. To evaluate convenience of bicycle use, the 7 principles of universal design made by Universal Design Center were customized to fit for accessing bicycles. The following are results of statistical analysis on 301 valid data: (1) of the 7 principles, conventional bicycles were identified to be the most inconvenient in principle 6(low physical effort), followed by in principle 5(tolerance for error) and 7(size and space for approach and use). Women appeared to feel more inconvenience than men in all evaluation criteria while using bicycles. The relation between the convenience of use and users' age was not identified. (2) Preferred images by bicycle users turned out to be those of 'simple' and 'light.' By gender, male preferred more 'technical' and 'dynamic' images than female. By age, users in their 10s-20s preferred more 'individual' image than 70 years or older.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.5
• /
• pp.764-772
• /
• 2003

Two genetic constructs used to confer improved agronomic characteristics, namely herbicide tolerance (HT) in maize and soyabean and insect resistance (Bt) in maize, are considered in respect of feeding to farm livestock, animal performance and the nutritional value and safety of animal products. A review of nucleic acid (DNA) and protein digestion in farm livestock concludes that the frequency of intact transgenic DNA and proteins of GM and non-GM crops being absorbed is minimal/non existent, although there is some evidence of the presence of short fragments of rubisco DNA of non-GM soya in animal tissues. It has been established that feed processing (especially heat) prior to feeding causes significant disruption of plant DNA. Studies with ruminant and non-ruminant farm livestock offered GM feeds demonstrated that animal performance and product composition are unaffected and that there is no evidence of transgenic DNA or proteins of current GM in the products of animals consuming such feeds. On this evidence, current HT and Bt constructs represent no threat to the health of animals, or humans consuming the products of such animals. However as new GM constructs become available it will be necessary to subject these to rigorous evaluation.

• Proceedings of the Korea Contents Association Conference
• /
• 2003.11a
• /
• pp.290-297
• /
• 2003

A time-series database is a set of data sequences, each of which is a list of changing values corresponding to an object. Subsequence matching under time warping is defined as an operation that finds such subsequences whose time warping distance to a given query sequence are below a tolerance from a time-series database. In this paper, we first point out the characteristics of the previous methods for time-series sequence matching under time warping, and then discuss the approaches for applying them to whole matching as well as subsequence matching. Also, we perform quantitative performance evaluation via a series of experiments with real-life data. There have not been such researches in the literature that compare the performances of all the previous methods of subsequence matching under time warping. Thus, our results would be used as a good reference for showing their relative performances.

• Design & Manufacturing
• /
• v.13 no.4
• /
• pp.51-56
• /
• 2019

Due to industrial development, the importance of GD&T tolerance is growing day by day. Roundness measurement means the size deviated from the ideal circle. Roundness evaluation methods include LSCI, MZCI, MCCI, and MICI. Generally, A is used a lot at industrial evaluation. In this experiment, we studied the variations in table velocity, filter values, and detector angles, which can cause errors in roundness measurements. The measurement conditions were table speeds of 10, 30 and 60 mm/s, probe angles of 10, 20 and 30 degrees and frequency filter settings of 15, 150 and 500 upr and The number of experiments was measured 30 and the average value was chosen as a representative value. The hypothesis test showed that the p-value for the frequency filter was greater than 0.05, and the experiment rejected the null hypothesis and adopted the alternative hypothesis.

• Plant Biotechnology Reports
• /
• v.2 no.1
• /
• pp.47-58
• /
• 2008

To select agronomically useful transgenic plants, a large number of transgenic events are initially produced, gene transfer confirmed, and advanced to obtain homozygous lines for testing in field trials. Direct in planta assays for identifying the transgene carriers in the segregating progeny are based on the activity of selectable marker gene and are easy, simple and inexpensive. For this purpose, expression of bar gene as measured by tolerance to damage by glufosinate ammonium, the active ingredient in the herbicide BASTA, was investigated. Dose damage curves were generated by leaf paint tests with BASTA on four genotypes of sorghum. Transgenic plants were characterized in terms of sensitivity to the concentration of glufosinate ammonium. In transgenics, symptoms of BASTA swab tests at different growth stages and PCR analysis for cry1B were carried out and correlated. Germination tests could not be employed for large scale evaluation of transgenic progeny because of mortality of tolerant seedlings after transplantation to soil. Based on the above findings, a simple, inexpensive, time-saving, two-step scheme for effective evaluation of transgenics and their progeny containing bar gene as selection marker using BASTA swab tests is described.

• Journal of Auto-vehicle Safety Association
• /
• v.10 no.4
• /
• pp.54-59
• /
• 2018

While the advanced trffic environment systems are developed recently, the traffic systems for transportation vulnerable are still under development and their social life are limited as well. In order to the secure their mobility rights, it had been required to set up the particular system for the traffic welfare. One of the significant items is the express bus operation for wheelchair users. Thus, the research of development and operation for express buses with wheelchair users was funded by the Korean government. Before the express bus development for wheelchair users based on the current bus model, this study set up the evaluation method for the bus rollover characteristics to ensure occupant safety using the finite element method. The partial bus model was developed corresponding to the full bus model response under rollover event and the evaluation method based on two model (full bus model and partial bus model) responses is planned to apply the model development of express bus modification for wheelchair users.

• Journal of recreation and landscape
• /
• v.12 no.4
• /
• pp.35-44
• /
• 2018

The purpose of this research is to evaluate Seoullo 7017 based on Universal Design (UD) principles and guidelines. To derive UD principles applicable to the site context, we used the 2017 Seoul Universal Design Guideline and assessment index provided by the Universal Design Research Center and established 11 evaluation criteria. With respect to research methods, a literature review and on-site field survey were applied, through which we derived UD principles and evaluation criteria to identify UD problems. The 11 evaluation criteria consist of pedestrian space, facilities, access, main entrance, parking lots, trails, restrooms, convenience facilities, information facilities, rest areas, and playgrounds, and these were associated with UD principles for evaluation. As a result, the main entrance had the highest UD score, while parking lots had the lowest in terms of equity, safety, simplicity, and accessibility. Restrooms received a lower UD score because of poor conditions of security and alert systems. Rest areas were found to be uncomfortable for disabled people. With respect to the internal trails, we found the lack of braille block and irregular placement of planting pots made blind people uncomfortable when walking. In terms of UD principles, flexibility received the highest score, followed by amenity, equity, simplicity, tolerance, accessibility, and safety. Flexibility received the highest score, owing to the provision of proper information about convenience facilities and trails, while safety received the lowest, based on poor access to parking lots, inadequate paving materials and colors, and a lack of 24-hour security systems. We hope this research contributes to improving the universal design, so that people are not discriminated against in the use of the park in terms of age, sex, or physical disability. We expect the study to help facilitate empirical studies to verify UD principles and provide improved quality of UD for Seoullo 7017.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.4
• /
• pp.173-179
• /
• 2013

Even though a rough diamond shape is irregular and rugged, it is easy to be processed to make gem, shaped facets (table, crown, pavilion and girdle) were precisely treated because they influence on the evaluation of diamond grading. Those specifications suitable for the standard round brilliant cut diamond polishing were investigated and in 95 % statistical confidence interval, standard deviation, mean and acceptable tolerance were examined. According to these variables (size, angle, depth, and thickness) distribution, the frequency analysis of ratings and proportions were compared with each other. The correlation between each variables and the evidence of influence represented in proportion were determined by the regression analysis applying LSM (Least Square Method). In this research, it was recognized that table sizes of the diamond jewels and pavilion depth (in %) influence the rating decision and in particular, the depth of pavilion acting as the main factor of proportions, also plays an important role in optical phenomena.