• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.4
• /
• pp.439-442
• /
• 2013

This study was conducted to develop the testing method for excessive water tolerance at germinating stage and to screen 31 domestic peanut cultivars. Regardless of peanut grain scales, the amount of seed absorption nearly reached the peak in 10 hours after imbibition. When peanut seed in vermiculate soil was directly soaked in water, ability of emergence did not reduced until 16 days and then sharply reduce to 25 days with non-emergence. When seeds germinated for 1, 2, 3, and 4 days after seeding (DAS) were soaked, the emergence abilities were distinctively varied according to the sequent soaking days such as 1, 2, 3, 4, and 5 days. This explained the negative relationship between first germinating days (DAS) and following soaking days. Using the method of 2 day germinating and 3 day soaking that show less than 70% of emergence ability, 31 peanut cultivars were applied to test excessive water tolerance. Emergence rates varied 0% to 69% according to cultivar. Cultivar Daekwang, Sinkwang, Daecheong and Baekseon had over 50% emergence rates. These results suggested that the degree of water resistance in germinating stage may be important point to evaluate the excessive water resistance among cultivars.

• Korean Journal of Soil Science and Fertilizer
• /
• v.20 no.4
• /
• pp.369-374
• /
• 1987

This study was conducted to evaluate the degree of acid tolerance of indigenous Rhizobium in natural soils, and to select the superior Rhizobia for legume forage on hilly land. 153 Rhizobial strains isolated from two host genera, Medicago and Trifolium in the pastures of Yeongnam area were screened on acidic agar plates. The results obtained are summarized as follows: 1. The degrees of acid tolerance of R. meliloti and R. trifolii were ranged from 4.3 to pH 5.5 and from 4.0 to pH 5.5 respectively. 2. Among acid tolerant Rhizobia isolates, two strains of R. meliloti at pH 4.3 and three strains of R. trifolii at pH 4.0 were shown to have the activities of nodulation and nitrogenase. 3. R. trifolii strains were shown to survive about 80 to 99% at the pH range 4.8 to 5.0, while R. meliloti were about 35 to 47% at that pH range. Therefore, more acid tolerant R. meliloti should be developed for legume forage in Korean hilly land.

• Horticultural Science & Technology
• /
• v.29 no.6
• /
• pp.561-567
• /
• 2011

Cold tolerance of the native Rhododendron species which are on the verge of extinction in Korean nature were compared with the introduced species and its mechanism were studied physiologically with the investigation of the leaf angle, leaf curling, and photosynthetic activity. The degree of cold tolerance measured with the leaf burning after winter season was higher in the native species, Rhododendron brachycarpum and Rhododendron brachycarpum var. roseum than all the introduced species. 'Nova Zembla', an introduced species, showed high sensitivity to the low temperature. Changes in leaf angle by the low temperature were bigger in 2 native species and 'Parker's Pink' than the other introduced species and small comparatively in 'Nova Zembla' and 'Cunningham's White' cultivar. Leaf curling also occurred strongly in 2 native species by the low temperature. While, it was comparatively little and mild in the other introduced species. Therefore these results suggested that the leaf movement such as leaf angle change and curling adapted to the low temperature is positively related to the cold tolerance of 2 native species. By the way, such relationship is not explainable in the cold-sensitive 'Parker's Pink' cultivar showing comparatively stronger leaf movement. Photosynthetic activity measured before the winter season was high in the cold-tolerant R. brachycarpum and its recovery after winter season was faster in the 2 native species and the introduced 'Cynosure' cultivar than the other introduced species. They were the lowest in the most cold-sensitive 'Nova Zembla'. This phenomena occurred similarly even in the stomatal conductivity, suggesting that the movement of water from the roots to the leaves is better and then the leaf burning after winter season become small in the cold-tolerant species. The recovery of photosynthetic activity and stomatal conductivity was comparatively slower in the cold-sensitive 'Parker's Pink'. From the above results, leaf behavior adapted to the low temperature during the winter season and water movement to the leaves are related collectively to the cold tolerance represented as the leaf burning in the Rhododendron species is suggested.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.12
• /
• pp.7351-7354
• /
• 2013

Background: Metabolic syndrome (MetS) is a multifactorial disease characterized by impaired glucose tolerance/diabetes, obesity, high triglyceride levels, low HDL levels, and hypertension. In this study we evaluate the relationship between tumor size and grade, and presence of the metabolic syndrome in patients with renal cell carcinoma. Materials and Methods: Between 2007-2013, radical nephrectomy was performed for 310 patients with renal tumors in our clinic and those with pathology reported renal cell carcinoma were enrolled and divided into two groups, with and without metabolic syndrome diagnosed on the basis of the National Cholesterol Education Program (NCEP) Adult Treatment Panel III (ATP III) criteria. The relationship between tumor size and grade of the two groups (Fuhrman nuclear degree) was evaluated statistically. Results: The metabolic syndrome was found in 70 patients, with a mean age of 65.5 (40-87), as compared to 58.8 (31-84) years in the non-metabolic syndrome group. Tumor size over 7 cm was found in 54% and 33%, respectively, and tumor grade over Fuhrman 3 in 56% and 32% of patients. Patients with metabolic syndrome had significantly higher tumor size and grade (p<0.05). In the presence of hypertension, diabetes and high triglyceride levels, significant assocations were again observed (p<0.05). Tumor size and degree also increased with increasing body mass index but this was not statistically significant (p>0.05). Conclusions: Renal cancer is more aggressive in patients with metabolic syndrome. Lifestyle and risk factors were revealed to be significant influences in renal cancer patients.

• Electrical & Electronic Materials
• /
• v.10 no.6
• /
• pp.519-527
• /
• 1997

The micro crack was occurred where the stress concentrated by the thermal stress which was induced during the cooling period after molding process or by the various reliability tests. In order to estimate the possibility of development from inside micro crack to outside fracture, the fracture toughness of EMC should be measured under the various applicable condition. But study was conducted very rarely for the above area. In order to provide a was to decide the fracture resistance of EMC (Epoxy Molding Compound) of plastic package which is produced by using transfer molding method, measuring fracture is studied. The specimens were made with various EMC material. The diverse combination of test conditions, such as different temperature, temperature /humidity conditions, different filler shapes, and post cure treatment, were tried to examine the effects of environmental condition on the fracture toughness. This study proposed a way which could improve the reliability of LOC(Lead On Chip) type package by comparing the measured $J_{IC}$ of EMC and the calculated J-integral value from FEM(Finite Element Method). The measured $K_{IC}$ value of EMC above glass transition temperature dropped sharply as the temperature increased. The $K_{IC}$ was observed to be higher before the post cure treatment than after the post cure treatment. The change of $J_{IC}$ was significant by time change. J-integral was calculated to have maximum value the angle of the direction of fracture at the lead tip was 0 degree in SOJ package and -30 degree in TSOP package. The results FEM simulation were well agreed with the results of measurement within 5% tolerance. The package crack was proved to be affected more by the structure than by the composing material of package. The structure and the composing material are the variables to reduce the package crack.ack.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.5
• /
• pp.1116-1121
• /
• 2014

Mesh structure is one of typical interconnection networks, and it is used in the part of VLSI circuit design. Torus and Hyper-Torus are advanced interconnection networks in the part of diameter and fault-tolerance of mesh structure. In this paper, we will analyze embedding between Torus and Hyper-Torus networks. We will show T(4k,2l) can be embedded into QT(m,n) with dilation 5, congestion 4, expansion 1. And QT(m,n) can be embedded into T(4k,2l) with dilation 3, congestion 3, expansion 1.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1231-1234
• /
• 2003

A sensor working in outdoor may generate some faulty signal owing to dust and high temperature. This paper describes an intelligent sensor system and controller which has a reconstruction mechanism for faulty signal. The faulty signals are dievided into two types as linear distortion and non linear distortion, respectively. The linear distorted signal is due to dust, and non linear distorted signal is due to physical breakdown of sensor or high temperature. These distorted signal have been reconstructed by the proposed method based on polynomial regression method and principal component analysis approach.. The proposed method has been applied to sun tracking system working in outdoor. For a robust and precision control of sun tracker, a fuzzy controller was also proposed. The fuzzy controller controls the tracker by using the collected sensor signal. The tolerance of the position control is within 1.5 degree. To show the validity of the developed system, some experiments in the field were illustrated.

• Korean Journal of Computational Design and Engineering
• /
• v.11 no.1
• /
• pp.1-10
• /
• 2006

This paper addresses B-spline curve approximation of a set of ordered points to a specified toterance. The important issue in this problem is to reduce the number of control points while keeping the desired accuracy in the resulting B-spline curve. In this paper we propose a new method for error-bounded B-spline curve approximation based on adaptive selection of dominant points. The method first selects from the given points initial dominant points that govern the overall shape of the point set. It then computes a knot vector using the dominant points and performs B-spline curve fitting to all the given points. If the fitted B-spline curve cannot approximate the points within the tolerance, the method selects more points as dominant points and repeats the curve fitting process. The knots are determined in each step by averaging the parameters of the dominant points. The resulting curve is a piecewise B-spline curve of order (degree+1) p with $C^{(p-2)}$ continuity at each knot. The shape index of a point set is introduced to facilitate the dominant point selection during the iterative curve fitting process. Compared with previous methods for error-bounded B-spline curve approximation, the proposed method requires much less control points to approximate the given point set with the desired shape fidelity. Some experimental results demonstrate its usefulness and quality.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.5
• /
• pp.698-707
• /
• 1998

A simplified model for predicting microsegregation during columnar-dendritic solidification of binary alloys is developed, in which back diffusion, dendrite arm coarsening and dendrite tip undercooling are simultaneously incorporated. The inclusion of tip undercooling is accomplished by modifying the initial conditions of the existing solute diffusion model, in such forms that tip undercooling depresses the beginning of solidification below the liquidus temperature, and that the secondary arm spacing evolves in accordance with the minimum undercooling theory. Sample calculations for the well-known benchmark system show that the present predictions not only consist with the extablished limiting cases, but also agree favorably with the available experimental data within a reasonable tolerance. In particular, a typical decreasing trend in the eutectic fraction at high cooling rates is successfully resolved. Comparison of the individual and combined effects of characteristic parameters in reference with the limiting cases reveals the interactions among parameters. Every parameter plays the role of reducing the eutectic fraction, and the degree of influence depends primarily on the cooling rate. Coarsening enhances the effect of tip undercooling, while suppressing that of back diffusion. A vigorous back diffusion seems to restrain the apperance of the undercooling effect. Overall, each contribution of the three parameters to microsegregation is estimated to be of the same order, which suffices to justify the present study.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.10
• /
• pp.1632-1646
• /
• 2010

This article is an analysis of the fit preference of the knitted jacket according to body types for 30's and 40's adult women through a comparison of real and virtual fit. A five point likert scale was used to evaluate the degree of the preference of real and virtual fit. The data were analyzed with t-test and ANOVA using statistical program SPSS 17.0. The results are as follow. 1. The real and virtual fit preference of the knitted jacket according to body types indicates that respondents preferred pattern 2 for body type N than the rest of the patterns; however, respondents preferred pattern 3 for body type A and H. 2. There were no significant differences between real and virtual fit preference. 3. It is necessary that the knitted jacket follow a similar size tolerance like a woven jacket. The results show that the next generation of virtual try-on systems need the development of a minus clothing ease scale.