• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 I
• /
• pp.419-426
• /
• 2001

Industrial products determined by fixed size posses definite limits variety by manufacture tolerance in existence. The optimum value solved by deterministic approaches do not account of tolerance bands of design variables and material properties. If we examine optimum value considering tolerance bands of design variables and material properties, it might be useless, owing to exist infeasible region. We have two ways to prevent being useless value. The one is to minimize tolerance band, the other is to consider tolerance band in optimum design. The former needed more accuracy during manufacturing process require higher production cost, the letter is more appropriate to consider tolerance band. In this research, we consider the tolerance bands of all variables, which might have the tolerance bands used in the problem, based on optimum value of deterministic approaches. Orthogonal arrays are used to minimize the number of trial. Tolerance bands are supposed discretionary according to design variable. Appropriateness suggested by this research is examined through two examples. Mathematical problem is investigated only in terms of tolerance bands of design variables, and cantilever beam problem is explained through tolerance bands of design variable, material properties and loading conditions. It is proved that values from the presented method are satisfactory for tolerance bands of variables.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1994년도 춘계학술발표회
• /
• pp.43-48
• /
• 1994

A wide band design method of an electromagnetic wave absorber using exponentially tapered ferrite which has very wide band frequency characteristics is proposed and discussed. The wide band electromagnetic wave absorber can be designed by the proposed equivalent material constants method for the regions varying spatially in the shape of ferrite. Furthemore the wide band ferrite electromagnetic wave absorbers with taper which have not only excellent reflectivity frequency characteristics but also the band width of 30MHz to 2150 or 2450MHz under the tolerance limits of -20dB reflectivity were designed.

• 한국항해학회지
• /
• 제18권2호
• /
• pp.151-158
• /
• 1994

A wide band design method of an electromagnetic wave absorber using exponentially tapered ferrite, which has very wide band frequency characteristics, is proposed and discussed. The wide band electroma-gnetic wave absorber can be designed by the proposed equivalent material constants method for the re-gions varying spatially in the shape of ferrite. Futhermore, the wide band ferrite electromagnetic wave absorber with taper, which have not only exce-llent reflectivity frequency characteristics but also the band width of 30MHz to 2150 or 2450MHz under the tolerance limits of -20dB reflectivity, were designed.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1994년도 추계학술발표회
• /
• pp.59-68
• /
• 1994

A wide band design method of an double layerred electromagnetic wave absorber sintered ferrite which has a flat and an anti-grid shape layers is proposed and discussed. The wide band electomagnetic wave absorber can be designed by the equivalent material constants method for the each layer, As a result the wide band ferrite electonmagnetic wave absorber with the band width of 30MHz to 3670, 3680 or 3690MHz were designed under the tolerance limits of -20dB reflectivity.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.750-752
• /
• 2003

This paper presents a method of tolerance analysis for a electric machine. Tolerance analysis technique is required to find the tolerance band of design variables and estimate the characteristic distribution of the electric machine, because that manufacturing tolerances as well as measuring errors have a great influence on the electric machine. Therefore, this paper introduces Stochastic Response Surface Methodology to achieve the tolerance analysis. As an example, the tolerance analysis is applied to the analysis of torque characteristics for a BLDC motor from the electric point of view.

• 한국정보전자통신기술학회논문지
• /
• 제15권2호
• /
• pp.109-116
• /
• 2022

본 논문에서는 센서 시스템에 유입된 60Hz 라인 주파수 잡음의 영향을 효과적으로 제거하기 위한 상태 변수 필터(state variable filter, SVF) 구조의 대역 억제 필터(band rejection filter, BRF)를 제안한다. 기존 SVF 구조의 BRF는 추가적인 연산 증폭기(operational amplifier, OPAMP)를 사용하여 저역 통과 필터(low pass filter, LPF) 출력과 고역 통과 필터(high pass filter, HPF) 출력 간의 합 또는 입력 신호와 대역 통과 필터(band pass filter, BPF) 출력 간의 차를 구함으로써 구현한다. 따라서 BRF의 신호 감쇄를 결정하는 노치 주파수(notch frequency)와 노치 깊이(notch depth)가 신호의 합 또는 차를 구하는데 사용한 저항의 허용 오차(tolerance)에 크게 의존된다. 반면에 제안 된 BRF는 SVF 구조 내에 BRF 출력이 자연발생적으로 형성되기 때문에 각 포트 간의 조합이 필요 없게 되어 기존 BRF와 달리 노치 주파수와 노치 깊이가 저항의 허용 오차에 영향을 받지 않는다. 제안된 BRF의 노치 주파수는 59.99Hz이며 몬테 카를로 시뮬레이션 결과를 통해 저항의 허용 오차에 전혀 영향을 받지 않는 것을 확인할 수 있었다. 노치 깊이도 평균 -42.54dB, 표준편차 0.63dB를 가져 BRF로서 정상적인 동작이 가능함을 확인하였다. 또한 제안된 BRF를 가지고 60Hz 잡음에 간섭이 된 심전도 신호에 대하여 잡음 필터링을 적용한 결과를 보여주었으며 60Hz 잡음이 적절하게 억제되는 것을 확인할 수 있었다.

• 대한기계학회논문집A
• /
• 제27권6호
• /
• pp.905-913
• /
• 2003

Generally, most of optimization have been performed with fixed sizes and variables. But, the optimum value considering tolerance of design variables and material properties, might be useless owing to exist in infeasible region. It is needed that the tolerance of design variables and material properties is considered for a real design problem. A deterministic optimal solution can be in the feasible region by performing robust optimization considering tolerance. In the paper, robust design is suggested to gain an optimum insensitive to variation of design variables and it is applied for optimization problem of caliper disc brakes for vehicles.

• Journal of the Optical Society of Korea
• /
• 제20권2호
• /
• pp.223-227
• /
• 2016

The impact of optical receiver configuration on in-band crosstalk-induced penalty has been investigated in both theoretical and experimental analyses, for differential phase-shift keying (DPSK) and differential quadrature phase-shift keying (DQPSK) signals. Previously it has been shown that DPSK signals are ~6 dB more tolerant to in-band crosstalk than on-off keying (OOK) signals. However, we find that the tolerance difference between the two signals is reduced to ~3 dB when the decision threshold of the receiver is optimized to minimize the bit-error rate for each signal. Then we derive simple equations for the in-band crosstalk-induced penalty in DPSK and DQPSK signals with two different optical receiver configurations: balanced and single-ended direct-detection receivers. We confirm that the penalties obtained from our simple equations agree well with the measured results.

• 한국항해학회지
• /
• 제14권1호
• /
• pp.9-19
• /
• 1990

Microwave absorbers for X-Band RADAR have been designed and fabricated trialy both in sheet and paint types, as a result of which the relative bandwidth of nearly 8% in both cases has been obtained under the tolerance limits of the reflection coefficients lower than -20dB. The matching thickness becomes 1.36 to 1.56mm which is significantly thinner than that of the conventional ones. Furthermore, it was shown that the microwave absorbing characteristics vary in accordance with the density and the mixing ratios of the materials constituting absorbs.

• 정보저장시스템학회논문집
• /
• 제1권1호
• /
• pp.67-72
• /
• 2005

This study proposes a design methodology to determine the optimum configurations of the optical flying head (OFH) for near-field recording systems. Since the OFH requires stricter static and dynamic characteristics of slider air-bearings within an optical tilt tolerance over the entire recording band, an optimum design to keep the focusing and tracking ability stable is essential. The desired flying characteristics considered in this study are to minimize the variation in flying height between the SIL and the disk from a target value, satisfying the restriction of the minimum flying height, to keep the pitch and roll angles within an optical tilt tolerance, and to ensure a higher air-bearing stiffness. Simulation results demonstrate the effectiveness of the proposed design methodology by showing that the static and dynamic flying characteristics of the optimally designed OFH are enhanced in comparison with those of the initial. The gap between the SIL and the disk can be kept at less than 100 nm even if the optical tilt tolerance of the SIL is considered.