• Physical Therapy Korea
• /
• v.14 no.3
• /
• pp.41-47
• /
• 2007

Dance movements consist of combinations of movements such as jumping, rotation, maintaining balance, leg lifts, and plantar flexion with toe shoes. Dance movements require great muscle strength of lower extremities as well as muscular endurance. The purposes of this study were to investigate correlation between the anthropometric variables and the peak torque in young female dancers and to identify variables that affect isokinetic peak torque. Twenty-six female dancers ($19.7{\pm}1.2$ years of age) performed concentric maximum force efforts on the knee extensors and flexors at $60^{\circ}/sec$ and $120^{\circ}/sec$, the ankle plantar flexors (PF) and dorsiflexors (DF) at $30^{\circ}/sec$ and $120^{\circ}/sec$. Antropometric variables such as age, height, weight, body mass index (BMI), thigh girth, calf girth and duration of dance training were measured. To identify antropometric variables related to muscle strength, Pearson correlations were computed and a stepwise multiple regression analysis was performed. Pearson correlation coefficients of Knee extensor at $60^{\circ}/sec$ and $120^{\circ}/sec$ revealed moderate positive associations with BMI and thigh girth. Pearson correlation coefficients of ankle PF revealed low-to-moderate positive associations with height. Ankle DF also revealed moderate positive associations with BMI and calf girth. The main predictor variables of knee extensor at 60/sec, were stepwise multiple regression, age, height, thigh and girth.

• KIEAE Journal
• /
• v.12 no.3
• /
• pp.89-94
• /
• 2012

The international community is paying close attention to the climatic changes caused by the meteorological anomalies. In response to such phenomena, after the adoption of the United Nations Framework Convention on Climate Change in 1992, efforts to actively respond to the meteorological changes are proliferating all over the world; even in the Republic of Korea, the issue to tackle the meteorological changes has emerged as a top-priority national agenda. In the year of 2008, after the declaration of the low-carbon, green-growth paradigm by the government, the UNFCCC COP15 has announced a 30% reduction target of the emission of the greenhouse gases by 2020 as compared to the "Business As Usual, BAU" and has also confirmed, as a commitment plan to achieve reduction in the emission of greenhouse gases, the reduction target of greenhouse gases for all sectors, industries and years. (26.9% for buildings) Since the construction of the new apartment houses in the year of 2001, the "Building Energy Efficiency Rating", has been applied to newly constructed building complexes, built in 2010; the accumulated emission reduction has been evaluated at around 450,000toe and the accumulated carbon dioxide emission reduction is at $826,000tCO_2$ And through the prediction of these values under various scenarios (New construction, new construction / expansion of existing uses, when transferred to 1stgrade), the effects on the degree of reduction of greenhouse gases by the increased certification of the Building Energy Efficiency Rating are an alyzed and it is our aim to express the importance of the certification system capable of carrying out a quantitative evaluation of the building energy in order to establish the strategy to reduce the emission of carbon dioxide.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.11
• /
• pp.1507-1519
• /
• 2005

The purpose of this study was to compare two methods of measuring body surface area (BSA). The BSA of Korean adults was measured using both three-dimensional (3D) scanning and an alginate method. Two males (one overweight and one lean) and one overweight female participated as subjects. The results were as follows: First, the 3D scanned BSA of all three subjects was smaller than the BSA measured using the alginate method by as much as $6-14\%$. The difference in methods was greater in the overweight participants than in the lean subject. Second, the results comparing the BSA obtained using these two methods and the BSA estimated by 10 previously developed formulas, showed that the 3D scanned BSA was the smallest among the 12 BSAs. Third, in comparing the regional differences between these two methods, the regional BSA of the lean subject (male 2) did not show any significant difference, but the overweight subjects (male 1, female 1) showed a significant difference. Forth, the biggest difference in regional BSA obtained through these two methods was in the hand, for all three subjects. The 3D scanned hand surface area was smaller than the hand surface area measured by the alginate method by as much as $24-34\%$. Fifth, in the percentage of regional BSA, there was no significant difference in these two methods. The reasons for the underestimation in the 3D scanning might be because: 1) the 3D scanner can not recognize the folding and shading of body parts, such as the finger, toe, ear, armpit, crotch and breast, 2) 3D patching and smoothing processes depend on researchers. However, the 3D scanning method is applicable to the estimation of the entire BSA, if the surface area of the hands is known, and the participant is not overweight.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.40 no.6
• /
• pp.1085-1099
• /
• 2016

This article is designed to establish fundamental design criterion for theme park cast costumes in accordance with play type and space. There is an understanding that theme parks act as a play space that is designed to meet diverse playing desires. To analyze cast costumes, the theme park - 'Everland' in South Korea as an example, area was divided into attraction space and non-attraction space. Attraction space is mainly for full-scale play content areas and the non-attraction space is to enforce the attraction space experience. Roger Caillois's play theory states that there are 4 play types; Illinx, Mimicry, $Ag{\hat{o}}n$, and Alea. All 4 play types were shown through attraction and Mimicry at non-attraction. Each cast costume was analyzed in terms of apparel design elements - silhouette, textile, color, detail, and props - related to play type facility and cast role. Criteria for theme park cast costume designs were suggested based on the results. Illinx cast members who fulfill a safety-checking role wear high chroma warm color costumes with the accent on details in bodice cutting lines, collar edges, pockets, buttons and decorative ornaments. A complementary contrast is also used. The guidance cast in Illinx may wear a suit in bright/vivid color. Mimicry guidance cast costumes show meticulous perfection in imitation with the figure in its space. From head to toe, color, textile, and silhouette - every detail and even props should match the character. $Ag{\hat{o}}n$ cast costumes are strictly limited in detail and decorative ornament usage as well as in color, since they are in charge of the management and operation of a competition. Alea cast's role is a self-demonstrator. Alea cast members should be a real tarot card reader. However, a manual should control their costumes. A total of 10 cast roles at a non-attraction space should be designed to show job patterns clearly in accordance with the whole theme at the park.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.35 no.2
• /
• pp.43-56
• /
• 1993

The laboratory tests are performed on how the liquefaction potential of the sea dike structures on the saturated sand or silty sand seabed could be affected due to earthquake before and after construction results are given as follows ; 1. Earthquake damages to sea dike structures consist of lateral deformation, settlement, minor abnormality of the structures and differential settlement of embankments, etc. It is known that severe disasters due to this type of damages are not much documented. Because of its high relative cost of the preventive measures against this type of damages, the designing engineer has much freedom for the play of judgement and ingenuity in the selection of the construction methods, that is, by comparing the cost of the preventive design cost at a design stage to reconstruction cost after minor failure. 2. The factors controlling the liquefaction potential of the hydraulic fill structure are magnitude of earthquake(max. surface velocity), N-value(relative density), gradation, consistency(plastic limit), classification of soil(G & vs), ground water level, compaction method, volumetric shear stress and strain, effective confining stress, and primary consolidation. 3. The probability of liquefaction can be evaluated by the simple method based on SPT and CPT test results or the precise method based on laboratory test results. For sandy or silty sand seabed of the concerned area of this study, it is said that evaluation of liquefaction potential can be done by the one-dimensional analysis using some geotechnical parameters of soil such as Ip, Υt' gradation, N-value, OCR and classification of soils. 4. Based on above mentioned analysis, safety factor of liquefaction potential on the sea bed at the given site is Fs =0.84 when M = 5.23 or amax= 0.12g. With sea dike structures H = 42.5m and 35.5m on the same site Fs= 3.M~2.08 and Fs = 1.74~1.31 are obtained, respectively. local liquefaction can be expected at the toe of the sea dike constructed with hydraulic fill because of lack of constrained effective stress of the area.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.24 no.2
• /
• pp.411-429
• /
• 2014

As cloud computing has enabled, a variety of cloud services has come into wide use. Thus, cloud computing products can be easily identified in the IT market. Common Criteria is international standards for security evaluation performed of IT products. In addition, Consumers can be used as a objective guideline for the evaluation results. And, it is a provides for protection profile(security target of security products). For general, IT products are providing the protection profile. However, for cloud-related products of protection profile is not being provided. Thus, about cloud security products, there is no way for evaluation. Therefore, in this paper, we propose protection profile on cloud database management system for the secure cloud environment in common criteria.

• Korean Journal of Applied Biomechanics
• /
• v.22 no.4
• /
• pp.387-394
• /
• 2012

The purpose of this study was to compare and analyze the finger pressure and kinematic variables in the forehand hairpin net shot between skilled elite players and less skilled recreational players. Eight elite players(age: $18.1{\pm}0.8yrs$, height: $176.8{\pm}1.5cm$, weight: $640.9{\pm}48.6N$) with minimum of 6 years of experience and eight recreational players(age: $27.9{\pm}1.6yrs$, height: $177.1{\pm}6.1cm$, weight: $820.5{\pm}62.8N$) with less than one year experience were recruited in this study. For each trial being analyzed, four critical instants were identified from the video recordings: Right heel contact1 (E1), Right toe-off (E2), Right heel contact2 (E3), and Shuttlecock Impact (E4). Each hairpin net shot was broken into consecutive phases: E1~E2 (Right Landing Phase: RLP), E2~E3 (Sliding Step Phase: SSP), and E3~E4 (Impact Phase: IP). Temporal parameters, shuttlecock speed, linear and angular kinematics of body segments, and finger pressures were computed for this study. The results showed that The finger pressure of the ring finger and the middle finger for the skilled group during an impact had significantly greater than those of unskilled group. It is possible that all fingers were not used in the same manner when the racket was gripped in forehand hairpin. The result also suggested that the ring finger and the middle finger pushed the racket from top to bottom while having the mid-phalanx and proximal phalanx of index finger as an axis.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.3
• /
• pp.71-82
• /
• 2008

W. S. CHAE, Ground Reaction Force Charateristics During Forward and Backward Walking Over 20 Degree Ramp. Korean Journal of Sport Biomechanics, Vol. 18, No. 3, pp. 71-82, 2008. The purpose of this study was to compare GRF characteristics during forward and backward walking over 20 degree ramp. Temporal parameters, GRFs, displacement of center of pressure (DCP), and loading and decay rates were determined for each trial. The results showed that the vertical GRF in BD during RTO was significantly greater than those found in FU. This reults indicated that GRF patterns may be changed by different walking conditions and altering position of ankle, knee, and center of mass throughout the walking cycle. The DCP during $RHC_2$-LHC in antero-posterior direction for downward was smaller than the corresponding value for upward condition. It' seems that the ankle and knee joints are locked in an awkward fashion at the toe contact to compensate for imbalance. Reducing the magnitude of loading rate can be achieved by walking in the backward direction. Accordingly, the results can be a benefit if one is suffering from an impact-type injury.

• Journal of Korean Society of Steel Construction
• /
• v.15 no.6 s.67
• /
• pp.629-637
• /
• 2003

This s paper presented the results of the three phases of fatigue tests to determine the fatigue strength of in-plane welded gusset joints, which are the most common details inevitably existing in the region of high stress range. A total of 57 fatigue specimens with varying thickness and strengths were made and tensile fatigue tests performed. One full-scale beam fatigue test was also performed. The validity of the fatigue strength of those details in the specification was confirmed, with the effects of thickness of flanges and welded attachments, length of attachments, and strength of applied steel examined. The characteristics of crack initiation and propagation were also observed. The test result was evaluated by comparing it with other test data and fatigue criteria of other countries. To determine the degree of stress concentration in the weld toe depending on geometric configuration such as attachment length and transition radius, analyses were performed. Compared to the present specification, analytical results indicate the need to revise and subdivide the detail categories.

• Archives of Plastic Surgery
• /
• v.37 no.6
• /
• pp.839-842
• /
• 2010

Purpose: Ganglion cysts of peripheral nerve are uncommon. Ganglion cysts located within the nerve and extraneural ganglia that cause symptomatic nerve compression have been reported. We report an unusual case of epineural ganglion cyst confined to the epineurium of the sural nerve at the foot. Methods: A 45-year-old woman was referred because of a mass on the foot. She had six months' history of pain and numbness in the right small toe. During the examination of the lesion, multinodular cystic mass was identified arising from the epineurium of the sural nerve. The nerve fascicles were compressed by the cyst, but the cyst wall clearly did not invade the fascicle. With the aid of surgical microscope, the epineural cyst was completely excised along with epineural tissue to which it was attached, and the sural nerve was decompressed. There was no relationship between the cyst and either the joint capsule or tendon sheath. Since the cyst was on the periphery of the nerve it was possible to remove the cyst intact without damaging the underlying fascicles. Results: The postoperative course was uneventful. Pathologic examination showed a ganglion cyst with a degenerated collagen fibers and contained a yellowish, jelly-like mucinous substance. No neural elements were identified within the cystic wall. Her sensory impairment improved progressively. At the 15 months follow-up, she was asymptomatic with no neurological deficits. Conclusion: Rarely, ganglion cysts can involve peripheral nerves, leading to varing degrees of neurological deficits. Intraneural intrafascicular ganglion may be difficult to separate from the neural elements without nerve injury. Epineural ganglion, subcategorized as intraneural extrafascicular ganglion, can be removed without damage to the underlying nerve.