• Journal of Korean Society of Steel Construction
• /
• v.10 no.3 s.36
• /
• pp.497-508
• /
• 1998

The objective of this study is to examine fatigue behavior of as-welded butt-welded joints with incomplete penetration from fatigue tests. The test results are the following. In static tests, tensile strength and yield strength of butt-welded joints are constant regardless of incomplete penetration. And in fatigue tests, fatigue strength of fully penetrated butt-welded joints satisfies fatigue limits, prescribed in Korean Specifications and JSSC, respectively. The results show that as the magnitude of incomplete penetration increases, fatigue strength decreases. In fractured surfaces, full and incomplete penetration specimen show different shapes, it is because that stress concentration factor vary with structural geometry in bead toe and root tip, and certify in FEM analysis. This study suggests that defects such as incomplete penetration from welding must be avoided in order to attain the sufficient life of steel structures.

• Journal of Korean Society of Steel Construction
• /
• v.16 no.3 s.70
• /
• pp.387-396
• /
• 2004

In this paper, stress analysis anda 3-point bending fatigue test were conducted on the full-scale specimen to investigate the effects of misalignment at the U-rib welded joint due to misfitting in the steel deck bridge. In addition, the researchers investigated the direction and starting point of fatigue cracks by SEM (Scanning Electron Microscope) and beach mark. The results of the stress analysis show that maximum stress occurred at the bottom corner of the U-rib, and that the stress was large when the magnitude of the misalignment was large. On the other hand, the results of the static loading test of the full-scale specimen show that stress was large at the bottom corner of the U-rib. In addition, fatigue life was short when the misalignment was large and fatigue life was short when the misalignment was large and fatigue life was short when the misalignment was large and fatigue life was large when the misalignment was small, as indicated by the results of both the static loading test and the fatigue test. From the observation of the failure surface, fatigue cracks began manifesting at the root of the base metal and proceeded to the bead surface (weld toe).

• Archives of Plastic Surgery
• /
• v.34 no.5
• /
• pp.593-598
• /
• 2007

Purpose: Talipes equinus deformity is defined as impossibility of heel weight-bearing and lacking of improvement of toe-tip gait despite sufficient duration of conservative treatment. The incidence of equinus deformity induces post-traumatic extensive soft tissue defect and subsequently increases it. Severe equinus deformities of the foot associated with extensive scarring of the leg and ankle were corrected using achilles Z-lengthening and free-tissue transfer. Methods: Free radial forearm flap was done in nine cases of eight patients from January 2000 to November 2006. Causes of deformity were post-traumatic contracture (one patient) and post-burn scar contracture (seven patients). Seven patients were male, one patient was female. Mean age was 32.1 (range, 10-57). Flap donors were covered with artificial dermis ($Terudermis^{(R)}$) and split thickness skin graft (five cases), and medium thickness skin graft only (four cases). Results: The size of flaps varied from $6{\times}12$ to $15{\times}12cm$ (average, $12{\times}7.8cm$). Achilles tendon was lengthened 4.2cm on average. Free radial forearm flap was satisfactory in all cases. All patients could ambulate normally after the surgery. Cases having donor coverage with $Terudermis^{(R)}$ were aesthetically better than those having skin grafts only. Conclusion: This study suggested that severe equinus deformities associated with extensive scarring of the leg and ankle can be corrected effectively free radial forearm flap and Achilles tendon lengthening.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.5
• /
• pp.583-590
• /
• 2008

Blasting has been applied in newly-built steel structures for cleaning forged surfaces and increasing the adhesive property of applied painting systems. However, the effect of the blast cleaning on fatigue behavior of welded joints is not clear. In this paper, fatigue tests were carried out on out-of-plane gusset welded joints and the effect of the blast cleaning on the fatigue behavior was studied. The curvature radius at the weld toe of the surface-treated specimens by using the blast method is larger than that of as-welded specimens. By the blast cleaning compressive residual stresses were induced into weld toes. The experimental results showed that the fatigue life of surface-treated specimens is longer than that of as-welded specimens, even though the fatigue life of surface-treated specimens and that of as-welded specimens are not clearly different in the high stress range. About a 160% increase in fatigue limit could be realized by using blast cleaning.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.19 no.1
• /
• pp.25-29
• /
• 2009

The purpose of this study was to investigate the effect of two different lifting posture on the plantar foot pressure, force and COP(center of pressure) trajectory path during object lifting. Fourteen healthy adults who had no musculoskeletal disorders were instructed to lift with two postures(stoop and squat) and two object weights(empty box and 10 kg box). Plantar foot pressures, forces and COP trajectory path were recorded by the F-mat system(Tekscan, Boston, USA) during object lifting with barefoot. Plantar foot surface was defined as seven regions for pressure measurement; two toe regions, three forefoot regions, one midfoot region and one heel region. Paired t-test was used to compare the outcomes of peak pressure and maximum force with different two lifting postures and two object weights. Plantar peak pressure and maximum force under hallux was significantly greater in squat posture than stoop posture during the two different boxes lifting(p<.05). During the empty box lifting, maximum force under lessor toes was significantly less and plantar peak pressure under second metatarsal region was significantly greater in squat than stoop(p<.05). Maximum force under heel was significantly less in squat than stoop posture during 10kg box lifting(p<.05). Finally, COP trajectory path was significantly greater in squat than stoop(p<.05). These findings confirm that there are significantly change in the structure and function of the foot during the object lifting with different posture. Future studies should focus on the contribution of both structural and functional change to the development of common foot problems in adults.

• Journal of the Korean Society of Safety
• /
• v.22 no.4
• /
• pp.57-65
• /
• 2007

Effects on the stiffness of the embankment and sandmat on the construction safety of road embankment was investigated in this study by the numerical experiments using FEM. Two points was mainly focused in this study especially. First the deformation characteristics by the change of the stiffness of sand mat and embankment was investigated by the analyzing the consolidation settlement at the center of the embankment and the lateral displacement at the toe of the embankment. And, the effect of the stiffness on the stress distribution characteristics was also investigated in this study. Furthermore, slope stability analysis was carried out to gain the safe factor by change the stiffness of the sandmat and the embankment. The objective of the study is supplying the result of the numerical experiments for the geotechnical engineers who use the FEM for the safety design of the soil structures. As a result, the stiffness of the superstructures greatly affects on the deformation characteristics both in consolidation settlement and lateral displacement. However, it can be aware that it is not dominants to the stress distribution in the aspect that the no changes in the residual excess pore water pressure. Therefore, the decision of the stiffness has to be carried out deliberately considering not only the consolidation the magnitude of the settlement and the lateral displacement, but the slope stability.

• Journal of Korean Physical Therapy Science
• /
• v.3 no.4
• /
• pp.113-120
• /
• 1996

The purpose of this study was to comparison clinical applied versus theoretical fitness on axillary crutch in human stance phase. Ideal crutch length is defined as the length of the crutch, including accessories, obtained during stance when the crutch tip is 15 cm(about 6inch) lateral and 15 cm(about 6 inch) anterior to the fifth toe and the axillary pad is 5 cm(about 2 inch) below the axillay fold. The participations(volunteers) were 71 inpatients(53 men and 18 women) who have orthopedic and neurological impairment on unilateral and/or bilateral lower extrimities, and mean age was 31.4 year old. Prior to participation, each subject informed the procedures of experiment from researcher and assistant researcher. This measured for axillary crutch using each of the following aspects : (1) length of actual using crutch, (2) length of axillary fold after modified(77% of actual height), (3) angle of elbow flexion after modified(77% of actual height). In order to determine the statistical significance of result, t-test were applied at the 0.05 level of significance. The result were as follows ; 1. There was significant difference between actual crutch and ideal crutch length(77% of actual height)(p<0.05). 2. There was significant difference of length of axillary fold between actual and ideal crutch (77% of actual height)(p<0.05). 3. There was significant difference of angle of elbow flexion between actual and ideal crutch(77% of actual height)(p<0.05).

• Journal of the Korean Society of Costume
• /
• v.55 no.7 s.98
• /
• pp.62-75
• /
• 2005

This study is focused on main performers' stage costumes in the 'Swan Lake', a masterpiece of classical ballet, which Is newly represented by Matthew Bourne, a choreographer. The objectives of the study is to help understand a trend of costume in modern public performance and art. First, this paper is attempted to describe the concept and the elements of ballet costume, secondly, to consider the performance generally, and finally to analyze main performers stage costumes. This study was performed by two processes; The first was to visit theaters to view the performances in person: the classical ballet by the Bolshoi Theater Ballet, the performance by Korea national ballet academy and the Matthew Bonne's modernly redefined ballet. The second was to review the regarding literatures and DVD. There are two apparent characteristics of main performers' stage costumes in modern-style ballet compared with classic-style ballet. First, there is an approach to gender identity; the character of swan with the classic tutu that has been the culmination of femininity in the classic-style ballet, used to be represented in an established idea on ballet costume, is now substituted by a creative idea, male ballerina and trouser-style ballet costume. Second, there is an approach to breaking the convention on the purpose of emphasizing popularity arousing real sympathy and art value. Also, modern-style ballet introduces bare body and ffot rather than tutu and toe-shoes, and adapts items from casual outfit fitted in earh performer's character with a present-day life.

• Korean Journal of Applied Biomechanics
• /
• v.14 no.3
• /
• pp.1-15
• /
• 2004

The purpose of this study was to investigate the kinematic variables of the upper part of the body for 8 elderly men during walking. For this study, kinematic data were collected using a six-camera (240Hz) Qualisys ProReflex system. The room coordinate system was right-handed and fixed in space, with righted orthogonal segment coordinate systems defined for the head, trunk, and pelvis. Based on a rigid body model, reflective marker triads were attached on the 3 segments. Three-dimensional Cartesian coordinates for each marker were determined at the time of recording using a nonlinear transformation(NLT) technique with ProReflex software (Qualisys, Inc.). Coordinate data were low-pass filtered using a fourth-order Butterworth with cutoff frequency of 6Hz. Three-dimensional angles of the head, trunk, and pelvis segment were determined using a Cardan method. On the basis of each segment angle, angle-angle plot used to estimated the movement coordinations between segments. The conclusions were as follows; (1) During the support phase of walking, the elderly people generally kept their, head the flexional and abductional posture. Particularly, the elderly displayed little internal/external rotation. (2) The elderly people showed extensional and external rotation postures in the trunk movement. Particularly, It showed the change from adduction into abduction at the heel contact event of the stance phase. (3) The elderly people showed almost same pelvis movement from the flexion into extension, from the abduction into adduction, and from internal rotation into external rotation at the mid stance and toe off of the stance phase.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.4
• /
• pp.495-501
• /
• 2011

The purpose of this study was to develop the inertial sensor module system to detect gait event using single angular rate sensor(gyroscope), and evaluate the accuracy of this system. This sensor module is attached at the heel and gait events such as heel strike, foot flat, heel off, toe off are detected by using proposed automatic event detection algorithm. The developed algorithm detect characteristics of pitch data of the gyroscope to find gait event. To evaluate the accuracy of system, 3D motion capture system was used and synchronized with sensor module system for comparison of gait event timings. In experiment, 6 subjects performed 5 trials level walking with 3 different conditions such as slow, preferred and fast. Results showed that gait event timings by sensor module system are similar to that by kinematic data, because maximum absolute errors were under 37.4msec regardless of gait velocity. Therefore, this system can be used to detect gait events. Although this system has advantages of small, light weight, long-term monitoring and high accuracy, it is necessary to improve the system to get other gait information such as gait velocity, stride length, step width and joint angles.