• 한국운동역학회지
• /
• 제23권4호
• /
• pp.319-326
• /
• 2013

The objective of this study is to help golfers to select adequate putters and to provide golfers basic scientific data for improving athletic performance by showing differences of kinematic variables according to the shape of putter head. In this research three right-handed male pro-golfer who are listed at KPGA were studied and three video camera (GR-HD1KR, JVC, Japan) were used and recording speed was 60 frame/sec during the research. In this study kinematic variables were calculated using Kwon3D XP program and analysed on the 4 events and 3 phases. This study showed the following results : (1) The swing of heel-toe putter showed longer time than that of face balanced putter, and there are statistical significant difference of kinematic variables of each objective (2) As of the trajectory of putter head, heel-toe putter showed more approximating curve trajectory than that of in-between, face balanced putter on the X-axis (3) heel-toe putter showed longer distance follow-through than that of other putters by statistically significant difference on the Y-axis (4) Heel-toe putter showed longer distance swing trajectory over the ground than that of other putters by statistically significant difference on the Z-axis.

• 한국게임학회 논문지
• /
• 제14권6호
• /
• pp.39-48
• /
• 2014

바둑은 단순한 규칙에도 불구하고 매우 복잡한 전략보드 게임이다. 몬테카를로 트리탐색을 이용하여 컴퓨터 바둑 프로그램들이 접바둑으로 프로기사를 제압해 왔다. 몬테카를로 트리탐색은 전략의 개념보다는 몬테카를로 시뮬레이션에 의해 계산된 승률에 근간을 한다. 반면에 적절한 적합도 함수로 된 유전 알고리즘은 게임 내 최적 해를 찾아낼 수 있다. 삼목 게임(또는 ${\bigcirc}{\times}$게임)은 가장 대중적인 게임 중의 하나이다. 저자는 삼목 게임에서의 최선의 전략을 찾고자 했다. 실험 결과로 유전 알고리즘은 효율적인 전략들을 찾을 수가 있으며, 바둑과 서양장기와 같은 여타 보드게임들에 적용할 수 있음을 보였다.

• 대한물리치료과학회지
• /
• 제17권3_4호
• /
• pp.51-58
• /
• 2010

Purpose: The purpose of this study was to examine changes of postural sway between the normal group and treatment group of same people through COP movements. Methods: Fifty men with no history of sensory, neurological and orthopedic disorders were participated in this study. Participants were tested on single limb balance during 30 seconds on EMED system with bared foot. Each of them performed two methods and 5 trials totally each method: (1) non-treated group (2) treated group(with big toe flexion limitation). Data on the moving length, average velocity, instantaneous maximum velocity, mediolateral(x axis) maximum velocity, and anteroposterior(y axis) maximum velocity of COP were measured in single limb standing position. Results: The moving length and average velocity of COP were significant difference between normal and treatment group(p<0.05). On correlation of parameters, the faster average velocity of COP, the higher moving length, instantaneous maximum velocity, mediolateral maximum velocity, and anteroposterior maximum velocity of COP increase. The more Instantaneous maximum velocity of COP, the faster is anteroposterior maximum velocity of COP. Conclusions: Limitation of big toe flexors function affected single limb balance of the normal.

• The Journal of Korean Physical Therapy
• /
• 제8권1호
• /
• pp.33-47
• /
• 1996

This study was performed to examine the correlation between calcaneus to tibia angle and Q-angle, and the effects of step width and toe out angle on the calcaneus to tibia angle and Q-angle. The age of participated subjects was from 19 to 29 years(Mean=22.95, SD=2.23) who have no significant orthopedic and neurological dysfunction. The marking tapes for measurement of Q-angle and calcaneus to tibia angle were placed on seven location of each subject. Video data were collected while the subject walked on a walking grid. The result as follows : 1. There were significant differences in the step width, toe out angle, and Q-angle but not calcaneus to tibia angle between male and female. 2. There were significant differences in toe calcaneus to tibia angle and Q-angle n step width increased, respectively. 3. There were significant differences between tee out angle and calcaneus to tibia angle but not toe out angle and q-angle. 4. There was statistically significant correlation between calcaneus to tibia angle and Q-angle.

• 대한조선학회논문집
• /
• 제33권3호
• /
• pp.1-7
• /
• 1996

용접이음부재에서 피로강도에 큰 영향을 미치는 용접부의 응력집중계수를 추정하였다. 여기서는 하중전달형 십자필렛용접이음부를 그 대상으로 하였다. 필렛용접이음부에서 토우파괴를 일으키는 피로균열발생부인 용접토우부의 응력집중계수를 구하기 위해 인장하중하에서 토우부의 적정 요소 크기를 검토하고 여러 파라메타들의 값을 변화시켜 유한요소 응력해석을 수행하였다. 즉 용접토우부의 형상인 토우각 및 곡률반경의 영향과 용입부족부 길이의 변화를 동시에 고려한 응력집중계수를 정량적으로 구하였다. 그리고 그 결과를 이용하여 응력집중계수 추정식을 유도하였다.

• 패션비즈니스
• /
• 제11권3호
• /
• pp.1-14
• /
• 2007

This research to reveal the foot types of old males consisted of two parts. First, a questionnaire was given for 180 old men in their 60s and above who live in Busan. Second, based on this survey on the reality of shoes wearing, direct and indirect measurement were held for 200 old gentlemen. The findings are as follows: 1. Survey Results of Shoes Wearing Reality In the investigation into the reality of shoes possession and wearing, most of old males favored active casual shoes with comfortable materials (40.8%). Hardened skin (23.6%) was the greatest in foot deformation and side effects resulting from shoes wearing, while the big toe (20.1%) was most uncomfortable. The greatest requirement for comfortable shoes was shoes making feet comfortable with a good sense of wear (41.0%), followed by shoes with the soft sole to absorb shock (31.7%), shoes with diverse sizes according to shoes width (13.7%), and shoes made of soft materials in consideration of various foot shapes. 2. Results of Foot Measurement Experiments Busan's males in their 60s and above were 166.31cm (Height), 63.51kg (weight), 23.94cm (foot length), 9.75cm (foot width), and 24.26cm (instep girth). The big toe angle of old males was $11.22^{\circ}$ and the little toe angle $14.70^{\circ}$. Four foot types were classified: 1 (long big foot), 2 (small inside-developed foot), 3 (toe-tip-gathered foot), and 4 (thin flat foot).

• 한국의사학회지
• /
• 제29권1호
• /
• pp.103-116
• /
• 2016

The location of BL61 has commonly known as directly under the BL60 (Gollyun) which is at the lateral side of the heel. SP2 is located at the front of the big toe joint and SP3 is located at the rear of the big toe joint. These locations are the same with the standard acupuncture points of the WHO/WPRO. However, according to Chimgeumdongin (鍼金銅人), BL61 is located at the center of calcaneal tuberosity, which is close to the bottom of the heel, not at the side. SP2 is located at the rear of the big toe joint, not at the front. SP3 is located at the rear of sesamoid bone, not at the rear of the big toe joint. These can be also found in Douningyou (銅人形) c-544 with the same locations. Moreover, these locations are precisely equal in reference to the acupuncture classics such as < Zhenjiujiayijing : 鍼灸甲乙經 >, < Buzhutongrenjing : 補註銅人經 >, whereas the descriptions of the standard acupuncture points of the WHO/WPRO and the locations of acupuncture points in Zhenjiutongren (鍼灸銅人), Zhinjiuxueweitongren (鍼灸穴位銅人) are totally different from the acupuncture classics. Therefore, there needs to be further examinations on WHO/WPRO Standard Acupuncture Point with various acupuncture bronze men.

• 대한조선학회지
• /
• 제7권2호
• /
• pp.27-40
• /
• 1970

The distribution of stress and strain in elastic stages is investigated by the experiments of two dimensional photoelastic coating and Moire fringe method. Center block type and cover plate type of fillet welds are used as specimens in the test. The results are as follows. 1) Center block type gets less uniform stress distribution than cover plate type. And its stress concentration factor, especially at root, is larger than that at toe. 2) When main plate and cover plate closely contact and it cause friction, stress concentration decreases more than that in case of slit. That is because stress can be transmitted on the contact surface. 3) When slit is made, the outside of fillet gets more stress than the inside of it. 4) While the plastic strain distribution of center block type reaches the maximum at root and differs very slightly from that under lower loading, the plastic strain distribution of cover plate type is inclined to get the maximum at the outside of fillet rather than at root. 5) When the plastic strain value of cover plate type is compared with that of center block type at toe and root, the relations between the former and the latter shows root<toe and root>toe. 6) Because stress distribution becomes changed according to loading, fracture angle cannot be estimated by the peaks of elastic stress distribution. 7) The strain distribution just before fracture can be found by Moire fringe method.

• 한국태양에너지학회 논문집
• /
• 제36권1호
• /
• pp.19-26
• /
• 2016

Biomass has been used for energy sources from the prehistoric age. Biomass are converted into solid, liquid or gaseous fuels and are used for heating, electricity generation or for transportation recently. Solid biofuels such as bio-chips or bio-pellet are used for heating or electricity generation. Liquid biofuels such as biodiesel and bioethanol from sugars or lignocellulosics are well known renewable transportation fuels. biogas produced from organic waste are also used for heating, generation and vehicles. Biomass resources for the production of above mentioned biofuels are classified under following 4 categories, such as forest biomass, agricultural residue biomass, livestock manure and municipal organic wastes. The energy potential of those biomass resources existing in Korea are estimated. The energy potential for dry biomass (forest, agricultural, municipal waste) were estimated from their heating value contained, whereas energy potential of wet biomass (livestock manure, food waste, waste sludge) is calculated from the biological methane potential of them on annual basis. Biomass resources potential of those 4 categories in Korea are estimated to be as follows. Forest biomass 355.602 million TOE, agricultural biomass 4.019 million TOE, livestock manure biomass 1.455 million TOE, and municipal organic waste 1.074 million TOE are available for biofuels production annually.

• PNF and Movement
• /
• 제9권3호
• /
• pp.25-29
• /
• 2011

Purpose : We investigated the effect of anti-flexion taping at the proximal interphalangeal joints on the gait in stroke patients with clawing toe. Methods : Nineteen patients (mean age $63.26{\pm}9.16$ years) with clawing toe were studied. Gait performance was measured under two different conditions : (1) non-tape (2) application of tape. Gait velocity, step time and stride length were examined with the GAITRite system Results : Compared to the non-tape control condition, step time of the hemiparetic side increased significantly after the application of tape(p=0.03). There was no significant mean differences between the taped and control conditions for stride length of the hemiparetic side and velocity. Conclusion : Whilst the anti-flexion tape at the proximal interphalangeal joints changed the walking by providing significant step time effect, positive changes were noted in stride length of the hemiparetic side after tape application. These findings indicate that anti-flexion tape procedures do not significantly alter stride length of the hemiparetic side and velocity.